Products 1-9 of 9
Item #: PWR-48DC24 -
DC/DC converter with wide ranging input voltage and fixed 24C outputInput Voltage: DC 37V to 60VOutput Voltage: DC 24VOutput current: 5A. Max 10AAdopts synchronous rectification technology, low heat and high efficiencyAluminum shell, waterproof, shockproofMultiple protection function: output over-current protection, soft-start protection, chip over-temperature protection (No reversal protection, do NOT reverse)Working temperature: -40 °c ~ +85 °c (industrial temperature)Efficient...
Availability: In Stock
Item #: DYS30055 -
Input: 5-30V (2-8S LiPo, 5-24 NiMH)Output: 5V, 5A continuousWeight: 0.63oz (18g)0-DYS30055
Common Sense RC
Item #: VR-HD-ADJ -
This Heavy Duty Adjustable High Current Voltage Regulator allows you to use a 2-cell 7.4V LiPo battery pack to power your servos. They react faster and with more torque. You will also get the addded benefit of consistent voltage to your servos. With a normal RX battery pack, voltage decreases, and your servos slow down as the day goes by. This unit is designed to handle 30 watts of power dissipation. Input voltage: 6.0V - 8.4VOutput voltage: 5.4V - 6.0VInput voltage must be at least 0.65V more...
Item #: FIRMTRONICS-SBEC5 -
BEC (Battery-Elimination Circuit) provides a constant 5V to your receiver and/or servos. Simply connect the red and black leads to your (switched) main battery inputs, and plug the RC connector into any port of your receiver, and now you can ditch that bulky reciever battery pack! The 5V models are optimized to supply your standard RC receiver with the power needed to operate.S-BEC is a highly integrated and sophisticated switch-mode power supply operating from 5.5V to 50V input and producing...
Item #: FIRMTRONICS-SBEC6 -
BEC (Battery-Elimination Circuit) provides a constant 6V to your receiver and/or servos. Simply connect the red and black leads to your (switched) main battery inputs, and plug the RC connector into any port of your receiver, and now you can ditch that bulky reciever battery pack! The 6V models are optimized to supply your standard RC receiver with the power needed to operate. S-BEC is a highly integrated and sophisticated switch-mode power supply operating from 5.5V to 50V input and producing...
Item #: SPORTBEC -
SportBEC is the higher capacity version of our best-selling ParkBEC product. SportBEC powers your receiver and servos much more efficiently than a standard BEC. As many as 8 servos can be powered without worrying about an overheating BEC. SportBEC works great up to very high voltages, and is especially suited for "sport" aircraft and glow conversions. SportBEC is usually a necessity at 4s and above when running high torque or digital servos.SportBEC's output is selectable between 5V/6V using a...
Item #: SmartBEC -
The SmartBEC adds the benefits of a switching BEC and a lithium-aware LVC to your flight system. It is a great choice for anyone looking to upgrade their non-lithium aware system to use higher voltage lithium batteries. SmartBEC features a soft lithium cutoff, so you don't have to worry about making an emergency dead-stick landing. When the battery is nearly depleted, the power output of the motor is progressively scaled down. Once the plane begins to feel sluggish, it's time to set up for a...
Common Sense RC
Item #: UBEC-3A -
This high-quality 3A UBEC switching DC-DC regulator is used when your ESC doesn't have a BEC or when your onboard BEC won't handle your needs. When supplied with a 2-6 cell lithium battery (or 5-18 cells NiMH /NiCd ), it outputs consistent, safe voltage for your receiver, gyro and servos. Provides much greater power efficiency than a linear mode UBEC.FeaturesDesigned with an advanced switch mode DC-DC regulator IC.The output is powerful even working with 4 to 6 cells lipo batteries.Battery...
Availability: In Stock
Item #: DYS30053 -
Continuous Current: 3ABurst Current (>10s): 5ABEC Output: 5V@3AInput Voltage: 2~5S (Lipoly)Weight: 11.5g including ferrite ring wire and connectorProgrammable: NoB016Y0BQ8Y0-DYS30053