Robart Manufacturing

This is the Robart Main Gear Assembly for 1/4 Scale Piper Cub Kits.This Main Gear Assembly fits on the bottom of the fuselage.FEATURESFits the Hangar 9, Sig and any other 1/4 scale cubs with a fuselagewidth of 6-1/2" (165mm), seeCOMMENTS belowProvides a more realistic scale appearance for your 1/4 scale Cub.Pre-primed steel may be painted to modeler's preference.May use existing wheels a with 3/16" axle diameter.INCLUDESTwo upper and two lower braces.One right and left hand frame.Two 3/16"...

0-ROB124

0-ROB190

This is a Hand Pump for Charging Pneumatic Retract Systems with Air.FEATURESHas a High Stroke-To-Bore Ratio so High Pressures with Minimum EffortRated at Over 100 psiGauge on the Pump w/Ball Check Valve so Tank Pressure can be ReadBright Nickel FinishINCLUDESOne 100 psi Hand Pump w/Gauge and 14" Red Tubing0-ROBQ2363

This is the Robart Fill Chuck.FEATURESLightweight aluminum with rubber O-ringReplacement fill fitting for #168 Fill Valve and Fill ChuckINCLUDESOne fill chuckSPECIFICATIONSLength: 0.79" (20mm)0-ROBQ2374

0-ROBQ2505

0-ROBQ2510

0-ROBQ2403

0-ROBP1401

This is a Fill Valve and a Fill Valve Fitting from Robart.FEATURESLightweight AluminumWorks with Most Retract SystemsFills with Air from Both Pumps and CompressorsINCLUDESOne Fill ValveOne Fill Valve Fitting0-ROBQ2368

0-ROBQ2369

0-ROBQ2305

0-ROBQ2508

This is a package of 6 Super Hinge Points from Robart. These hinges are for 1/4 scale and other large scale uses. These install by drilling a 3/16" hole and inserting the hinge with a drop of glue.0-ROBQ2509

This is a Variable Rate Speed Control Valve from Robart.This is used to vary the rate at which a pneumatic retract functions.FEATURESRed anodized aluminum, brushed aluminum, and brass construction.INCLUDESOne variable rate control valve.One instruction manual.REQUIREMENTSAssembly onto kit.Rate adjustment.SPECIFICATIONSLength: 53.3mm (2.099")Width: 14.3mm (.562")Overall height: 24.0mm (.946")0-ROBQ2300 ...

0-ROB204

0-ROB310

0-ROB112

0-ROB137