Products 49-67 of 67
Show
AmpFlow M30-450 Motor
Price: $89.00
View
Availability: Available
Item #: M30-450 -

These standard motors are designed to give good performance and great value. The M30-450 motors have a slightly lower power output (450 W) in a much smaller package. Specs Watts - Continuous 450 Diameter 3.0 in. Length 4.9 in. Efficiency 80% No-Load RPM @ 24V 3700 Output Shaft 11-Tooth #25 Sprocket Weight 4.5 lb The above specifications are for 24V. The motors can also be used at 12V or 18V. The RPM is proportional to the voltage so running at 12V will result in half the no-load RPM that is...

AmpFlow G43-500-M Motor
Price: $79.00
View
Availability: Available
Item #: G43-500-M -

These standard motors are designed to give good performance and great value. The big G43-500 motors work great for applications that require sustained power output of up to 500 Watts (0.67 horsepower). These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 500 Diameter 4.3 in. Length 5.3 in. Efficiency 80% No-Load RPM @ 24V 3300 Output Shaft 11-Tooth #25 Sprocket Weight 9.0 lb The above...

Solo 300A, 60VDC Motor Controller
Price: $499.99
View
Availability: Available
Item #: RC-SOLO300 -

Feature Overview: 300A Continuous Quadrature Decoding 9.8 million PPS Decoding Multimode Interface TTL Serial USB Port Analog Interface R/C Input Control Limit, Home and E-Stops Up to 60VDC Operation Cooling Fan With Automatic Control 3.3v Compliant Control Outputs 5v Tolerant Control Inputs Programmable Current Limiting Programmable Voltage Clamping Closed and Open Loop Operation Auto Tuning PID Feature Mixed Control Modes Data Logging Diagnostic LEDs Field Firmware Updates Regulated 5VDC,...

AmpFlow F30-400 Motor
Retail: $290.00
Price: $289.00
View
Availability: Available
Item #: F30-400 -

AmpFlow motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of less expensive ferrite magnets. The mid-range motors, (F30-150 and F30-400), are designed for the highest performance and efficiency while still using the less expensive ferrite magnets. These motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing, motorized scooters,...

AmpFlow F30-400 Motor with Speed Reducer
Retail: $480.00
Price: $479.00
View
Availability: Available
Item #: F30-400-G -

The AmpFlow speed reducer is a heavy-duty, low-cost, gearhead that works with any of the three-inch diameter AmpFlow motors. This speed reducer uses a unique three-stage chain-and-sprocket mechanism that reduces cost while still maintaining high torque capacity. This unit provides speed reduction and torque multiplication, and it's an easy way to "bolt-in" the AmpFlow motors. These speed reducers are made with a three-piece aluminum case that has been precision CNC machined. A total of six...

AmpFlow F30-150 Motor with Speed Reducer
Retail: $430.00
Price: $429.00
View
review-star review-star review-star review-star review-star
(1)
Availability: Available
Item #: F30-150-G -

The AmpFlow speed reducer is a heavy-duty, low-cost, gearhead that works with any of the three-inch diameter AmpFlow motors. This speed reducer uses a unique three-stage chain-and-sprocket mechanism that reduces cost while still maintaining high torque capacity. This unit provides speed reduction and torque multiplication, and it's an easy way to "bolt-in" the AmpFlow motors. These speed reducers are made with a three-piece aluminum case that has been precision CNC machined. A total of six...

AmpFlow A28-400 Motor with Speed Reducer
Retail: $640.00
Price: $639.00
View
Availability: Available
Item #: A28-400-G -

The AmpFlow speed reducer is a heavy-duty, low-cost, gearhead that works with any of the three-inch diameter AmpFlow motors. This speed reducer uses a unique three-stage chain-and-sprocket mechanism that reduces cost while still maintaining high torque capacity. This unit provides speed reduction and torque multiplication, and it's an easy way to "bolt-in" the AmpFlow motors. These speed reducers are made with a three-piece aluminum case that has been precision CNC machined. A total of six...

AmpFlow A28-150 Motor with Speed Reducer
Retail: $535.00
Price: $534.00
View
Availability: Available
Item #: A28-150-G -

The AmpFlow speed reducer is a heavy-duty, low-cost, gearhead that works with any of the three-inch diameter AmpFlow motors. This speed reducer uses a unique three-stage chain-and-sprocket mechanism that reduces cost while still maintaining high torque capacity. This unit provides speed reduction and torque multiplication, and it's an easy way to "bolt-in" the AmpFlow motors. These speed reducers are made with a three-piece aluminum case that has been precision CNC machined. A total of six...

AmpFlow 12V 8.5A Power Supply
Price: $29.00
View
Availability: Available
Item #: S-100-12 -

AmpFlow motors and controllers can be used in industrial machinery or other stationary applications with our high-current power supplies. Connect these units to 110 or 220 Volts AC household power and they will supply 5, 12, 24, 36, or 48 volts DC for use with AmpFlow motors. Every power supply goes through a full-load burn-in test so no defective unit leaves the factory. The built-in fan turns on automatically when the unit gets warm and the power supply shuts down temporarily if the...

AmpFlow 24V 4.5A Power Supply
Price: $29.00
View
Availability: Available
Item #: S-100-24 -

AmpFlow motors and controllers can be used in industrial machinery or other stationary applications with our high-current power supplies. Connect these units to 110 or 220 Volts AC household power and they will supply 5, 12, 24, 36, or 48 volts DC for use with AmpFlow motors. Every power supply goes through a full-load burn-in test so no defective unit leaves the factory. The built-in fan turns on automatically when the unit gets warm and the power supply shuts down temporarily if the...

AmpFlow 12V 33A Power Supply
Price: $69.00
View
Availability: Available
Item #: S-400-12 -

AmpFlow motors and controllers can be used in industrial machinery or other stationary applications with our high-current power supplies. Connect these units to 110 or 220 Volts AC household power and they will supply 5, 12, 24, 36, or 48 volts DC for use with AmpFlow motors. Every power supply goes through a full-load burn-in test so no defective unit leaves the factory. The built-in fan turns on automatically when the unit gets warm and the power supply shuts down temporarily if the...

AmpFlow 24V 17A Power Supply
Price: $69.00
View
Availability: Available
Item #: S-400-24 -

AmpFlow motors and controllers can be used in industrial machinery or other stationary applications with our high-current power supplies. Connect these units to 110 or 220 Volts AC household power and they will supply 5, 12, 24, 36, or 48 volts DC for use with AmpFlow motors. Every power supply goes through a full-load burn-in test so no defective unit leaves the factory. The built-in fan turns on automatically when the unit gets warm and the power supply shuts down temporarily if the...

AmpFlow 24V 42A Power Supply
Price: $299.00
View
Availability: Available
Item #: SCN-1000-24 -

AmpFlow motors and controllers can be used in industrial machinery or other stationary applications with our high-current power supplies. Connect these units to 110 or 220 Volts AC household power and they will supply 5, 12, 24, 36, or 48 volts DC for use with AmpFlow motors. Every power supply goes through a full-load burn-in test so no defective unit leaves the factory. The built-in fan turns on automatically when the unit gets warm and the power supply shuts down temporarily if the...

4 Inch AmpFlow Drive Wheel
Price: $29.00
View
Availability: Available
Item #: 4W -

These wheels have a 3/4-inch aluminum hub with a 1/4-inch keyway. They come with two steel discs for holding the wheel in place on the end of a 3/4-inch shaft. This makes it easy to mount these wheels directly on the output shaft of the AmpFlow gearmotor. A 1/4-inch key is also included with the 10-inch wheels. Order these wheels individually or combine them with the AmpFlow gearmotors. Wheel Diameter Tire Width Speed (MPH)* Weight (lbs.) 4 in. 1.5 in. 8.0 0.8 *Indicates the speed at which a...

5 Inch AmpFlow Drive Wheel
Price: $30.00
View
Availability: Available
Item #: 5W -

These wheels have a 3/4-inch aluminum hub with a 1/4-inch keyway. They come with two steel discs for holding the wheel in place on the end of a 3/4-inch shaft. This makes it easy to mount these wheels directly on the output shaft of the AmpFlow gearmotor. A 1/4-inch key is also included with the 10-inch wheels. Order these wheels individually or combine them with the AmpFlow gearmotors. Wheel Diameter Tire Width Speed (MPH)* Weight (lbs.) 5 in. 1.5 in. 10.0 1.0 *Indicates the speed at which a...

6 Inch AmpFlow Drive Wheel
Price: $32.00
View
Availability: Available
Item #: 6W -

These wheels have a 3/4-inch aluminum hub with a 1/4-inch keyway. They come with two steel discs for holding the wheel in place on the end of a 3/4-inch shaft. This makes it easy to mount these wheels directly on the output shaft of the AmpFlow gearmotor. A 1/4-inch key is also included with the 10-inch wheels. Order these wheels individually or combine them with the AmpFlow gearmotors. Wheel Diameter Tire Width Speed (MPH)* Weight (lbs.) 6 in. 1.5 in. 12.0 1.2 *Indicates the speed at which a...

8 Inch AmpFlow Drive Wheel
Price: $42.00
View
Availability: Available
Item #: 8W -

These wheels have a 3/4-inch aluminum hub with a 1/4-inch keyway. They come with two steel discs for holding the wheel in place on the end of a 3/4-inch shaft. This makes it easy to mount these wheels directly on the output shaft of the AmpFlow gearmotor. A 1/4-inch key is also included with the 10-inch wheels. Order these wheels individually or combine them with the AmpFlow gearmotors. Wheel Diameter Tire Width Speed (MPH)* Weight (lbs.) 8 in. 1.5 in. 15.9 1.9 *Indicates the speed at which a...

10 Inch AmpFlow Drive Wheel
Price: $49.00
View
Availability: Available
Item #: 10W -

These wheels have a 3/4-inch aluminum hub with a 1/4-inch keyway. They come with two steel discs for holding the wheel in place on the end of a 3/4-inch shaft. This makes it easy to mount these wheels directly on the output shaft of the AmpFlow gearmotor. A 1/4-inch key is also included with the 10-inch wheels. Order these wheels individually or combine them with the AmpFlow gearmotors. Wheel Diameter Tire Width Speed (MPH)* Weight (lbs.) 10 in. 1.5 in. 19.9 2.4 *Indicates the speed at which a...

12.5 Inch Ampflow Drive Wheel
Price: $66.00
View
Availability: Available
Item #: 12W-WHEEL -

These wheels have a 3/4-inch aluminum hub with a 1/4-inch keyway. They come with two steel discs for holding the wheel in place on the end of a 3/4-inch shaft. This makes it easy to mount these wheels directly on the output shaft of the AmpFlow gearmotor. A 1/4-inch key is also included with the 10-inch wheels. Order these wheels individually or combine them with the AmpFlow gearmotors. 12.5 in. 2.75 in. 24.9 3.4 *Indicates the speed at which a vehicle would travel if the wheel was driven at...