Products 1-6 of 6
Availability: In Stock
Item #: 152482-00 -
These 'foam seals' are small, stryofoam O-rings made to fit between the DeWalt motors and their gearboxes. They form a seal against dust particles and other bad things you don't want in your gearbox. Think of it as a $1.29 insurance plan. BP152482-00
Item #: 380264-09 -
This is DeWalt's factory gearbox from the 14vdc cordless power or hammer drill. Exclusively made by DeWalt for their 14v cordless drills.This is a speedy gearbox for a great motor. These 2-speed, planetary gearboxes with all metal gears represent the best value in high technology, power and price. It is simply the best 14v drill motor gearing solution you're going to find for the price, and has a thoroughly proven track record.The specific numerical values below reflect those discovered by bot...
Item #: 393111-04 -
This is DeWalt's OLD VERSION of its 14.4vdc replacement motor for its cordless powerdrills of the same voltage. This little thing is a powerhouse that would be perfect for that 12 thru 60-pounder you've been dreaming of.Just in case you saw the pictures and were curious, this motor may actually be the same one as the old 12v version. -They weight the same, look the same, are priced the same, and I wouldn't be suprised if their voltage range was the same as well.If you plan to couple this motor...
Item #: 639521-00SV -
Approximately 1hp max output @ 36VDC15600 RPM @ 36VVoltage Constant = 520 rpm/V (forward)(475 rpm/V (reverse))Torque Constant = 2.6 oz-in/ampStall current: 300 ampsLength: 3.125 inchesDiameter: 2.0 inchesPinion gear: 14 tooth, 13mm diameterWeight: 1.78 lbShaft: 5 mm, with non-standard-pitch 14 tooth pinionSize: 50 mm diameter, ~84 mm long without shaftMounting: 4x M4 on 33 mm bolt circleBP639521-00
Availability: In Stock
Item #: 396505-22SV -
This is DeWalt's NEW VERSION of its 18vdc replacement motor for its cordless powerdrills of the same voltage.This is the upgraded version of the motor that made SO many bots famous. Easily overvoltable to 24 volts, these motors represent the best value in motor power for its price. It is simply the best motor you're going to find for the price, and it has a very throughoughly proven track record. Unfortunately, DeWalt doesn't publish nor allow us to see their actual numbers on amperage draw,...
Item #: 390087-00SV -
So you've got the DeWalt gearboxes , but you've been pulling your hair out trying to get a shaft to work for them. You COULD upgrade the 24V transmission with the Dustin 2 kit, but if you're on a budget and like to try to work out your own unique solution, we offer these shaft spindle assemblies, made by DeWalt specifically for the 24V Hammerdrills. A version for the 18V gearboxes is available as well. This unique shaft spindle has the X-shaped spline on one end that fits directly into the...