Car Parts

This is the Integy Rear Suspension Kit for the Traxxas 1/10 scale Telluride 4x4FEATURESBillet machined aluminum construction, blue in colorNylon inserts in pivot pointsReplaces stock plastic suspension arms and uprightsINCLUDESTwo Rear Suspension ArmsTwo Rear UprightsTwo Steel PinsFour Screws and two WashersREQUIREMENTSFour 5x11mm Ball Bearings, order DTXC15470-C25809BLUE

0-JCI3313Y

0-LOSB1291

This is a Steering and Servo Saver Hardware Set from Losi.This is a Stock part for:Losi 1/10 XXX-S Sport RTR - LOSA0280Losi 1/10 XXX-S Sport RTR II - LOSA0285Losi 1/10 XXX-S Brushless RTR - LOSA0287Losi 1/10 Drift-R Sedan RTR - LOSB0289INCLUDESOne (1) Steering and Servo Saver Hardware Set0-LOSA1542

0-CIS14109

0-CIS14104

Compatible with Wltoys 1/18 RC Car A949 A959 A969 A979 K929 TOZO C1022 Vortex Powersport Roadster0-CIS58037

0-MIP12102

0-MIP12112

0-INTC22881S

This is the JConcepts Illuzion 1/10 scale Truck Spoiler.FEATURESClear polycarbonate constructionMounts at rear of truck to control lift at high speedWorks with all brands of 1/10 scale nitro or electric trucksINCLUDESOne JConcepts Illuzion 1/10 scale Truck SpoilerREQUIREMENTSPaint of modeler's choice, scissors - DTXR1150 and Reamer - DTXR1155SPECIFICATIONSLength: 2.4" (60mm)Width: 4.2" (106mm)0-JCI0111

Set of Stock Replacement Inside Hinge Pin Arms for the Ofna Ultra. These are located on the inside of the suspension arms.INCLUDED: Two 74mm (2.91) hinge pins, Black Steel, Two 47mm (1.86") hinge pinsUse the original 4mm e-clips to retain the pins.0-OFNA30151

0-ECX3003

0-HTCTU0223

0-JCO304901

0-ASC89081

0-RCET04041

0-RCET02157

BLITZ REAR BEARING CARRIERS0-RPM80792

Rear Suspension Bulkhead, fits Team C: TC02, TC02T, TS2, & Racers Edge PRO2-SC0-RCET02018

0-LOSB2224

REAR HINGE PIN OUTER (2)- PRO2 - SC0-RCET02057

0-IMX18469

This is the Rear Hub Carrier Set for use on the HPI Racing Blitz RTRFEATURESNylon constructionBlack in colorINCLUDESOne each left and right Rear Hub CarriersREQUIREMENTSInstallation on the vehicle0-HPI103329

REAR HUB CARRIERS FITS MODEL: HTCTC04, HTCTR04, HTCT40-HTCTR4011

This is a Rear Inner Hingepin Set, intended for use with the Team Losi Racing 22 1/10 buggy.0-TLR2055

0-VRX10113

0-IMX18465

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58126

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58149

This is a Rear Outer Hingepin Set, intended for use with the Team Losi Racing 22 1/10 buggy.0-TLR2054

This is a 3.5mm Ti-Nitride Rear Shock Shaft Set, intended for use with the Team Losi Racing 22 1/10 buggy.0-TLR5088

0-IMX18454

0-CIS58124

0-TLR2049

0-LOSA2103

Losi Rear Suspension Arms, Aluminum: HRL0-LOSB2020

This is a set of rear suspension holders for the IMEX Samurai SCT.0-IMX18619

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58131

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58156

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58152

0-TEKTT2282

0-TEKTT2283

These are the optional RPM Black Plastic Rear A-Armsfor the Associated RC10GT.FEATURESBlack in ColorPlastic Constrution2 holes for mounting shocksINCLUDES(2) Rear A-Arms(2) 3x5.6mm phillips round head screwsREQUIREMENTSInstallation onto the Team Associated RC10GTSPECIFICATIONSLength: 3.895" (99mm)Width: 1.475" (37.5mm)Thickness: 0.31" (7.9mm)0-RPM70752

16.54 x 21.7 mm 7.05mm diameter 1.01mm shaft diameter3mm shaft length Voltage RPM Current (free) Current (stall) 1.5V 9700 17.5mA 120mA 3.0V 18420 22mA 260mA 5.0V 31900 32.1mA 420mA 0-RPM2 ...

0-TR4012

SERVO SAVER FITS MODEL: HTCTC04, HTCTR04, HTCT4,0-HTCTR4012

0-LOSB2908

ANODIZED SHOCK COLOR PARTS SET0-HPI103407

0-CIS15868

SLIPPER SPRING- PRO2-SC0-RCET02040

0-VTR214002

0-ECX0848

0-IMX18466

0-CIS58117

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58154

0-TR4013

0-IMX18467

0-VRX10410

0-VRX10411