Products 1-2 of 2
Item #: GM10 -
81:1, 454RPM, 20mA (220mA stall) at 6V gives 3.17 in-oz torque.These little gear motors measure 20.8 x 29.0 x 25.4mm (0.82 x 1.14 x 1.00") and weigh in at 4.7g (0.17oz). The square output shaft measures 3.56mm (0.14") per side, and the leads measure 5cm (1.95") long. They're a bit funky in that they're not continuous rotation by default. They have a self-centering spring, so applying DC power will result in a 60 degree swing in one direction. Reversing power swings the output arm 60 degrees...
Item #: MASG3550 -
SpecsWeight: 7 oz.Motor Shaft Size: 3.2 mm ( just under 1/8”)Use a 25 amp fuseFor a Speed Controler - also called an “ESC”, use one rated min. 20 amps#16 wire for connectionsNote: capacitors are built in this motor.Battery: uses 7.2 volts - 6 cells FeaturesMade with Ferrite Magnets.Built-in capacitorsRuns with 6-7 cellsFor both direct drive and geared systems0-MASG3550