Products 1-3 of 3
Item #: EVCABLE -
A very durable plug-in style connector for your EV motors. Cables include EV motor connector at one end, and spade-style connectors on the other, as shown in the photo. You can cut off the connectors if you want to use your own. Wires are approximately 18" long. Provides a very solid connection for the wires to the rest of your system.Note: you don't need to hook up the center pin of the EV motor in most cases. If you're using it on a robot, just use the outer two wires to go to your power...
Availability: In Stock
Item #: EVCW -
CW EV 12v 24v No load rpm 2640 rpm 5380 rpm Peak Horsepower .368 hp 1.53 hp No load current 3.9 A 3.9 A Stall current 99.2 A 198 A Stall torque 563 oz-in 1150 oz-in Weight 3.24 lbs Diameter 4 in. Length 2.72 in. Shaft 8mm diameter x 30mm When installing, you will notice there are 3 pins on the connector of this motor, you may ignore the center one and hook your + and - to the outer two pins. Reverse the polarity to reverse direction of the motor (or just let your speed controller do that for...
Item #: EVM-01 -
The perfect, light weight solution to mounting the EV Warrior motors.Made from Green UHMW. This very interesting material is very light, yet surprisingly strong. Polyethylene UHMW has a high melt viscosity, has outstanding toughness and cut/wear resistance and very good chemical resistance.Stock EV MountClamp style mounts, standard 1/4" mounting holes. Designed for quick swap-out of the motor, you don't need to disassemble your entire robot to swap out a motor- 2 bolts on the top, and your...