Team Associated

SC10 10 X 16mm Bearing0-ASC9832

This is the RC18 16T Pinion Gear from Team AssociatedTeam Associated RC18T RTR racing truck.FEATURESSteel construction, silver in colorINCLUDESOne 16T pinion gearOne 3x3mm set screwREQUIREMENTSInstallation onto the motor shaftSPECIFICATIONSLength: .39" (10mm)Mounting hole diameter: 2mm0-ASC21158

18T MIP CVD Assemblies0-ASC21230

This is the stock Steel Turnbuckle Set for the Associated 18T2 Off-Road Truck.FEATURESSteel constructionBlack finishINCLUDESSix TurnbucklesREQUIREMENTSInstallation following the instruction manual0-ASC21343

0-ASCC3357

0-ASCC3338

This is the Factory Team Front Belt for the Associated RC18T2 and B2.FEATURESDirect fit replacement partINCLUDESOne front beltCOMMENTSThis belt only works with the RC18T2 and RC18B2 vehicles.0-ASC21328

This is the Factory Team Rear Belt for the Associated RC18T2 and B2.FEATURESRubber construction with center reinforcementINCLUDESOne rear beltCOMMENTSThis belt only works with the RC18T2, RC18B2 and RC18LM vehicles.0-ASC21329

0-ASCC8626

4X4 Belt Cover Cap0-ASC91089

0-ascc1025

0-ASCC1020

0-ASCC1013

This is a replacement Team Associated Front & Rear Pulley Set, and is intended for use with the Associated SC10 4x4.0-ASC91167

0-ASCC1031

0-ASCC1041

These are the Wheel Hexes for the Associated SC10 4x4 Truck.FEATURESPlastic constructionSteel pins and crush tubesINCLUDESTwo Wheel HexesTwo Front Axle Crush TubesFour PinsREQUIREMENTSInstalling on caster block assembly at each wheel0-ASC91027

0-ASCC1006

0-BRPC0610

0-ASCC3436

This is a package of (2) 4-40 turnbuckles. They are 2.06" long with a hex-shaped piece in the middle, which when turned by a wrench makes the linkageassembly lengthen or shorten (the threaded portions are reverse threaded onone side). These are made of steel and are black in color.0-ASC6263

This is the replacement 25 Degree Caster Block for the Team AssociatedRC10GT2 RTRThis will also work as a replacement for the 30 Degree Blocksthat come with the RC10GT2 Factory Team.FEATURESComposite nylon construction, black in colorReplaces worn or damaged caster blocksINCLUDESTwo 25 degree caster blocks0-ASCC7919

0-ASCC6712

0-ASCC8995

0-ASCC9462

0-ascc9472

Team Associated 89536 Rc8.2 Swaybar Pivot Ball0-ASCC9536

0-ASCC9537

0-ASCC1560

0-ASCC1035

0-ASCC6155

0-ASCC9564

These are the replacement pivot balls for the Associated Dual Sport anti-roll (swaybar) kits.Includes:Four aluminum balls (4mm) with steel set screws.Comments:These are the balls that come with anti-roll kits.0-ASC8830

ASC7932 REAR HUB,-1.5 DEGREE TOE-IN,LEFT & RIGHT: RC10GT20-ASC7932

These are 1/8" Washers from Team Associated.FEATURES#4 flat steel washers.For use with 4-40 bolts and nuts.INCLUDES12 Washers0-3216

0-ASCC6740

0-ASCC6782

0-ASCC1097

0-ASCC9880

This is the Factory Team Blue Aluminum Front Bulkhead for the AssociatedRC10GT2 Factory Team.This is also a hop-up for the RC10GT2 RTR.FEATURESAluminum construction, blue in colorReplaces a worn or damaged bulkheadINCLUDESOne aluminum front bulkheadFour 4-40 x .093" set screws (.05 hex size use DTXR0388 to install)REQUIREMENTSInstallation following the model manualSPECIFICATIONSLength: 1.83" (46mm)Width: .85" (21mm)Height: .33" (8mm)0-ASCC7990 ...

0-ASCC7447

0-ASCC1124

0-ASCC7485

This is the 4x06mm Flat Head Cap Screws from Associated.FEATURESMetal construction, black in colorINCLUDESTen 4 x 06mm screwsREQUIREMENTS2.5mm hex wrench0-ASC89213

This is the Front Trailing Axle for the Team Associated RC10T4.FEATURESSteel constructionINCLUDESTwo front axlesSPECIFICATIONSLength: 1.3" (33mm)Diameter of axle: 3/16" ( 4mm)0-ASC7456

This is the optioanl Blue Graphite Battery Brace for the Team Associated RC18T RTR racing truck.FEATURESGraphite construction, blue in colorINCLUDESOne graphite battery strap for 6 cell batteryREQUIREMENTSInstallation following kit manualSPECIFICATIONSLength: 4.75" (120mm)Width: .57" (14.5mm)Thickness: .070" (1.8mm)0-ASC21238

0-ASCC8526

These are the Front KMC Black Wheels for use on the Associated SC10 2WD Race Truck KitFEATURESNylon constructionBlack in colorINCLUDESTwo Front KMC Black WheelsREQUIREMENTSTires, ASCC9809Tire GlueSPECIFICATIONSOuter Diameter: 75.75mm (3")Width: 41mm (1.6")Inner Diameter: 4.8mm (0.2")0-ASCC9807

0-ASCC9841

0-ASCC9806

This is the replacement Outer Hinge Pin Set for the Team Associated RC10GT2.IncludesTwo .11" (3mm) x 1.3" (33mm) rear outer hinge pinsTwo .11" (3mm) x .9" (23mm) front outer hinge pinsTwo .11" (3mm) x .9" (23mm) front king pins 0-ASCC7927

This pinion gear bag includes one 19T 48P pinion gear, and one 4-40 set screw.0-ASCC5256

This pinion gear bag includes one 21T 48P pinion gear, and one 4-40 set screw.0-ASC8258

This pinion gear bag includes one 22T 48P pinion gear, and one 4-40 set screw.0-ASC8259

This is the optional Tekno Front V3 CVA for the Associated RC8.FEATURESSteel constructionBlack in colorINCLUDESOne Front CVAREQUIREMENTSInstallation on the vehicleSPECIFICATIONSLength: 36.5mm (1.4")Shaft Diameter: 3.5mm (0.14")0-TKR400913F

0-ASCC9604

These are the Spoked Wheels in White for the Team Associated 18R Rally Car series.FEATURESPlastic construction, white in colorINCLUDESTwo Spoked Wheels in White for the Team Associated 18R Rally CarsREQUIREMENTSTires, ASCC1200SPECIFICATIONSWidth: 0.87" (22mm)Diameter: 1.3" (33mm)0-ASC21288

0-ASCC9577

3/16X3/8 Rubber Sealed Bearings (2)0-ASC3977

This is the Ball End Washers for the Team Associated RC10B4 kits.FEATURESAluminum ball end washersINCLUDESTen ball washersREQUIREMENTSNothingSPECIFICATIONSDiameter: 3mmCOMMENTSWill work for the RC10B4 buggy.0-ASC9630