The AmpFlow F30-400 is a mid-range 3-inch motor using ferrite magnets - a cost-effective alternative to the neodymium A28 line that still delivers strong, dependable performance for factory automation, drive systems, and general-purpose motion control.
Built-in capacitors on each brush cut down on electrical noise.
| Specs |
| Diameter | 3.1 in |
| Length | 6.7 in |
| Peak Horsepower | 2.5 |
| Stall Torque | 2240 oz-in |
| Efficiency | 84% |
| Nominal Voltage | 24V |
| No-Load RPM | 4500 |
| Shaft Diameter | 1/2 in |
| Shaft Length | 2.0 in |
| Keyway | 1/8 in |
| Capacitors | Yes |
| Magnet Type | Ferrite |
| No Load Amps | 2.1 Amps |
| Terminal Resistance | 0.076 Ohms |
| Kt | 7.17 oz-in/Amp |
| Kv | 189 RPM/Volt |
| Weight | 8.3 lbs |
Peak Efficiency Point
| Efficiency |
| Peak Efficiency | 84% |
| RPM at Peak Efficiency | 4200 |
| Torque at Peak Efficiency | 170 oz-in |
| Horsepower at Peak Efficiency | 0.71 HP |
| Current at Peak Efficiency | 26 Amps |