GWS

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

The GWS PC03 In-Flight Gyro Switch allows your gyro to be turned on or off with your transmitter. This item also works as a bypass or RC switch for any R/C item. Simply activate it to apply or remove signal for just about anything hooked to a receiver (Speed controller, servo, etc) Dimensions: 27 x 12.5 x 7 mmPower Input: 4.8V - 6.0VCurrent Draw: 2.5 - 7.0 mAWeight: 6 grams 0-GWPC03J

Metal conversion kit for changing spring mechanism to ratchet in the GWT-4A and GWT-6A radio systems.0-PNSPR-1002

Diameter: 15mmMounting Hole Diameter: 1.3mmWeight per Wheel: 0.5g0-GW-SCW-159-13

Diameter: 26mmMounting Hole Diameter: 1.5mmWeight per Wheel: 2.9g0-GW-SCW-254-13

Replacement duct for original style EDF-64/300H fan units0-GW/EDF64-300H-1

SpecsFrequency band: 2.4GHZISM Band: 2.4GHZ-2.483GHZModulation: DSSS System (Dynamic Sequence Spread Spectrum)Receiver sensitivity: -97dBmRx power: 4.8V-6VWeight: 3g (0.10oz)Range: 100m or 330feet (Ground range) , 200m or 660feet (Ground to airplanes in the air) 0-GWRX4SB

Built in Battery Eliminator Circuit (5V-2A) For use with 2-4 Cell LiPo battery or 5-12 cell NiMH or NiCd Specs Continuous Current 25A Burst Voltage 30A Voltage Range 6-18V BEC 5V - 2A Size 40 x 24 x 10 mm Weight 18g (.64oz) 0-GWESC25A Manual ...

The GWS Transmitter quick charger has both a round transmitter plug and a 3-pin receiver battery plug.Each circuit has an LED to indicate if current is flowing into the battery.Transmitter output: 9.6Vdc @ 60mAReceiver output: 4.8Vdc @ 60mA 0-GWCGR-Q

GWS Transmitter Crystal Holder0-GWCH

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...

These crystalsare compatible with 75Mhz GWS radios and receivers. The receiver crystals are the mini-style UM-1 to be used in all of our GWS antweight receivers. If you need both, you need to order the TX and RX separately, we do not offer a 'set' of the two. If you select "no channel preference" and your order is for a TX and RX crystal, we will provide you with a MATCHING set of whatever we have available in stock. Although we strive to have all these channels in stock, some may be special...