Products 1-19 of 19
Show
NPC 14:1 Gearset
Price: $136.00
View
Availability: Available
NPC Robotics Item #: NPC-G1410 -

This 14:1 gear set is designed to replace the original 20:1 found in our T64 and T74 motors. What results is the drive shaft RPMs will increase by 50%. Beware, this puts added stress on the gears, and will increase the chance of gear failure. Renders no change in overall motor weight. Gear set includes the cast aluminum bell housing. Comes assembled.NPC-G1410

NPC 2212 Motor
Price: $172.36
View
(4)
Availability: Available
NPC Robotics Item #: 2212 -

This is a great mid-size motor. The 2212 has a dual shaft design so you can run it with two wheels for dual traction, or cut off one side shaft for single wheel drive.12V (can not be run higher)Reversible, Permanent Magnet1/2" shaft diameter5.1 pounds285rpm / 21:1 gear ratioNPC-2212 CAD Drawing

NPC Black Max Motor
Price: $339.00
View
(1)
Availability: Available
NPC Robotics Item #: 4200 -

A beast of a motor, the Black Max is the motor to use when you are done kidding around with the small stuff. This incredible motor packs nearly 4 horsepower under it's hood. It will need a VERY beefy speed controller, or a solenoid-powered switch to be activated because of it's high current draw.24V to 36VReversible, Permanent Magnet, center timed15.5 pounds3400rpm @ 24V (approx 140rpm per volt)draws 200 amps normal use, 470 amps at stall3.8 horsepower5/8" output shaft with 3/16" key slotSteel...

NPC T74 Motor
Price: $351.34
View
(4)
Availability: Available
NPC Robotics Item #: T74 -

A longer, more powerful version of the T64, it is a little faster and a lot more torque. This motor is a great choice for drive systems of 200-300+ pound robots. 1.469" diameter stub shaft with four mounting holes. The same size as the T64, but with 1" longer motor. 24V (can be run at 36)Reversible, Permanent Magnet14.4 pounds245rpm / 20:1 gear ratioNPC-T74 CAD Drawing (NOTE: The T74 is 1in. longer than this drawing shows.) ...

NPC-02446 Motor
Price: $89.72
View
(1)
Availability: Available
NPC Robotics Item #: 02446 -

A very good solution for a lightweight robot's drive system (geared down) or for a medium spinner weapon.24VReversible, Permanent Magnet, center timed4.8 pounds4000rpmapprox .70 horsepowerdraws 25 amps normal use, 81.4amps at stall2.964" diameter5.5" length5/16" x 1 1/2" shaft with flatNPC-02446 SolidWorks File

NPC-1200 Motor
Price: $244.50
View
Availability: Available
NPC Robotics Item #: 1200 -

A much more powerful motor, this beast would be great for a very powerful drivetrain, or as a great spinner weapon motor.24V-36VReversible, Permanent Magnet, center timed9.6 pounds3500rpmapprox 1.25 horsepowerdraws 39amps normal use, 160amps at stall.5" x 1 3/4" shaft 1/8" key slotNPC-1200 CAD Drawing Dynamometer Results ...

NPC-41250 Motor
Price: $196.17
View
(2)
Availability: Available
NPC Robotics Item #: 41250 -

This versatile 90 degree gearbox allows you to fit motors in places you may otherwise be too constrained on space. This powerful motor is a popular choice for middleweight robots. For 2 wheel drive setups, just flip one motor around so that the wheels line up. 12V (can be run at 24V)Reversible, Permanent Magnet7.5 pounds34:1 gear ratio1/2" shaft diameter93rpm (12V) 174rpm (24V) /48.5:1 gear ratioNPC-41250 CAD Drawing ...

NPC-A0045512 Motor
Price: $9,619.97
View
Availability: Available
NPC Robotics Item #: A0045512 -

This is a 24VDC, extra heavy-duty motor gearbox combination with drive pinion, dovetail mounts attached and grounding strap. Please contact us for additional details regarding this product.0-A0045512

NPC-B81 Left-Side Geared Motor
Price: $451.00
View
Availability: Available
NPC Robotics Item #: NPC-B81 -

Both B81 and B82 motors come standard with an electro-magnetic 24v parking brake, which can easily be removed if that function is not necessary. Built for continuous 24 volt 30 amp duty, they can be run at 36 volts for 5 minutes, adding about 50% more speed and torque. This motor comes in either left or right side shaft drive configurations, and makes a great drivetrain for a large robot. B81 is shown here. 24V-36VReversible, Permanent Magnet18:1 gear ratioOverall length of motor & gearbox =...

NPC-B81HT High Torque Left-Side Geared Motor
Price: $451.00
View
Availability: Available
NPC Robotics Item #: NPC-B81HT -

This is basically the same motor as the standard B81 motor, but has more torque and a slightly different output shaft. These motors come standard with an electro-magnetic 24v parking brake, which can easily be removed if that function is not necessary. Built for continuous 24 volt 30 amp duty, they can be run at 36 volts for 5 minutes, adding about 50% more speed and torque. This motor comes in either left or right side shaft drive configurations, and makes a great drivetrain for a large...

NPC-B82 Right-Side Geared Motor
Price: $451.00
View
(2)
Availability: Available
NPC Robotics Item #: NPC-B82 -

Both B81 and B82 motors come standard with an electro-magnetic 24v parking brake, which can easily be removed if that function is not necessary. Built for continuous 24 volt 30 amp duty, they can be run at 36 volts for 5 minutes, adding about 50% more speed and torque. This motor comes in either left or right side shaft drive configurations, and makes a great drivetrain for a large robot. B81 is shown here. 24V-36VReversible, Permanent Magnet18:1 gear ratio20.4 pounds untrimmed17 pounds...

NPC-B82HT High Torque Right-Side Geared Motor
Price: $451.00
View
Availability: Available
NPC Robotics Item #: NPC-B82HT -

This is basically the same motor as the standard B81 motor, but has more torque and a slightly different output shaft. These motors come standard with an electro-magnetic 24v parking brake, which can easily be removed if that function is not necessary. Built for continuous 24 volt 30 amp duty, they can be run at 36 volts for 5 minutes, adding about 50% more speed and torque. This motor comes in either left or right side shaft drive configurations, and makes a great drivetrain for a large...

NPC-EB249 Motor
Price: $1,313.39
View
Availability: Available
NPC Robotics Item #: EB249 -

This is a 24VDC, right-angled, heavy-duty motor gearbox combination. Please contact us for additional details regarding this product.0-EB249

NPC-IEC9-L Motor
Price: $874.00
View
Availability: Available
NPC Robotics Item #: IEC9-L -

The largest of our right angle motors. It is widely used in both mobility and robotic applications. This unit combines a powerful motor and a 28:1 gearbox with the ability to disengage the gearbox with the flip of a lever. The integrated electromechanical brake makes this a particularly good motor for use in mobility applications.- Convenient radius in the gearbox cover provides for easy mount to wheelchair frame.Specifications:- 17 mm output shaft with 6 mm key slot- Electro-mechanical Brake...

NPC-IEC9-R Motor
Price: $874.00
View
Availability: Available
NPC Robotics Item #: IEC9-R -

The largest of our right angle motors. It is widely used in both mobility and robotic applications. This unit combines a powerful motor and a 28:1 gearbox with the ability to disengage the gearbox with the flip of a lever. The integrated electromechanical brake makes this a particularly good motor for use in mobility applications.- Convenient radius in the gearbox cover provides for easy mount to wheelchair frame.Specifications:- 17 mm output shaft with 6 mm key slot- Electro-mechanical Brake...

NPC-K2446 Motor/Gearbox/Wheel Kit with 4 inch wheel
Price: $180.00
View
Availability: Available
NPC Robotics Item #: K2446-4 -

This is a great solution for a small, low-profile, powerful gearmotor kit. Complete 24v drive assembly kit. Kit includes: one motor, one wheel, aluminum plates, bearings and gear set. Specially designed for 60 to 120 pound robots. The 4:1 20p gears are made from A311 stress-proof steel. The mounting plate & bearing block is 1/2" 6061 aluminum and all holes are pre-drilled, all hardware and bearings is included. The output axle is 1/2" keyed steel. All parts included in one price....

NPC-K2446 Motor/Gearbox/Wheel Kit with 5 inch wheel
Price: $180.00
View
Availability: Available
NPC Robotics Item #: K2446-5 -

This is a great solution for a small, low-profile, powerful gearmotor kit. Complete 24v drive assembly kit. Kit includes: one motor, one wheel, aluminum plates, bearings and gear set. Specially designed for 60 to 120 pound robots. The 4:1 20p gears are made from A311 stress-proof steel. The mounting plate & bearing block is 1/2" 6061 aluminum and all holes are pre-drilled, all hardware and bearings is included. The output axle is 1/2" keyed steel. All parts included in one price....

NPC-K2446 Motor/Gearbox/Wheel Kit with 6 inch wheel
Price: $180.00
View
(2)
Availability: Available
NPC Robotics Item #: K2446-6 -

This is a great solution for a small, low-profile, powerful gearmotor kit. Complete 24v drive assembly kit. Kit includes: one motor, one wheel, aluminum plates, bearings and gear set. Specially designed for 60 to 120 pound robots. The 4:1 20p gears are made from A311 stress-proof steel. The mounting plate & bearing block is 1/2" 6061 aluminum and all holes are pre-drilled, all hardware and bearings is included. The output axle is 1/2" keyed steel. All parts included in one price....

NPC-T64 Motor
Price: $330.93
View
(3)
Availability: Available
NPC Robotics Item #: T64 -

One of the most popular combat robot motors out there! This is the motor that drives Nightmare, T-Minus, Diesector, Mechavore, and many more. The T64 is ready to plug in and go. (motor is formerly known as the 64038) 24V (can be run at 36) Reversible, Permanent Magnet 13 pounds 230rpm / 20:1 gear ratio approx .7hp NPC-T64 CAD Drawing ...