LiPoly Accessories

This extension is for Thunder Power 4S and 5S packs to extend the battery away from the balancer/charger. 12.75in. long.0-TP6PEXTENSION

This adapter cable set allows you to connect 2S 7.4V, 3S 11.1V, 4S 14.8V and 5S 18.5V Thunder Power (and compatible) balance connector equipped batteries to E-flite JST XH (and compatible) balance connector equipped balancers and balancing chargers.FeaturesIncludes adapter cables for use with 2S 7.4V, 3S 11.1V, 4S 14.8V and 5S 18.5V batteriesFor use with Thunder Power (and compatible) balance connector equipped batteries and E-flite JST XH (and compatible, such as Align, Parkzone and more)...

Lipo battery connection board for Kokam-style balance connectors. Works for 2-6 cell packs. For use with the Bantam E-Station BC5, BC6, BC6-10 and PB6 chargers and balancers. 0-BAN-EAC128

The Lipo Fuel Gauge is the easiest way to see how much run time you have left on your Lipo batteries, whether you're in the air or on the ground. The simple color-coded LED lights show you instantly whether you can continue using your battery or if it's time to recharge. Over-discharging is one the most common ways Lipo batteries are damaged, so the Lipo Fuel Gauge is a key tool to ensure your batteries' longevity.Dimensions (including pins): 76mm x 22mm x 4mmWeight: 5 gram0-CSRFGAUGE-14...

This adapter allows you to plug any Thunder Power pack up to 5S into the Ultra-Balancer, Balance Pro or Cell Spy Plus. It narrows any pins with 2.5mm spacing down to 2mm spacing.0-TP2UB

For 2-Cell LiPos0-CSWIRE-2S

Stop spending so much time charging and spend more time flying! With the JST-6 you can charge up to six lipos at one time!Perfect for charging LiPos that fit:Blade 120SRBlade mQXAny other single cell battteries utilitizing JST-6 connectorsHow the JST-6 worksThis adapter is designed to allow you to connect up to six LiPo batteries with the same capacity with JST plugs to the LiPo charger of your choice.For example, if you connect three of our 3.7V 600mAh 35C lipos to the JST-6, your charger...

This adapter is to use 11.1 volt (3 cell) PolyQuest or Hyperion packs with Common Sense RC V2 products.0-PQ2CS-3-V2

This adapter is to use 7.4 volt (2 cell) PolyQuest or Hyperion packs with Common Sense RC V2 products.0-PQ2CS-2-V2

This extension is for Thunder Power 2S and 3S packs to extend the battery away from the balancer / charger. 12.75" long.0-TP4PEXTENSION

Conversion cable for TP to Align style JST XH adapter. This adapter will convert your TP 5S (6 pin) balance tap to 5S Align Style (JST XH) balance tap.0-TPTOALIGN5S

Conversion cable for TP to Align style JST XH adapter. This adapter will convert your TP 6S (4 pin and 6 pin) balance tap to 6S Align Style (JST XH) balance tap.0-TPTOALIGN6S

This Universal Balancing Adapter Board works with the three major types of balance connectors for 2S to 6S lipos and plugs right into most popular models of 6S balancing chargers including the ACDC-6, B6 Duo, B6 Ultimate, Q6 charger and many brands and models of lipo battery chargers that have 7-pin balance ports with 2.5mm pin spacing.Supports the following connector types:JST-XH: Common Sense RC™, E-Flite, ParkZone, ESky, Align, Turnigy, Zippy, and many other lipo brandsJST-TP: Thunder...