Ungeared Motors

New fan-cooled A28 motors are designed for applications that require longer duty cycles and even higher power outputs. Low profile leads enable more compact installations. The fan-motors have ventilation holes in the front and rear aluminum plates to allow for flow-through cooling. The holes in the front plate are positioned so they are not blocked when mounting the motor to a flat surface. These motors also feature low-profile motor leads for better fit into smaller spaces. Specs Diameter 3.0...

New fan-cooled A28 motors are designed for applications that require longer duty cycles and even higher power outputs. Low profile leads enable more compact installations. The fan-motors have ventilation holes in the front and rear aluminum plates to allow for flow-through cooling. The holes in the front plate are positioned so they are not blocked when mounting the motor to a flat surface. These motors also feature low-profile motor leads for better fit into smaller spaces. Specs Diameter 3.0...

AmpFlow motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of less expensive ferrite magnets. The economy E30 motors are designed to give good performance at the lowest possible price.These motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing, motorized scooters, go karts, and electric bicycles. Specs Diameter 3.1 in. Length...

AmpFlow motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of less expensive ferrite magnets. The economy E30 motors are designed to give good performance at the lowest possible price.These motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing, motorized scooters, go karts, and electric bicycles. Specs Diameter 3.1 in. Length...

AmpFlow high-performance motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of less expensive ferrite magnets.. The mid-range motors, (F30-150 and F30-400), are designed for the highest performance and efficiency while still using the less expensive ferrite magnets. These motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing,...

AmpFlow motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of less expensive ferrite magnets. The mid-range motors, (F30-150 and F30-400), are designed for the highest performance and efficiency while still using the less expensive ferrite magnets. These motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing, motorized scooters,...

These standard motors are designed to give good performance and great value. The big G43-500 motors work great for applications that require sustained power output of up to 500 Watts (0.67 horsepower).These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 500 Diameter 4.3 in. Length 5.3 in. Efficiency 80% No-Load RPM @ 24V 3300 Output Shaft 11-Tooth #25 Sprocket Weight 8.6 lb The above...

These standard motors are designed to give good performance and great value. The smaller M27-150 motors have sustained outputs of 150 Watts (0.20 horsepower). They are available with either a sprocket or pulley.These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 150 Diameter 2.7 in. Length 3.9 in. Efficiency 79% No-Load RPM @ 24V 3800 Output Shaft 11-Tooth #25 Sprocket Weight 3.0 lb The above...

These standard motors are designed to give good performance and great value. The smaller M27-150 motors have sustained outputs of 150 Watts (0.20 horsepower). They are available with either a sprocket or pulley.These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 150 Diameter 2.7 in. Length 3.9 in. Efficiency 79% No-Load RPM @ 24V 3800 Output Shaft 19-Tooth, 3mm Pitch Pulley Weight 3.0 lb The...

These pancake motors are designed to give good performance and great value in tight spaces. The smaller P40-250 motors have sustained outputs of 250 Watts (0.34 horsepower). These are available with either a sprocket or pulley.These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 250 Diameter 4.0 in. Length 3.2 in. Efficiency 78% No-Load RPM @ 24V 3400 Output Shaft 11-Tooth #25 Sprocket Weight 4.2...

These pancake motors are designed to give good performance and great value in tight spaces. The smaller P40-250 motors have sustained outputs of 250 Watts (0.34 horsepower). These are available with either a sprocket or pulley.These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 250 Diameter 4.0 in. Length 3.2 in. Efficiency 78% No-Load RPM @ 24V 3400 Output Shaft 13-Tooth, 5mm Pitch Pulley...

These pancake motors are designed to give good performance and great value in tight spaces. The P40-350 motors work great for applications that require sustained power output of up to 350 Watts (0.47 horsepower). These motors are ideal for cost-sensitive applications including robots, motorized scooters, go karts, and electric bicycles. Specs Watts - Continuous 350 Diameter 4.0 in. Length 4.3 in. Efficiency 79% No-Load RPM @ 24V 3500 Output Shaft 11-Tooth #25 Sprocket Weight 5.6 lb The above...

Main Motor with Pinion: 120SR

This is a pair of Counter Clockwise Rotating R/F L/R Motorsfor the Dromida XL 370 UAV Drone.FEATURESMounts to right front and left rear boomPreinstalled pinion gearsBrushed typeFor gear driven props the motor is marked CW to spin the prop CCWINCLUDESTwo Counter Clockwise Rotating Motors with Wire Leads, Connectorsand Pinion Gears

This is a pair of Clockwise Rotating L/F R/R Motorsfor the Dromida XL 370 UAV Drone.FEATURESMounts to left front and right rear boomPreinstalled pinion gearsBrushed typeFor gear driven props the motor is marked CCW to spin the prop CWINCLUDESTwo Clockwise Rotating Motors with Wire Leads, Connectors and PinionGears

This is the Counter Clockwise Rotating Motorfor the Verso Quadcopter from Dromida.FEATURESInstalls in right front and left rear motor podsINCLUDESCounter Clockwise Rotating Motor with Pretinned Wire Leads

This is a great little workhorse motor. A popular size for RC enthusiasts, we can now make this motor available to everyone at a great price. High performance in a small, inexpensive motor. Now comes with a 16T, 3mm pitch pulley press fit onto the motor shaft. (We can remove this pulley from the shaft if you prefer, just choose the option from the above pop-up menu). Outer Shaft Diameter: 0.58 in.Inner Hole Diameter: 3mm   Speed : 24,000 rpm @ 12V Angular velocity constant: 2000 rpm/V...

E-flite Direct-Drive N60 Tail Motor

Clockwise Motor w/ Pinion: BMCX2, FHX, MH-35

One counterclockwise-rotating upper rotor motor for the Blade mCX2, FHX, and MH-35

Motor with Pinion, Left: BMCX

Motor with Pinion, Right: BMCX

SPEED PLUS, the new generation of electricmotors with integral speed controller, combiningreliability with maximum convenience.Integral motor suppression: 3 suppressorcapacitorsPowerful BEC system for 3 servosNo separate controller to mount in the modelaircraftNo extra cables between speed controller andmotor: increases efficiency, saves space andweightEMF brake for reliable propeller folding; switches off automatically after 5 seconds with rigid propellers RC system switched on by connecting...

Specifications:Voltage (nominal): 7.2VNo Load Current: 0.28mANo Load Speed: 25500 RPMStall Torque: 1.8oz-in (130 g-cm)Stall Current: 7.2AShaft: 1.5mm x 4.6mm longDiameter: 0.47" (12.0 mm)Length: 1.18" (30.0 mm)Weight: 0.7oz.

Specifications:Voltage (nominal): 6.0VNo Load Current: 1.4mANo Load Speed: 30500 RPMStall Torque: 8.3 oz-in (600 g-cm)Stall Current: 36AShaft: 2.0mm x 7.3mm longDiameter: 0.96" (24.4mm)Length: 1.2" (30.8mm)Weight: 1.76oz

This is a nice compact yet powerful motor for science projects, robotics, hobbyist projects, and any all-around place you need a 1.5 - 6VDC motor.Operating Voltage: 1.5-6V DCWeight: 42g (1.48 oz)No Load speed: 9200rpm @ 3.0V, 18000rpm @ 6.0V0.16 amps no loadapprox 2amps @ stallDiameter: 24.2mmLength: 30.5mm (not counting shaft)Shaft: 2.0mm diameter, 12mm longFace-mount holes are 2.3mm, and are spaced 14.0mm apartPlease click on the Mabuchi project sheet on this page for complete data on this...

This is the Clockwise Rotating Motor for the Verso Quadcopter from Dromida.FEATURESInstalls in left front and right rear motor podsINCLUDESClockwise Rotating Motor with Pretinned Wire Leads

The Electric Motorsport PMAC-G4845 kit will convert your gas or diesel engine to clean, silent electric propulsion! This kit is designed for inboard or outboard electric marine drive system conversions (specifically sailboats or light boats), but is also suitable for many other applications. Electric drive systems of this power usually cost $7,000 and up, but this *pre-assembled kit makes it affordable at less than half of the cost. Features- Variable Throttle for smooth speed control-...

The Mars Brushless PMAC kit will convert your gas or diesel engine to clean, silent electric propulsion! This kit is designed for inboard or outboard electric marine drive system conversions (specifically sailboats or light boats), but is also suitable for many other applications. Electric drive systems of this power usually cost $4,000 and up, but this pre-assembled kit makes it affordable at about a third of the cost.Although this kit is pre-assembled, there are certain tasks that you will...

The Electric Motorsport PMAC-G8435 kit will convert your gas or diesel engine to clean, silent electric propulsion! This kit is designed for inboard or outboard electric marine drive system conversions (specifically sailboats or light boats), but is also suitable for many other applications. Features- Variable Throttle for smooth speed control- Brushless Motor design makes brush maintenance a thing of the past.- Easy forward and reverse switching with a flip of a switch- Motor and Controller...

SpecsWeight: 7 oz.Motor Shaft Size: 3.2 mm ( just under 1/8”)Use a 25 amp fuseFor a Speed Controler - also called an “ESC”, use one rated min. 20 amps#16 wire for connectionsNote: capacitors are built in this motor.Battery: uses 7.2 volts - 6 cells FeaturesMade with Ferrite Magnets.Built-in capacitorsRuns with 6-7 cellsFor both direct drive and geared systems

This motor can replace the motor included with the Tamiya Mini Motor 4-speed, 8-speed, and 12-speed gearboxes and has 20% more power than the motor included with those gearboxes.The Tamiya 75026 Mini Motor set includes:One motorOne 8 toothed 0.5M pinion gearVinyl tubbingDouble sided tapeSpecsFree-run speed at 3V: 10500 rpmFree-run current at 3V: 100 mAStall current at 3V: 1.1 AStall torque at 3V: 0.3 oz-inSize: 19 x 16 x 12 mmWeight: 0.39 oz ...

The ME1003 is a brush-type, permanent magnet DC motor with very high efficiency. Capable of 11.5 KW continuous and 23 KW for 1 minute. For voltages from 12 to 72 VDC input and 200 amps continuous (400 amps for 1 minute). Designed for battery operated equipment. For more information, see the Performance Information section. Motor weight of 39 pounds. This motor has similar performance to the Lynch, Lemco, and AGNI motorsSpecificationsPower: 11.5 kW cont-- 23 kW pkVoltage: 12-72 Volt ratedSpeed:...

A beast of a motor, the Black Max is the motor to use when you are done kidding around with the small stuff. This incredible motor packs nearly 4 horsepower under it's hood. It will need a VERY beefy speed controller, or a solenoid-powered switch to be activated because of it's high current draw.24V to 36VReversible, Permanent Magnet, center timed15.5 pounds3400rpm @ 24V (approx 140rpm per volt)draws 200 amps normal use, 470 amps at stall3.8 horsepower5/8" output shaft with 3/16" key slotSteel...

A very good solution for a lightweight robot's drive system (geared down) or for a medium spinner weapon.24VReversible, Permanent Magnet, center timed4.8 pounds4000rpmapprox .70 horsepowerdraws 25 amps normal use, 81.4amps at stall2.964" diameter5.5" length5/16" x 1 1/2" shaft with flat SolidWorks File

A much more powerful motor, this beast would be great for a very powerful drivetrain, or as a great spinner weapon motor.24V-36VReversible, Permanent Magnet, center timed9.6 pounds3500rpmapprox 1.25 horsepowerdraws 39amps normal use, 160amps at stall.5" x 1 3/4" shaft 1/8" key slot CAD Drawing Dynamometer Results ...

This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided motor. Offering 7400 rpm @ 4.7V, drawing 150mA and giving 4 gm*cm torque (17 @ stall), it's very similar to the Mabuchi FF-030 it replaces.

This 130 form-factor high-power motor fits in the GM2/3/8/9 series of gear motors, offering approximately 3 times the speed, twice the torque and quadruple the power-draw! Retrofitting the gear motor is easy - just remove the motor retainer strap, transfer the pinion gear, and reinstall - that's it!SpecsPerformance at No LoadSpeed: 2500 RPMCurrent: 0.065AAt StallTorque: 13.8 g-cmCurrent: 0.22AAt Maximum Efficiency Efficiency: 22.5%Speed: 1620 RPMTorque: 4.9 g-cmCurrent: 0.12AOutput: 0.081...

This powerful little motor is a great all-purpose DC motor. This one is a bit faster than the older "Small Johnson" motor. Fully reversible, two 2.5mm mounting holes on the face, which are exactly 25mm apart, so it will fit on many gearboxes designed to fit 550-size motors.   Speed : 24000 rpm @ 12V Angular velocity constant: 2000 rpm/V Amps @ nominal: 1.8 Amps Stall current: 91.8 A Weight: 7.50 oz (213 grams) Diameter: 1.46" (37.0mm) Length: 2.24" (57mm) Shaft...

Specially designed to be used in conjunction with Tamiya solar cells. This is a DC motor that operates efficiently at low voltages making it ideal for solar power applications. The motor output is 380 RPM at 0.5VDC and 1280 at 1.5VDC. The motor comes with a metal mounting bracket and three pinion gears (8, 10 and 12 teeth).Dimensions: 33.5 x 19.5 x 32mm (1.32 x .77 x 1.26")

The BAG Motor is a motor designed specifically for medium-power applications on FRC robots. This motor is constructed similarly to the CIM & Mini CIM, with the sealed-case robustness FRC teams have come to love & trust. FIRST legal. 12V DC. Specs Output Shaft Size 4mm (0.157in.) Free Speed 14000 rpm (+/-10%) Free Current 1.8A Maximum Power 147 W Stall Torque 0.4N-m (3.5 in-lbs) Stall Current 41A Mounting Holes (2) M4 tapped holes on a 25mm bolt circle Size 1.59in. diameter, 2.72in. long Weight...

The CIM motor can be used to power a drivetrain or other mechanism on large competitive robots. FIRST legal. 12V DC. Specs Output Shaft Size 8mm (0.314in.) with 2mm keyway Free Speed 5310 rpm (+/-10%) Free Current 2.7A Maximum Power 337 W (at 2655 rpm, 172 oz-in, and 68A) Stall Torque 2.42N-m (343.4 oz-in.) Stall Current 133A Mounting Holes (4) #10-32 tapped holes on a 2in. bolt circle Size 2.5in. CIM Motor Weight 2.8lbs. Specs and Performance Information ...

The Mini CIM has 2/3 the power of a CIM motor, in a similar form-factor and with the same mounting. Similar output speeds allow Mini CIM motors to be combined in mechanisms with full-size CIM motors using the same gearing. Use this motor interchangeably with CIMs in your designs, then swap them in and out to put your power where you need it most. FIRST legal. 12V DC. Specs Output Shaft Size 8mm (0.314in.) with 2mm keyway Free Speed 6200 rpm (+/-10%) Free Current 1.5A Maximum Power 230 W Stall...