Products 1-21 of 21
Show
BSI IC-2000 Rubber-Tough CA 1/2oz
Price: $4.99
View
Availability: In Stock
Bob Smith Industries Item #: BSI117 -

This is a half ounce bottle of Bob Smith Industries IC-2000™ Rubber-Toughened CA Glue. IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds,...

BSI Insta-Cure Super Thin CA 1/2 oz
Price: $3.99
View
Availability: Available
Bob Smith Industries Item #: BSI101 -

Insta-Cure Super Thin .5oz CA Adhesive GlueINSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface...

BSI Insta-Cure+ GAP Filling 1/2oz
Price: $3.99
View
Availability: In Stock
Bob Smith Industries Item #: BSI106 -

This is a half ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling CA Glue. INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as lamination's, INSTA-CURE+ ™ should also be used. To prevent premature curing, don't spread the glue into a thin...

BSI Maxi-Cure Extra Thick CA 1/1oz
Price: $3.99
View
Availability: In Stock
Bob Smith Industries Item #: BSI111 -

MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.0-BSI111

BSI Super-Gold + Odorless CA 1/2 oz
Price: $8.99
View
Availability: In Stock
Bob Smith Industries Item #: BSI126 -

This is a half ounce bottle of Bob Smith Industries SUPER-GOLD+™ Gap Filling, Odorless, Foam Safe CA Glue. SUPER-GOLD™ and SUPER-GOLD+™ are BSI's odorless INSTA-CURE CAs. They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™'s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF's. They will not fog clear plastic. SUPER-GOLD+™...

Great Planes Pro CA Glue Thin, 0.5oz
Retail: $3.49
Price: $3.39
View
Availability: Available
Great Planes Item #: GPMR6001 -

The Pro CA Glues are clog-resistant with extra-long applicator tips to easily reach into tight spots. Easy to squeeze bottles aid in applying just the right amount of glue-for easier sanding and less mess. All Great Planes CA glues have a satisfaction guarantee, best if used by date and are clear.Wicks quickly for instant bonds on tight-fitting parts, tacking and CA hinges.Not safe for foam. For foam applications use epoxy or foam-safe CA.INCLUDESOne Pro CA Glue 1/2 oz ThinCOMMENTSThin CA:...

INSTA-FLEX 1 OZ
Price: $9.99
View
Availability: Available
Bob Smith Industries Item #: BSI-119 -

Insta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle and remains clear, even if accelerated with INSTA-SET™. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE™, INSTA-FLEX™ still has good penetrating qualities and its application can be easier to control. For CA hinges, we recommend drilling a 1/16" hole in the center of the hinge slots to insure the complete...

MAXI-CURE / INSTA-SET 2 FL OZ.
Price: $11.99
View
Availability: In Stock
Bob Smith Industries Item #: BSI-157H -

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of...

Poly ZAP Glue, 1/2 oz
Price: $5.99
View
Availability: In Stock
Item #: PAAPT22 -

0-PAAPT22

Zap A Gap CA+ Glue, 1oz.
Retail: $8.39
Price: $7.49
View
Availability: In Stock
Pacer Glue Item #: PAAPT02 -

Super fast cure instant glue. Thin, penetrating action forumla. Superior wicking action.1oz.0-PAAPT02

Zap A Gap CA+ Glue, 2oz
Retail: $14.69
Price: $12.99
View
Availability: In Stock
Pacer Glue Item #: PAAPT01 -

Fills gaps. Allows 7 to 10 seconds for positioning. Cures in about 20 seconds. Bonds anything, even oily surfaces.2oz. 0-PAAPT01

Zap A Gap Glue, 4oz
Retail: $28.99
Price: $26.99
View
Availability: In Stock
Item #: PAAPT05 -

This is a 4oz Bottle of Zap-A-Gap CA+ Glue from Pacer.Not safe for foam. For foam applications use epoxy or foam-safe CA.FEATURESSuperior gap filling formula.Medium viscosity.Allows approximately 7-10 seconds for part positioning.Average of 20 seconds curing.Works on oily surfaces also.Use Zip Kicker (PAAR2405) to accelerate cure time.INCLUDESOne 4oz Bottle of Zap-A-Gap CA+ Glue.SPECIFICATIONS4oz (113.6g)0-PAAPT05 ...

Zap A Gap Medium CA+ Glue, 0.25oz
Price: $3.99
View
Availability: In Stock
Zap Item #: PAAPT04 -

Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 24 hours. Accelerate with Zap Kicker. Bonds anything, even oily surfaces!0.25oz. Medium viscosity. 0-PAAPT04

Zap A Gap Medium CA+ Glue, 0.5oz
Price: $4.99
View
Availability: In Stock
Item #: PAAPT03 -

Fills gaps. Allows 7 to 10 seconds for positioning. Cures in about 20 seconds. Bonds anything, even oily surfaces.0.5oz. 0-PAAPT03

Zap Adhesives Zap Gel CA .11 oz
Price: $1.99
View
Availability: In Stock
Item #: PAAPT27 -

This is a .11oz (3g) Tube of Zap-Cel CA Glue from Pacer.Not safe for foam. For foam applications use epoxy or foam-safe CA.FEATURESJelly-like concentrated CA glue.Super thick formula.Will not run or flow.Can be applied to vertical or overhead surfaces.Use Zip Kicker (PAAR2405) to accelerate cure time.INCLUDESOne .11oz (3g) Tube of Zap-Gel CA Glue.SPECIFICATIONS.11oz (3g)0-PAAPT27

ZAP CA Glue, 1/4 oz
Price: $3.99
View
Availability: In Stock
Item #: PAAPT10 -

0-PAAPT10

Zap CA Glue, 1oz.
Retail: $8.99
Price: $7.39
View
Availability: In Stock
Pacer Glue Item #: PAAPT08 -

Gap filling formula bonds virtually anything: wood, veneers, rubber, leather, most plastics and metals. Works on oily surfaces: fuel soaked planes, cars, boats, and pre-stained miniatures.1oz.0-PAAPT08

Zap CA Glue, 2 oz
Retail: $13.99
Price: $13.29
View
Availability: In Stock
Pacer Glue Item #: PAAPT07 -

Gap filling formula bonds virtually anything: wood, veneers, rubber, leather, most plastics and metals. Works on oily surfaces: fuel soaked planes, cars, boats, and pre-stained miniatures.2oz.0-PAAPT07

Zap CA Thin Glue, 0.5oz.
Price: $4.99
View
Availability: In Stock
Pacer Glue Item #: PAAPT09 -

Gap filling formula bonds virtually anything: wood, veneers, rubber, leather, most plastics and metals. Works on oily surfaces: fuel soaked planes, cars, boats, and pre-stained miniatures.0.5oz.0-PAAPT09

Zap Slo Zap CA- Glue, 1oz
Retail: $8.59
Price: $8.39
View
Availability: Available
Pacer Glue Item #: PAAPT20 -

Very high viscosity formula.Super thick and super strong.Allows approximately 30-40 seconds for part positioning.Cures in 90 seconds.Ideal for fillet forming, gap filling, wing sheeting, laminating, etc.Use Zip Kicker to accelerate cure time. 1oz.0-PAAPT20

Zap Slo Zap Glue, 2oz.
Retail: $15.49
Price: $12.99
View
Availability: In Stock
Pacer Glue Item #: PAAPT33 -

Very high viscosity formula.Super thick and super strong.Allows approximately 30-40 seconds for part positioning.Cures in 90 seconds.Ideal for fillet forming, gap filling, wing sheeting, laminating, etc.Use Zip Kicker to accelerate cure time. 2oz.0-PAAPT33