Products 1-13 of 13
Show
143:1 Gear Motor Steel Mount
Price: $1.49
View
Availability: In Stock
Solarbotics Item #: GMB28 -

The provided mounting holes in the 143:1 Angled Gear Motors are a convenient way to mount these to your project, but sometimes you just need a different way to mount them. These precision laser-cut steel brackets match the features on the gear motor, and securely clamp them down to your project.Use any #4-sized screw or nut/bolt for assembly, but we use special #4x1/2" screw designed for threading plastic to mount these to our chassis. This screw also does a great job going into the steel...

224:1 Gear Motor Steel Mount
Price: $1.49
View
Availability: In Stock
Solarbotics Item #: GMB39 -

The provided mounting holes in the 224:1 Gear Motors are a convenient way to mount these to your project, but sometimes you just need a different way to mount them. These precision laser-cut steel brackets match the features on the gear motor, and securely clamp them down to your project.Use any #4-sized screw or nut/bolt for assembly, but we use special #4x1/2" screw designed for threading plastic to mount these to our chassis. This screw also does a great job going into the steel...

Ampflow Mount 1/2 inch thick - no heatsink (1 mount)
Price: $23.00
View
(1)
Availability: Available
DCWaterjet Item #: MAG50 -

These are custom-designed mounts for both the A28-150 or the A28-400 Ampflow motor.Constructed using 1/2" thick 6061-T6 aluminum. All mounts come with two holes in the base for 1/4" screws, and two bolts are included to attach the top half of the mount around your motor- couldn't be more simple to install.There are no other mounts made for this motor that are specifically-designed for fast swap-out. Nothing worse that having to break down your entire robot just to get a motor out, especially...

Ampflow Mount 1/2 inch thick - with heatsink (1 mount)
Price: $30.00
View
Availability: Available
DCWaterjet Item #: MAGF50 -

These are custom-designed mounts for both the A28-150 or the A28-400 Ampflow motor.The addition of the cooling fins helps dissipate the heat that this motor can produce, allowing your motor to run more efficiently. Constructed using 1/2" thick 6061-T6 aluminum. All mounts come with two holes in the base for 1/4" screws, and two bolts are included to attach the top half of the mount around your motor- couldn't be more simple to install.There are no other mounts made for this motor that are...

Etek motor mount
Price: $55.00
View
(2)
Availability: Available
DCWaterjet Item #: ETEK50 -

When it comes to holding down this powerful motor, you don't want to kid around. This slick-looking and extremely durable mount was designed specifically for the huge Etek motor and the rigors of Robotic Combat.This custom-designed mount is made of 1/2" thick 6061-T6 aluminum and comes with eight countersunk bolts to fasten directly to an Etek motor without any modifications. Simply bolt up the 8 holes to the face of your Etek, and then bolt the four remaining holes on the flanges to your...

EV Warrior Motor Mount
Price: $29.99
View
Availability: Discontinued
Kenward Item #: EVM-01 -

The perfect, light weight solution to mounting the EV Warrior motors.Made from Green UHMW. This very interesting material is very light, yet surprisingly strong. Polyethylene UHMW has a high melt viscosity, has outstanding toughness and cut/wear resistance and very good chemical resistance.Stock EV MountClamp style mounts, standard 1/4" mounting holes. Designed for quick swap-out of the motor, you don't need to disassemble your entire robot to swap out a motor- 2 bolts on the top, and your...

FingerTech Motor Mount (pair)
Price: $4.49
View
(1)
Availability: In Stock
FingerTech Robotics Item #: FT-MOTOR-MOUNT -

These anodized aluminum motor mounts will fit just about any small motor with mounting hole distances from 10mm - 12.5mm (0.39 - 0.49in). Especially suited to both Gold and Silver Spark motors, they will also hold all "Mini Metal Gearmotors", small Copal motors, Maxon motors, etc.Seven different mounting slots will fit up to 3mm or 4-40 sized screws.Width: 16mm (0.63in)Height: 19.8mm (0.78in)Length: 18.6mm (0.73in)Thickness: 1.45mm (0.057in) Shaft height: A motor with 11mm hole spacing will...

Kitbots Mounting Plates for 1000 RPM Motor
Price: $24.50
View
Availability: Available
Kitbots Item #: 1000RPMMNT -

Each set includes two plates, four M3x5 screws and eight #4 Plastite screws - enough to mount two motors. The plates are precision watercut from 1/16" 6061 Aluminum to fit on the end plate of the 1000 RPM motor.The two M3 screws secure the plate to the motor (loctite recommended) and the four #4 Plastite screws are used to mount the plate to your chassis. All you need to mount the motor to your chassis is cut a hole big enough for the motor body and drill four pilot holes for the #4 screws.The...

Kitbots Mounting Plates for FingerTech Spark/Silver Spark Motors
Price: $24.50
View
Availability: Available
Kitbots Item #: FTMP1 -

Each set includes two plates, four 2-56 x 3/16" screws and eight #2 Plastite screws - enough to mount two motors. The plates are precision water cut from 0.060" 6061 Aluminum to fit on the end plate of the FingerTech Spark and Silver Spark Motors.The 2-56 screws secure the plate to the motor (loctite recommended) and the four #2 Plastite screws are used to mount the plate to your chassis. All you need to mount the motor to your chassis is cut a hole big enough for the motor body and four pilot...

Micro Metal Gearmotor Bracket  - Set of Two
Price: $4.99
View
Availability: In Stock
Pololu Item #: 989 -

This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation.Four #2-56×7/16" screws and four nuts are included with the two bracket. Note: These brackets have mounting holes that are very close to the output shaft end of the motor, which could cause mounting difficulties if your wheelshave recessed hubs. For such applications we...

Micro Metal Gearmotor Extended Bracket - Set of Two
Price: $4.99
View
(1)
Availability: In Stock
Pololu Item #: 1089 -

This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation.Four #2-56×7/16" screws and four nuts are included with the two bracket. This extended version of the bracket is designed to allow a portion of the motor to fitwithin the hub of a larger wheel.NOTE: This will NOT fit the 1000:1 Micro geared motor.0-PL1089 ...

Mounts for DeWalt Motor & Dustin Motor
Price: $50.00
View
Availability: Discontinued
DCWaterjet Item #: M01 -

Custom-fit mounts just for the DeWALT 24V HammerDrill motor or Dustin motor. Made from 6061-T6 aluminum. Complete mounting kit contains everything you see in the photo to the left, everything you need to mount one motor.These mounts are specificaly designed to securely hold the DeWalt motor and transmission together tightly, typically a very challenging task.DCW-M01 Dimensions ...

RMP Aluminum Front Plate Mount for 24V DeWalt Motor
Price: $26.99
View
Availability: In Stock
Item #: DWMOUNT -

We had these aluminum face mount plates for the DeWalt 24V Hammerdrill Motor made just for us. Installation requires very minor modification of the motor, and provides four 0.25" deep #10-32 mounting holes on a 2.1875" bolt circle. 2.5in. outer diameter3/8in. thick0-DWMOUNT