Products 1-8 of 8
Show
Availability: In Stock
E-flite
Item #: EFLM1160H -
Availability: Back Order
Dynamite
Item #: dynm3940 -
6P BL 1000KV 56X87MM WP MARINE MOTORTHIS IS AN OP[EN BOX ITEM, IT MAY SHOW SIGNS OF WEAR, BUT HAS NOT BEEN USED. Includes box and everything as was new.0-dynm3940
Featured!
Availability: In Stock
DYS
Item #: BX2112L -
Works with Phantom, Phantom 2,Phantom 2 Vision, F450, F550, E300 or any Quadcopter system that you can fit the motor.Specifications:KV ----------------------------------------------- 920Configu-ration -------------------------------- 12N14PShaft Diameter ------------------------------- 3mmMotor Dimension(Dia.*Len) -------------- Φ28х24Weight(g) --------------------------------------- 48gldle current(10)@10v(A) ------------------- 0.4ANo.of Cells(Lipo) ----------------------------- 3-6SMax...
Availability: Discontinued
E-flite
Item #: EFLM3032DFA -
E-flite's BL32 DF Brushless Motor is an ideal choice for products such as E-flite's Habu 32 DF and other similar-sized ducted fan airplanes when using the purpose-built Delta-V 32 80mm EDF (EFLDF32). The motor will provide great performance in 80mm diameter fan units requiring a 28mm inrunner motor.FEATURES6-pole designIdeal for 80mm EDF UnitsIncludes mounting hardwarePurpose-built for the E-flite® Delta-V® 32 80mm EDF unitUp to 1,400 continuous input watts or 1,665 maximum...
Availability: Back Order
FingerTech Robotics
Item #: FT-D2822-17 -
This D2822/17 Brushless Outrunner is what isused in the FingerTech Viper Vertical and Horizontal Spinner Add-Ons. Its size and power make it ideal for antweight robot weapons.Specifications:KV: 1100rpm/VMax Voltage: 7.2V-11.1V (2S-3S)Max Watts: 102WMax Current: 9.9AMax Resistance: 0.192ΩWeight: 41g (1.44oz)Motor Diameter: 28mm (1.10in)Motor Length: 21.35mm (0.84in). 25.66mm (1.01in) to end of hub extension.Wire Length: 56mm (2.2in)Plug Type: 3.5mm female bullet connectorsShaft Diameter:...
Availability: In Stock
FingerTech Robotics
Item #: FT-BTRBR-ELEC -
This Brushless Motor and ESC combo are perfect for spinning the FingerTech Beater Bar. Can be run on 7.4V or 11.1V for up to 16k RPM! Includes motor, mount, speed controller, and S3M pulley/belt.Specifications:Pulley reduction: 2:1Beater bar speed @ 7.4V: 11,000RPM theoreticalBeater bar speed @ 11.1V: 16,500RPM theoreticalTotal Weight: 145grams (5.11oz)Beater bar/motor shaft center-to-center distance: 66.0mm (2.60in)Includes:1 - FingerTech S2838-2970KV Brushless Inrunner Motor (includes bullet...
Availability: Available
FingerTech Robotics
Item #: FT-S2838-2970KV -
• This Brushless Inrunner is what is used in the FingerTech Beater Bar Electronics. Its size and power make it ideal for beetleweight robot weapons (and aggressively ambitious for antweight weapons!)• With an inrunner, you don't have to worry about wires getting caught by a spinning outer can.Specifications:RPM/V: 2970kvMax Load: 22AMax Volts: 14.8v 2s~4sMax Watts: 300wResistance: 0.0500ΩWeight: 98.71gMotor Diameter: 28mm (1.10in)Motor Length: 38mm (1.49in). 50mm (2.16in) to end of...
Availability: Discontinued
Tiger Motor
Item #: TMOATM07009 -