Suspension & Steering

This is a replacement Traxxas 17mm Hub Retainer Set, and is intended for use with the optional TRA5853X & TRA6856X 17mm wheel adapters for the Traxxas Slash, Stampede and Rustler trucks.0-TRA5854

0-TRA5323R

ALUM CAPS, PIVOT BALL HEX WRENCH0-TRA7033X

0-TRA6837R

This is a Package of Eight 5mm x 8mm Bearings from Traxxas.FEATURESStandard bearings.INCLUDESEight 5mm x 8mm BearingsREQUIREMENTSAssembly into the model.SPECIFICATIONSHeight: 2.5mmInner Diameter: 5mmOuter Diameter: 8mm0-TRA4606

0-TRA5115A

0-TRA5119A

BBS BLUE RUBBER SEALED 6 X 13M0-TRA5180

0-TRA2658

Body, Ultra Shock(s) (long) (grey) (2)0-TRA3765A

Body, Ultra Shock(s) (XXL) (grey) (2)0-TRA3766A

0-TRA7468X

0-TRA5536

0-TRA7038

This is the Input and Output Shaft for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FEATURESSteel constructionBlack in colorINCLUDESOne Input ShaftOne Output ShaftREQUIREMENTSInstallation on the vehicle0-TRA7092

This is the Integy Rear Suspension Kit for the Traxxas 1/10 scale Telluride 4x4FEATURESBillet machined aluminum construction, blue in colorNylon inserts in pivot pointsReplaces stock plastic suspension arms and uprightsINCLUDESTwo Rear Suspension ArmsTwo Rear UprightsTwo Steel PinsFour Screws and two WashersREQUIREMENTSFour 5x11mm Ball Bearings, order DTXC15470-C25809BLUE

0-TRA6742

PLASTIC WASHERS 5 X 8MM (R&S)0-TRA3685

PUSH ROD (MOLDED COMPOSITE) (40-TRA7018

0-TRA7429

SHOCK TOWER, REAR0-TRA6838

This is the 7032 Suspension Arm Set Rear Upper Lower VXL from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.0-TRA7032

0-TRA8651

ROCKER ARM SET LONG TRAVEL 120-T USED W/# 5318 OR # 53180-TRA5356

This is the Servo Case with Gaskets for the Traxxas VXL Micro Waterproof ServoFEATURESNylon constructionBlue in colorINCLUDESOne Servo Case (Top, Middle, and Bottom Sections)Five GasketsInstruction sheetREQUIREMENTSInstalling remaining servo components0-TRA2081

0-TRA5545X

This is a Complete Accessory Package of Replacement Steering and Throttle Servo Horns for the Traxxas Revo Truck.FEATURESBlack and grey plastic constructionINCLUDESFour throttle servo horns (Airtronics/Sanwa, Hitec, KO Propo/Fut, JR)Eight steering servo horns for the above mentioned radio brandsREQUIREMENTSNothing. These are direct replacement parts.0-TRA5345X

These are the GTR Shock Springs for use on theTraxxas 1/16 E-Revo VXL 4WD RTR.FEATURESSteel constructionRed in colorGreen1.92 rateINCLUDESTwo Shock SpringsREQUIREMENTSInstallation on the shocksSPECIFICATIONSLength: 22mm (0.87")Outer Diameter: 13.75mm (0.54")Inner Diameter: 11mm (0.43")Wire Diameter: 1.3mm (0.05")0-TRA7146

This is the Throttle Return Spring for the Traxxas Revo.FEATURESZinc coloredSteel constructionINCLUDESTwo springsREQUIREMENTSInstallation on the RevoSPECIFICATIONSLength: 1-1/2" (38mm)Diameter: 3/16" (4mm)0-TRA4046

0-TRA7054

0-TRA2536

0-TRA7438

0-TRA6854A

0-TRA6731

Fiber Washers 5x8mm (20)0-TRAC7985

Specs35 oz-in torqueTransit time 0.20 sec/60degLength: 0.87" (22mm)Width: 0.47" (12mm)Height: 0.87" (22mm) 0-TRA2060

Left & Right Caster Blocks0-TRA2432

Bellcrank Bushings (4)0-TRA2545

Steering Block (2)0-TRA3636

Stub Axle Carriers0-TRA3652

Steering Blocks VXL Series (2)0-TRA3736

Steering Bellcrank0-TRA3743

Blue Anodized Steering Blocks & Axle Housings0-TRA4336X

Rear Left & Right Bulkheads0-TRA4929R

Ball Bearing, 5x8x2.5mm0-TRA5114

Rubber-sealed ball bearings provide smooth, long-lasting and precise driving. Especially in dirt environments, rubber-sealed ball bearings provide the ultimate protection. 0-TRA5116

Ball Bearing, 6x12x4mm: TMX3.3, Revo, SLY (2)0-TRA5117

Ball bearings, blue rubber sealed (8x16x5mm) (2)0-TRA5118

Ball Bearing, 12x18x4mm (2)0-TRA5120

Adjustable Suspension Arm Set0-TRA5333R

Left/Right Caster & Steering Blocks0-TRA5532

Turnbuckle Camber Links, 58mm (2)0-TRA5539

Steering Bellcrank Posts (2)0-TRA5544

Front/Rear Suspension Pin Set0-TRA7021

GTR Shock Shaft (2)0-TRA7063

Tin Coated GTR Shock Shaft (4)0-TRA7063T

GTR Spring Shock, Orange (2): VXL0-TRA7145

GTR Spring Shock, Black (2): VXL0-TRA7148

Progressive-2 Rocker Arm Post Set0-TRA7158

This is the optional Ball Bearing Set for the LaTrax Teton Monster Truck from Traxxas. Steel construction offers smoother operation and longer life than bushings. Replaces all bushings used in the hub carriers, diff assembly, and driveshaft.IncludesTwo 4x8x3mm Ball BearingsEight 6x10x3mm Ball BearingsFive 8x12x3.5mm Ball Bearings0-TRAC9804