Misc.

Give your rig a scale look with our LED Light Bar. This versatile setup works with 4V to 12V DC input and includes all the mounting hardware need for most 1/10 scale trucks. Perfect for off-road trucks or rock crawlers.Length: 0.8 in. ( 20.6 mm)Width: 4.6 in. (117.5 mm)Height: 1.2 in. (30.2 mm)Weight: 0.05 lbsNumber of LEDs: 5LED Size: 5 mmLED Housing Diameter: 0.9 in. (22.2 mm)LED Lead Length: 15 in. (381 mm)Connector Type: mCP XKit INCLUDES1 x Light Bar2 x Body Mounts1 x 5mm LED Set5 x Spot...

0-RJSC1049

0-HPIC4341

0-HTCT08913

Description:This is a Gmade 32 Pitch 17 Tooth Hardened Steel Pinion Gear, with a 3mm bore.Feature:Fits: Gmade R1 Rock Buggy, Spider, Dragoon, Stealth, G1Material: Hardened steelColor: Black finishMade to fit 3mm shaft motorsInclude:32 pitch 3mm hardened steel pinion gear (1 pc)3x3mm set screw (1 pc)0-GM81417

Hardened steelBlack finishMade to fit 3mm shaft motorsFits Gmade R1 Rock Buggy, Spider, Dragoon, Stealth, G1, Traxxas E-maxx, E-Revo, Tamiya Clodbuster, TXT-1What's included:32 pitch 3mm hardened steel pinion gear 19 tooth x 13x3mm set screw x 1Specs:Length: 11mmInner Diameter: 3mm0-GM81419

32 Pitch 3mm Hardened Steel Pinion Gear 11 Tooth (1)0-GM81411

32 Pitch 3mm Hardened Steel Pinion Gear 12 Tooth (1)0-GM81412

32 Pitch 5mm Hardened Steel Pinion Gear 18 Tooth (1)0-GMA82418

Hardened carbon steelDark gray finishHeat treatmentMade to fit 5mm shaft motorsFits Traxxas E-maxx brushless, E-Revo brushless, SummitWhat's included:32 pitch 5mm hardened steel pinion gear 20 tooth x 14x4mm set screw x 1Specs:Length: 12mmInner Diameter: 5mm0-GM82420

0-MIP12198

0-MIP99044

0-TAMC4393

Fits 1:18 HSP Buggy / Truggy 2.4Ghz 4WD0-CIS58135

Fits 1:18 HSP Monster Truck 2.4Ghz 4WD0-CIS58140

Fits 1:18 HSP Short Course Truck 2.4Ghz 4WD0-58145

0-58159

This is the 19 Tooth M5 Pinion Gear from Tekno RC.FEATURESIdeal for 1/8 scale and other MOD1 pinion applicationsConstructed of CNC machined steel, lightened and hardened fordurabilityNumber of teeth laser etched on shaftINCLUDES19 Tooth Pinion Gear, M5 Set ScrewREQUIREMENTSInstalling on motor shaft and securing with set screwSPECIFICATIONSNumber of Teeth: 19Gear Pitch: MOD1Hole Diameter (Bore): 5mm0-TKR4179 ...

0-TKR4186

This is the 18 Tooth M5 Pinion Gear from Tekno RC.FEATURESIdeal for 1/8 scale and other MOD1 pinion applicationsConstructed of CNC machined steel, lightened and hardened fordurabilityNumber of teeth laser etched on shaftINCLUDES18 Tooth Pinion Gear, M5 Set ScrewREQUIREMENTSInstalling on motor shaft and securing with set screwSPECIFICATIONSNumber of Teeth: 18Gear Pitch: MOD1Hole Diameter (Bore): 5mm0-TKR4178 ...

This is the 21 Tooth M5 Pinion Gear from Tekno RC.FEATURESIdeal for 1/8 scale and other MOD1 pinion applicationsConstructed of CNC machined steel, lightened and hardened fordurabilityStandard length shankNumber of teeth laser etched on shaftINCLUDES21 Tooth Pinion Gear, M5 Set ScrewREQUIREMENTSInstalling on motor shaft and securing with set screwSPECIFICATIONSNumber of Teeth: 21Gear Pitch: MOD1Hole Diameter (Bore): 5mm0-TKR4181 ...

This is the 24 Tooth M5 Pinion Gear from Tekno RC.FEATURESIdeal for 1/8 scale and other MOD1 pinion applicationsConstructed of CNC machined steel, lightened and hardened fordurabilityStandard length shankNumber of teeth laser etched on shaftINCLUDES24 Tooth Pinion Gear, M5 Set ScrewREQUIREMENTSInstalling on motor shaft and securing with set screwSPECIFICATIONSNumber of Teeth: 24Gear Pitch: MOD1Hole Diameter (Bore): 5mm0-TKR4184 ...

This is the 28 Tooth M5 Pinion Gear from Tekno RC.FEATURESIdeal for 1/8 scale and other MOD1 pinion applicationsConstructed of CNC machined steel, lightened and hardened fordurabilityStandard length shankNumber of teeth laser etched on shaftINCLUDES28 Tooth Pinion Gear, M5 Set ScrewREQUIREMENTSInstalling on motor shaft and securing with set screwSPECIFICATIONSNumber of Teeth: 28Gear Pitch: MOD1Hole Diameter (Bore): 5mm0-TKR4188 ...

This is the 23 Tooth M5 Pinion Gear from Tekno RC.FEATURESIdeal for 1/8 scale and other MOD1 pinion applicationsConstructed of CNC machined steel, lightened and hardened fordurabilityStandard length shankNumber of teeth laser etched on shaftINCLUDES23 Tooth Pinion Gear, M5 Set ScrewREQUIREMENTSInstalling on motor shaft and securing with set screwSPECIFICATIONSNumber of Teeth: 23Gear Pitch: MOD1Hole Diameter (Bore): 5mm0-TKR4183 ...

0-HBSC7178

This is the optional WCE Center Drive Shaft Setfor the Hot Bodies D8, Ve8, D8T and D8 Atsushi Hara Vehicles.FEATURESConstructed of hardened steelINCLUDES78mm WCE Center Drive Shaft Set with Coupler, Pin and Set ScrewSPECIFICATIONSLength: 3.1" (78mm) from center of outer rounded area0-HBSC7179

Dynamite's 7.2V 1600mAh Ni-MH 6-cell battery pack provides owners of the popular 1/16-scale Traxxas Slash and E-Revo with an affordable option for powering these vehicles to extreme speeds. Designed and engineered specifically for these two platforms, finding a replacement or additional batteries has never been easier or more affordable.FEATURESHigh-capacity Ener-G 1600 Ni-MH cells come pre-wired and ready for use.Fits Traxxas 1/16 Slash and E-Revo.0-DYN1424

0-TTRPD0979

0-VNR0438

CNC Machined Alum. 1 Deg. Toe-in Rear Hub Carriers for Traxxas Slash, Stampede VXL, Rustler VXL (Blue) Designed to add 1 deg. of rear toe-in for increased stability and traction on your Traxxas Slash, Stampede VXL, Rustler VXL. CNC machined from high-quality aluminum material, these rear hub carriers holds the tight-tolerance for an accurate 1 deg. toe-in. A set-screw over the hinge-pin design secures the hinge-pin in the hub carriers. This design prevents wear from the hinge-pins on the hub...

CNC Machined from high grade aluminum material, these aluminum Rear A-arms will bullet proof your Traxxas Stampede and Rustler. For smooth suspension operation, the hinge-pin holes are fitted with machined delrin inserts. Each set of A-arms also comes with high-grade steel hinge-pin set w/e-clips. Solid in design and construction. (1 pair) Note: not compatible with Traxxas Slash as the Slash uses a shorter rear arm Go aluminum...because real trucks don't have plastic arms! If used on Slash 4x4...

CNC Machined from high grade aluminum material, these aluminum Rear A-arms will bullet proof your Traxxas Stampede and Rustler. For smooth suspension operation, the hinge-pin holes are fitted with machined delrin inserts. Each set of A-arms also comes with high-grade steel hinge-pin set w/e-clips. Solid in design and construction. (1 pair) Note: not compatible with Traxxas Slash as the Slash uses a shorter rear arm Go aluminum...because real trucks don't have plastic arms! If used on Slash 4x4...

HSP 58041 Ball Head B1:18 1/18 Model Car Buggy MonsterTruck Short Course Truck Spare Parts/ 948070-CIS58041

HSP genuine part 58040 Ball Head A for 1/18 RC Car Buggy Moster Truck 948070-CIS58040

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58128

0-ARZC1020

This is the Ceramic Bearing 5x16x5mm From the Acer Racing Ceramic Nitro Pro SeriesFEATURESMetal and ceramic constructionINCLUDESOne ceramic bearingSPECIFICATIONSOuter diameter: 16mmInner diameter: 5mmThickness: 5mm0-ARZC1076

0-WGT401

Thick CF Rear Shock Mnt: XXX-4Xtreme RacingPart XTR10351T0-XTR10351T

HSP 58013 Centre Dogbones1:18 1/18 Model Car Buggy MonsterTruck Short Course Truck Spare Parts/ 948070-CIS58013

5 x 10 x 4 mm.0VA-SWK2620

Our new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection. Our conversion kit does it right by including a specific set of front steel axles that allows proper installation of the front 17mm hex adapters. Each piece of 17mm hex adapters are machined out of high-quality aluminum, and using a unique set-screw behind drive pin design, you'll never have to worry about...

HSP 58010 Steering Arm Complete1:18 1/18 Model Car Buggy MonsterTruck Short Course Truck Spare Parts/ 948070-CIS58010

HSP RC CAR ACCESSORIES SPARE PARTS 58031 DIFF. CUP FOR HSP 1/18 SCALE ELECTRIC POWERED REMOTE CONTROL BUGGY ITEM NO. 948050-CIS58031

Differential Main Gear (45T) for 1:18 HSP cars0-CIS58046

HSP RC CAR ACCESSORIES 58047 DIFF. MAIL GEAR COMPLETE 2T MOTOR GEAR, 58113 DIFF. MAIL GEAR COMPLETE 4T MOTOR GEAR FOR 1/18 948050-CIS58047

0-DYN1171

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58137

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58148

0-CIS58125

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58129

For 1:18 HSP Monster Truck / Buggy / Truggy 2.4Ghz 4WD0-CIS58123

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58130

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58155

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58151

Fits HSP 2.4Ghz 4WD Short Course Truck / Monster Truck / Buggy & Truggy0-CIS58150

This is a "Gravedigger #12" Truck Body.This is the thin, clear plastic piece that covers the truck's chassis and provides the "shape" of the truck.FEATURESHighly detailed body and cutting linesIncludes window masking sheetFlexible Parma decals include: "Gravedigger", skull, green flames,grill, head lights, "Parma International"INCLUDESOne clear body.Two Parma decal sheets.One window masking sheet.REQUIREMENTSPolycarbonate paint for painting the inside of the body. The colorchoice is up to the...

Set of 4 body clips 18-8 Stainless Steel, Clevis Diameter 1/4". Wire Diameter 3/64"0-BCLIP

0-BCLIP4-16

This is a Complete Line of Hob-E-Lube Lubricants from Woodland Scenics.It's a 7-Pak Workbench Assortment of Precision Craft Lubricants for Craftsmen.Hob-E-Lube, by Woodland Scenics, is a complete, special-purpose line oflubricants precision designed for tough, close-tolerance model requirements.All Hob-E-Lube lubricants have been thoroughly researched for use with trains,R/C cars, planes, and boats and are plastic and paint compatible. This super-saver 7-Pak Workbench Assortment includes all...