FingerTech Robotics

LiteTech Treads (high-quality neoprene foam tires) mated with the popular Snap Hubs give you a lightweight, shock-absorbing, high-traction solution for transferring power to the ground. Unlike hobby airplane wheels, the diameter will always be accurate and the material won't change between batches.Note: The inner holes might be a little tight on the hubs. They fit, but you may want to drill them larger to make installation easier. These wheels come in packs of two. 1.50" Diameter .08 oz each,...

LiteTech Treads (high-quality neoprene foam tires) mated with the popular Snap Hubs give you a lightweight, shock-absorbing, high-traction solution for transferring power to the ground. Unlike hobby airplane wheels, the diameter will always be accurate and the material won't change between batches.Note: The inner holes might be a little tight on the hubs. They fit, but you may want to drill them larger to make installation easier. These wheels come in packs of two. 1.75" Diameter .08 oz each,...

LiteTech Treads (high-quality neoprene foam tires) mated with the popular Snap Hubs give you a lightweight, shock-absorbing, high-traction solution for transferring power to the ground. Unlike hobby airplane wheels, the diameter will always be accurate and the material won't change between batches.Note: The inner holes might be a little tight on the hubs. They fit, but you may want to drill them larger to make installation easier. These wheels come in packs of two. 1.75" Diameter .11 oz each,...

LiteTech Treads (high-quality neoprene foam tires) mated with the popular Snap Hubs give you a lightweight, shock-absorbing, high-traction solution for transferring power to the ground. Unlike hobby airplane wheels, the diameter will always be accurate and the material won't change between batches.Note: The inner holes might be a little tight on the hubs. They fit, but you may want to drill them larger to make installation easier. These wheels come in packs of two. 2.00" Diameter .10 oz each,...

LiteTech Treads (high-quality neoprene foam tires) mated with the popular Snap Hubs give you a lightweight, shock-absorbing, high-traction solution for transferring power to the ground. Unlike hobby airplane wheels, the diameter will always be accurate and the material won't change between batches.Note: The inner holes might be a little tight on the hubs. They fit, but you may want to drill them larger to make installation easier. These wheels come in packs of two. 2.00" Diameter .14 oz each,...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

These anodized aluminum motor mounts will fit just about any small motor with mounting hole distances from 10mm - 12.5mm (0.39 - 0.49in). Especially suited to both Gold and Silver Spark motors, they will also hold all Mini Metal Gearmotors small Copal motors, Maxon motors, etc.Specifications:- Width: 16mm (0.63in)- Height: 19.8mm (0.78in)- Length: 18.6mm (0.73in)- Thickness: 1.45mm (0.057in)- Shaft height: A motor with 11mm hole spacing will raise the motor shaft up to 11.7mm (0.46in).- Seven...

Lite Hubs press into Lite Flite wheels, providing a secure and very lightweight method of mounting a wheel onto a motor shaft. The new brass collars mean you can tighten the setscrew as hard as you want without worrying about stripping the threads! Lectra Lites and 1.5" Lite Flites should be drilled out to 5/32".A dab of CA glue is recommended for a permanent fixture.Material: Nylon (same as Lite Flite wheels)Bore diameter: 3mmCan be drilled out for 1/8" motor shafts.Includes two Lite Hubs and...

If you will be mounting your Mecanum Wheels on different robots or replacing the motors and need a different shaft bore size, you will want to pick up some extra hubs.Bore is 3mm, can be drilled out to accommodate up to 1/4" shaftsIncludes 6-32 setscrew4x 4-40 tapped holes on a 3/4" bolt circle0-FT-MECHUB-M CAD File

If you will be mounting your Mecanum Wheels on different robots or replacing the motors and need a different shaft bore size, you will want to pick up some extra hubs.Bore is 3mm, can be drilled out to accommodate up to 1/4" shaftsIncludes 6-32 setscrew4x 4-40 tapped holes on a 3/4" bolt circle0-FT-MECHUB-P CAD File

Use the Mecanum Wheels to add omni-directional capabilities to your robot.What can they do? The four Mecanum wheels are each connected to a separate motor with independent control. The robot can move forward, backward and turn just like it would with four regular wheels. The configuration of rollers at 45 degrees also allows the robot to translate sideways, and through a combination of movements, drive in any direction - even while spinning! How do they work? Adjacent corners of the robot use...

Has your robot been lacking a high-current power switch? Tired of plugging and unplugging the battery during an intense competition? The Mini Switch can be activated with the simple twist of an allen key. No other switch is as small, lightweight and powerful!SpecsMaterial: High-temperature nylon, copper terminals, aluminum screwDimensions: 12.7 x 12.7 x 6.35mm (0.5 x 0.5 x 0.25in)Copper terminals: 3.5mm x 1mm (0.138 x 0.04in) extend 6.35mm (0.25in) from switch bodyWeight: 2.15grams...

When you don't want to solder every wire connection, these push-wire terminal blocks are a convenient solution. Easily connect and disconnect up to four 18ga wires to a common connection point. Includes one red and one black terminal block for positive and negative (ground) connections.SpecsIncludes one red and one black push-wire 4-terminal block.Material: Glass-filled nylon, 0.20m Beryllium Copper retainer tabsDimensions (each): 11.0 x 9.8 x 6.6mm (0.43 x 0.39 x 0.26in)Weight (each):...

The inexpensive T6A Radio Transmitter requires a PC cable to modify any of the channel variables including mixing and servo reversing. (Download the T6 Manual.)The program is free and can be downloaded below (includes WinXP driver and T6config program).If you are running Vista, you will need to install the Vista driver insteadFor Windows 7 and 10, download the Windows 7-10 DriverThe program we supply in our transmitters is hk-t6a-Viper-mixed-R2Or if you prefer tank steering: hk-t6a-Viper-tank-R...

The RadioLink T8S transmitter is a lightweight and comfortable gamepad-style transmitter, with 8 channels of control all easily within reach. Programmable per-channel failsafes, endpoint adjustment, subtrims, servo reverse, dual rates, throttle curves, and 4 custom programmable mixes. Includes R8EF receiver, micro USB cable for programming/charging, spring-return kit for tank drive, FingerTech lanyard for holding the transmitterThe RadioLink T8S transmitter is a lightweight and comfortable...

• This Brushless Inrunner is what is used in the FingerTech Beater Bar Electronics. Its size and power make it ideal for beetleweight robot weapons (and aggressively ambitious for antweight weapons!)• With an inrunner, you don't have to worry about wires getting caught by a spinning outer can.Specifications:RPM/V: 2970kvMax Load: 22AMax Volts: 14.8v 2s~4sMax Watts: 300wResistance: 0.0500ΩWeight: 98.71gMotor Diameter: 28mm (1.10in)Motor Length: 38mm (1.49in). 50mm (2.16in) to end of...