Products 1-20 of 20
Show
12in. Encoder Cable and Transition Board for MDC2230, MDC2460 and XDC2230
Price: $26.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-ENC1 -

12" Cable and transition board for connecting two encoders to Brushed Motor Controllers. Includes 6-pin Microfit connector for MDC2xxx and XDC2xxx dual-channel controllers. Transition board has two sets GND, 5V, A, B solder pads pads for connecting encoders.RTQ-CABLE-ENC1

15-pin to RC Radio Cable for xDC/xBL-models Controllers
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-RC2 -

15-pin male DSub connector with 3 standard jacks for RC radios. Plugs in all Roboteq motor controllers equipped with 15-pin connectors: SDC2xxx, MDC1xxx, MDC2xxx, XDC2xxx, SBL1xxx, MBL1xxx.RTQ-CABLE-RC2

25-pin to RC Radio Cable for HDC/HBL-model Controllers
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-RC5 -

25-pin male DSub connector with 3 standard jacks for RC radios. Plugs in all Roboteq motor controllers equipped with 25-pin connectors: FBL2xxx, FDC3xxx, FIM2xxx, SBL2xxx, RGBL1xxx, RGBL1xxx, RGDC1xxx, RGIM1xxx, HDC2xxx, HBLxxxxRTQ-CABLE-RC5

ABC Dual Hall Cable for Dual Channel Brushless Controllers
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-ABCX2 -

ABC Hall Cable and transition board for dual channel Brushless Motor Controllers. Includes dual row 2x5-pin Microfit connector for FBL2xxx, FIM2xxx, HBL2xxx dual channel controllers. Transition board has two sets of GND, 5V, A, B C solder pads pads for connecting hall sensors.RTQ-CABLE-ABCX2

ABC Single Hall Cable for Single Channel Brushless Controllers
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-ABCX1 -

Single row ABC Hall Cable and transition board for Brushless Motor Controllers. Includes 6-pin Microfit connector for MBL1xxx, HBL1xxx single-channel controllers and for SBL2xxx, GBL2xxx dual channel controllers. Use two cables for dual channel controllers. Transition board has GND, 5V, A, B C solder pads pads for connecting hall sensors.RTQ-CABLE-ABCX1

ABC Single Hall Cable for Single Channel SBL Controllers
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-ABCX1M -

Single row ABC Hall Cable and transition board for Brushless Motor Controllers. Includes 5-pin miniature JST connector for SBL1xxx controllers. Transition board has with GND, 5V, A, B C solder pads pads for connecting hall sensors.RTQ-CABLE-ABCX1M

BOB15 Break out Board
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: BOB15 -

Break-out board with 15-pin male DSub connector. Plugs in all Roboteq motor controllers equipped with 15-pin connectors: SDC2xxx, MDC1xxx, MDC2xxx, XDC2xxx, SBL1xxx, MBL1xxx. Brings all of the controller's IO to pads for easy soldering of potentiometers, switches, relays or other accessories. A 9-pin female DSub connectors carries the controller's RS232 signals for direct connection to PC's standard COM port. Use not included 9-pin DSub to 9-pin DSub cable for PC to break-out board...

BOB15 with 6 foot RS232 cable
Price: $25.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-BOB15 -

Break-out board with 15-pin male DSub connector. Plugs in all Roboteq motor controllers equipped with 15-pin connectors: SDC2xxx, MDC1xxx, MDC2xxx, XDC2xxx, SBL1xxx, MBL1xxx. Brings all of the controller's IO to pads for easy soldering of potentiometers, switches, relays or other accessories. A 9-pin female DSub connectors carries the controller's RS232 signals for direct connection to PC's standard COM port. Includes 9-pin DSub to 9-pin DSub cable for connection to a PC. Replaces obsolete RS1...

BOB25F Break out Board
Price: $25.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: BOB25F -

Break-out board with 25-pin male DSub connector. Plugs in all Roboteq motor controllers equipped with one 25-pin connectors: FBL2xxx, FDC3xxx, FIM2xxx, SBL2xxx, RGBL1xxx, RGBL1xxx, RGDC1xxx, RGIM1xxx. Brings all of the controller's IO to pads for easy soldering of potentiometers, switches, relays or other accessories. A 9-pin female DSub connectors carries the controller's RS232 signals for direct connection to PC's standard COM port. Use not included 9-pin DSub to 9-pin DSub cable for PC to...

CABLE-DS9 Cable
Price: $20.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-DS9 -

9 pin D-Sub cable six feet length male/female9 pin D-Sub cable six feet length male/female.RTQ-CABLE-DS9

CABLE-S_PWRCTL Cable
Price: $4.49
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-S_PWRCTL -

Cable for connecting PwrCtl voltage to the SDC/SBL controllersRTQ-CABLE-S_PWRCTL

CABLE-S_PWRCTL Cable
Price: $4.49
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-S_PWRCTL -

RTQ-CABLE-S_PWRCTL

CABLE-USB-232-CONV Cable
Price: $31.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: CABLE-USB-232-CONV -

The USB-232-CONV converter allows the connection of a PC USB port to the RS232 port of a Roboteq controller, allowing the PC communication to the controller in these instances where a direct USB connection is not desired.RTQ-CABLE-USB-232-CONV

DC-DC, 48V to 24V, 5A, Waterproof Step-down Volt Converter Power Supply with Aluminum Shell
Price: $60.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: PWR-48DC24 -

DC/DC converter with wide ranging input voltage and fixed 24C outputInput Voltage: DC 37V to 60VOutput Voltage: DC 24VOutput current: 5A. Max 10AAdopts synchronous rectification technology, low heat and high efficiencyAluminum shell, waterproof, shockproofMultiple protection function: output over-current protection, soft-start protection, chip over-temperature protection (No reversal protection, do NOT reverse)Working temperature: -40 °c ~ +85 °c (industrial temperature)Efficient...

RoboteQ CABLE-KBLx1
Price: $26.99
View
Availability: Temporarily Unavailable
Item #: CABLE-KBLx1 -

Cable for the circular connector on KBL1XXX controllers. 8 color-coded wires for Hall, encoder, and sin/cos input as well as digital outputs.RTQ-CABLE-KBLx1

RoboteQ CABLE-RGBx1
Price: $27.00
View
Availability: Temporarily Unavailable
Item #: CABLE-RGBx1 -

Cable for the circle connector on RGBL controllers. 8 color-coded wires for Hall, encoder, and sin/cos input as well as digital outputs.RTQ-CABLE-RGBx1

RoboteQ CABLE-SENx1
Price: $26.99
View
Availability: Temporarily Unavailable
Item #: CABLE-SENx1 -

6ft cable for the circular connector on MGSW1600, MGSW3200, MGSW4800, OTS1600 and FLW100 sensors. 8 color-coded wires for sensor IO.Connector TypeRTQ-CABLE-SENx1

RS232-Isolator
Price: $40.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: RS232-Isolator -

This product optically isolates the three RS232 lines: Tx, Rx and GND. This will protect your serial devices from transient surges and ground loops up to 5000V in each direction. It is port powered so no external power is necessary.RTQ-RS232-Isolator

RS232-TTL-Adapter
Price: $21.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: RS232-TTL-Adapter -

This adapter helps to convert TTL (Transistor-Transistor Logic) level signals to RS232 interface of the RoboteQ motor controllers.This converter has a Male DB9 connector, suitable for use with RoboteQ BOB15 and BOB25 break-out boards.Compatible with Arduino, Raspberry Pi, and any other micro controller that uses TTL serial communication.Ultra compact board size: 15 x 14 mm, DB9 Male Connector (RS232), supports 3V to 5.5V power supply, 4 pin through hole: GND, Logic out (TX), Logic In (RX), VCC...

USB Isolator
Price: $73.00
View
Availability: Temporarily Unavailable
RoboteQ Item #: USB-Isolator -

Full speed USB 2.0 compliant port isolator with a 1000V isolation voltage. This device protects your PC or laptop while connecting USB devices wired to high voltages. It is a sealed device with three connectors for connecting with USB-Host, USB-Device and an optional port for an additional power supply (8-15VDC).RTQ-USB-Isolator