Products 25-48 of 172
Show
VEX Robotics Rack Gearbox Bracket, 2-pack
Price: $9.99
View
(1)
Availability: Temporarily Unavailable
Item #: 275-1188 -

This Bracket is designed with the VEX Rack Gear in mind. An application of this bracket and the rack and pinion gear uses the pinion gear to rotate the rack gear which will in turn slide linearly using the VEX Linear Slide Pack. This allows users to create linear motion. Use additional standard VEX Motion Products (not included) to utilize this bracket with the VEX Rack Gear. Kit includes two gear brackets. No gears are included. Specs Kit Contents 2 Rack Gearbox Brackets Material Type Cold...

VEX Robotics 4in. All Purpose Wheel, 4-pack
Price: $19.99
View
Availability: Temporarily Unavailable
Item #: 276-1497 -

A set of four All-Purpose Wheels, as seen in the VEX Robotics Design Starter Kit.4" all-purpose wheels. Compatible with all VEX Square Shafts 0.125" (3.2mm).VEX-276-1497

VEX Robotics 5in. Knobby Wheel, 4-pack
Price: $19.99
View
Availability: Temporarily Unavailable
Item #: 276-1498 -

A set of four Knobby Wheels, as seen in the VEX Robotics Design Starter Kit.5" knobby wheels. Compatible with all VEX Square Shafts 0.125" (3.2mm).VEX-276-1498

VEX Robotics 4in. High Traction Tire, 4-pack
Price: $12.99
View
Availability: Temporarily Unavailable
Item #: 276-1489 -

The VEX 4" High Traction Tires are replacements for the "all-purpose" treads found on VEX 4" diameter wheels. These tires are designed to provide high traction on smooth surfaces. *Note: This kit includes tires only, wheel rims not included. Simply remove the current 4" tires from their plastic rims and replace them with these high traction ones. Specs Kit Contents (4) 4in. High Traction Tires *Note: Wheel rims not included. Size 4in. diameter Compatibility For use with 4in. VEX wheels...

VEX Robotics Pillow Block Bearing and Lock Bar Pack
Price: $7.99
View
(1)
Availability: Temporarily Unavailable
Item #: 276-2016 -

Another type of bearing used in the VEX Motion Subsystem is a Bearing Block; these are similar to the "pillow- blocks" used in industry. The Bearing Block mounts on a piece of structure and supports a shaft which is offset either above, below, or to the side of the structure. Another option to drive structural pieces using the Motion Subsystem is through a Lock Bar. These pieces are designed such that they can bolt onto any VEX structural component using the standard VEX 1/2in....

VEX Robotics Delrin Bearing Flat, 10-pack
Price: $4.99
View
Availability: Temporarily Unavailable
Item #: 276-1209 -

The Bearing Flat mounts directly on a piece of VEX structure and supports a shaft which runs perpendicular and directly through the structure. Low friction allows shafts to turn smoothly Mount with Screws & Nuts or Pop-Rivets Technical Info Kit Contents 10 Bearing Flats Material Type Delrin Compatibility VEX Shafts (Square bars) 0.125in. (3.175mm) VEX-276-1209 ...

VEX Robotics Shaft Collar, 16-pack
Price: $9.99
View
Availability: Temporarily Unavailable
Item #: 276-2010 -

Collars lock to drive shafts, keeping wheels and gears from sliding along the shaft. Collars fit around Drive Shafts and can be fastened in place using a setscrew. The setscrews used in VEX Shaft Collars are 8-32 size threaded screws; this is the same thread size used in the rest of the kit. There are many applications where it might be beneficial to remove the setscrew from the Shaft Collar and use a normal VEX screw. If a setscrew is lost any other VEX 8-32 screw can be substituted although...

VEX Robotics Steel Washers, 200-pack
Price: $4.95
View
Availability: In Stock
Item #: 275-1024 -

A washer is a thin disk with a hole used to distribute the load of a threaded fastener. VEX washers fit on all VEX screws and VEX shafts.Steel washers are a good all-purpose washer.Compatibility: Washers fit all VEX screws and shafts.Material Finish: Steel washers have a Zinc finish.Size: 0.172" ID, 0.375" OD, 0.032" thickVEX-275-1024 STEP file ...

VEX Robotics Teflon Washers, 25-pack
Price: $4.95
View
Availability: Temporarily Unavailable
Item #: 275-1025 -

A washer is a thin disk with a hole used to distribute the load of a threaded fastener. VEX washers fit on all VEX screws and VEX shafts.Telfon has low friction. Use on shafts where metal rubs on metal.Compatibility: Washers fit all VEX screws and shafts.Material Finish: Plastic washers have no finish.Size: 0.173" ID, 0.375" OD, 0.04" thickVEX-275-1025 STEP file ...

VEX Robotics Pneumatics Kit 1 - Single Acting Cylinders
Price: $219.99
View
Availability: Temporarily Unavailable
Item #: 275-0274 -

Kit 1 is a complete pneumatics add-on for the VEX Robotics system. The cylinders are Single Acting, meaning they use air pressure to extend the piston, and an internal spring to allow the piston to retract. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Single Acting cylinder kit (air push, spring return) Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum...

VEX Robotics Pneumatics Kit 1A - Single Acting Cylinder Add-on
Price: $72.99
View
Availability: Temporarily Unavailable
Item #: 275-0275 -

Kit 1A adds one Cylinder (Air Push, Spring Return) to Kit 1 or Kit 2. Cannot be used without Kit 1 or Kit 2. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Single Acting cylinder kit (air push, spring return) Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum Force 54 N (12 lb. force) Cylinder Strokes 45 Strokes from 100 psi to 25 psi Valve Control Connects to...

VEX Robotics Pneumatics Kit 2 - Double Acting Cylinders
Price: $281.99
View
Availability: Temporarily Unavailable
Item #: 275-0276 -

Kit 2 is a complete pneumatics add-on for the VEX Robotics system. The cylinders are Double Acting, meaning they use air pressure to extend and retract the piston. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Double Acting Cylinder Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum Force 54 N (12 lb. force) Cylinder Strokes 45 Strokes from 100 psi to 25 psi...

VEX Robotics Pneumatics Kit 2A - Double Acting Cylinder Add-on
Price: $109.99
View
Availability: Temporarily Unavailable
Item #: 275-0277 -

Kit 2A adds one Cylinder (Bi-directional) to Kit 1 or Kit 2. Cannot be used without Kit 1 or Kit 2. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Double Acting Cylinder Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum Force 54 N (12 lb. force) Cylinder Strokes 45 Strokes from 100 psi to 25 psi Valve Control Connects to one VEX Controller I/O Port Tank...

VEX Robotics Pneumatics Tubing - 5ft.
Price: $4.95
View
Availability: In Stock
Item #: 275-0447 -

5ft. of Polyurethane Tubing for use with VEX Robotics Pneumatics.Black, 5/32" ODVEX-275-0447

VEX Robotics Steel Angles 2x2x25, 4-pack
Price: $14.99
View
Availability: In Stock
Item #: 275-1142 -

VEX angle without slots. Typically used for structural framing. Good strength on two axis. Can be cut on 0.500" increments. Technical Specs Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Material Thickness 0.046" (1.17mm) Material Finish Zinc Plated Hole Size 0.182 square (Vex standard) Weight 0.252 lbs VEX-275-1142 STEP file ...

VEX Robotics Steel Plates 25x5, 4-pack
Price: $14.99
View
Availability: In Stock
Item #: 275-1140 -

Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Technical Specs Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Material Thickness 0.046" (1.17mm) Material Finish Zinc Plated Hole Size 0.182 square (Vex standard) Weight 0.327 lbs VEX-275-1140 STEP file ...

VEX Robotics 8-32 Keps Nuts, 100-pack
Price: $3.99
View
Availability: Temporarily Unavailable
Item #: 275-1026 -

A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.Keps Nuts have integral external tooth lock washer.Compatibility: Compatible with all VEX 8-32 screws and couplers.Thread Type: 8-32 UNCSize: Hex size = 11/32" across flats.VEX-275-1026

VEX Robotics 4in. Zip Ties, 100-pack
Price: $4.99
View
Availability: Temporarily Unavailable
Item #: 276-1032 -

Black Zip Ties used to hold together and manage cables, band rubber chords, or attach to rollers or tank tread to assist an intake mechanism. 1/8in wide x 4in long with a rating of 18lbs.VEX-276-1032

VEX Robotics Hinges, 2-pack
Price: $9.99
View
Availability: Temporarily Unavailable
Item #: 275-1272 -

VEX Hinges provide a pivoting joint between two pieces of VEX structural components. These hinges are about 2.5" long and 1.3" wide. Each section of the hinge has a mounting surface about 0.5" wide, and includes (5x) VEX Square holes on the standard VEX 1/2" pitch. The hinges pivot approximately 265-degrees. Sold in packs of 2. Technical Info Metal Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Metal Thickness 0.046" (1.17mm) Finish Zinc Plated Hole Size 0.182...

VEX Robotics Tool Kit
Price: $2.99
View
Availability: Temporarily Unavailable
Item #: 276-1382 -

All the tools you need to build with VEX. The Open End Wrench fits VEX nuts and standoffs. The Allen wrenches fit the screws and shaft collars.Includes(1) Open End Wrench(1) 3/32" Allen Wrench(1) 5/64" Allen WrenchVEX-276-1382

VEX Robotics 8-Bay AA/AAA Smart Battery Charger
Price: $24.99
View
Availability: Temporarily Unavailable
Item #: 276-1622 -

This Smart Battery Charger is capable of charging up to eight Ni-MH or Ni-Cd rechargeable AA or AAA batteries. Smart Charger technology provides automatic trickle charging and temperature cutoff during the charge cycle while LEDs provide user feedback on the status of each charging battery.Included:8-Bay AA/AAA Smart Battery ChargerPower AdapterVEX-276-1622 Inventor's Guide Insert ...

VEX Robotics 2000mAh 7.2V NiMH Robot Battery
Price: $19.99
View
Availability: Temporarily Unavailable
Item #: 276-1456 -

The VEX 7.2V Nickel Metal Hydride Battery provides a rechargeable power source for use with your VEX robots. It has the same capacity of the VEX 7.2V NiCad battery with a smaller footprint.Capacity: 2000 mAhRechargeable Nickel Metal Hydride (NiMH)Standard VEX power connectorWARNING: Make sure your charger is capable of charging NiMH Batteries. If using a VEX Charger, the VEX Smart Charger MUST be used to charge this battery! DO NOT use the discontinued VEX Fast Battery Charger to charge NiMH...

VEX Robotics Power Expander
Price: $49.99
View
Availability: Temporarily Unavailable
Item #: 276-2271 -

Use the VEX Power Expander to add a secondary power source for four of the PWM outputs on the VEX Microcontroller. Balance a robot's motor load across two batteries to extend robot run time and increase performance.FeaturesAttach a 2nd battery to your robotPower up to four (4) Motors or ServosReduce motor load on primary batteryRun your robot for longer!Protected by an Internal Circuit BreakerStatus port provides feedback to MicrocontrollerMonitor when your robot trips its breakerMonitor...

VEX Robotics Performance Tool Kit
Price: $39.99
View
Availability: Temporarily Unavailable
Item #: 276-1645 -

A group of performance tools that make working on your VEX Robot easier. Included wrenches fit VEX screws and shaft collars.Included(5) 5/64" T-Handle Hex Driver(5) 3/32" T-Handle Hex Driver(5) 3/32" Ball-End Hex Screwdriver VEX-276-1645