Products 1-21 of 21
Show
MINDS-i 2WD Racecar Chassis Kit With Electronics
Price: $275.00
View
Availability: Available
Item #: CKE-RC02-001 -

Click photo to enlarge.When speed is what youre after, the MINDS-i 2WD Racecar will provide the rush youre looking for. Speed and elegance go head to head with versatility in this outstanding starter kit. This kit comes with all the necessary components, electronics and hardware needed to assemble this fast and sleek 1/10th scale Racecar, and includes easy to use visual instructions and is compatible with most Hobby standard DC Motors, Gears, Radio Transmitters, Servos, Bodies, Wheels & Tires...

MINDS-i 2-in-1 Super Rover Kit with Electronics
Price: $650.00
View
Availability: Available
Item #: CKE-AV06-002 -

The ultimate in extreme Autonomous Unmanned Vehicles (AUV), the MINDS-i two-in-one Super Rover kits provide everything you need to start the adventure--try the 4x4 Super Crawler or the 6x6 Rover, the most rugged all-terrain vehicles in the MINDS-i collection. Explore various add-on modules such as transmitters, micro-controllers and a never-ending array of sensors to make your kit do just about anything you can imagine. This kit comes with all the necessary components, electronics and hardware...

MINDS-i Dual Motor Upgrade Module for Super Rover Kit
Price: $145.00
View
Availability: Available
Item #: AMT-6X65-000 -

The 6x6 Dual Motor Upgrade Module is designed to increase the power and capability of your 6x6 or Super Crawler Chassis. With two motors, you nearly double the power and weight the chassis can carry. Whether you need the extra power for a rough and tough obstacle course or for adding a micro-controller and sensor packs, this will allow your 6x6 or Super Crawler to carry whatever you need.This kit comes with all the necessary components, electronics and hardware needed to assemble and install a...

MINDS-i Solar Panel Upgrade Module for 4x4 & 6x6 Kits
Price: $394.00
View
Availability: Available
Item #: ESP-SPAO-001 -

The Solar Panel Upgrade module is designed with the eco friendly robot builder in mind. It allows complete recharging of the battery in minimal time. This kit comes with all the necessary components, electronics and hardware needed to add a solar panel to your 4x4 or 6x6 frame.Includes Solar Panel, Charge Controller, necessary beams, connectors, etc.0-ESP-SPAO-001

Arduino Autonomous Upgrade Module
Price: $249.00
View
Availability: Available
Item #: EMC-ARD1-001 -

Ready to take robotics to the next level? MINDS-i now offers the new Arduino Module kit designed for the 4x4 and 6x6 chassis. With just a few connectors put this on your MINDS-i kit and program it. Autonomous Navigation is made easy with MINDS-i and the Arduino Uno. The set includes easy to use visual instructions with "Quick Start" Programing guide. Program your MINDS-I kit with the Arduino Uno, a micro controller based on the Atmega328. It has 14 digital input/output pins (of which 6 can be...

MINDS-i Screw Adapter Kit
Price: $15.00
View
Availability: Available
Item #: CKN-SA01-100 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!100 piece assortment of screws and adapters. Includes (10) 1inch screws, (10) 1 3/8inch screws, (60) clearance thread adapters, (20) standard thread adapters and 3/32 Allen wrench.0-CKN-SA01-100

MINDS-i Servo Linkage Kit
Price: $19.00
View
Availability: Available
Item #: ADM-SL01-001 -

MINDS-i construction sets are not just a LEGO Technic clone. They are bigger, stronger, and will let you do far more. All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This kit enables you to incorporate Servos into your MINDS-i Construction System, allowing you to actuate...

MINDS-i Rack And Pinion Kit
Price: $24.00
View
Availability: Available
Item #: ADM-ST01-001 -

MINDS-i construction sets are not just a LEGO Technic clone. They are bigger, stronger, and will let you do far more. All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This kit enables you to link Servos into your MINDS-i Construction System, allowing you to build and...

MINDS-i 12mm Hex (4mm Axle) Steering Hub Kit
Price: $24.00
View
Availability: Available
Item #: ADM-SH04-001 -

MINDS-i construction sets are not just a LEGO Technic clone. They are bigger, stronger, and will let you do far more. All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This 4mm Axle Steering Hub Kit integrates into all MINDS-i building systems, and is compatible with most...

MINDS-i Drive Line Pack
Price: $24.00
View
Availability: Available
Item #: ADM-DL01-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This Drive Line Pack integrates into all MINDS-i building systems, and accommodates short, medium or long wheel bases and motor drive system. - Includes Male Drive Lines (2), Female Drive Lines (2), Yokes (4), Cross (4), and...

MINDS-i 14mm Hex (5mm Axle) Rear Hub Kit
Price: $22.00
View
Availability: Available
Item #: ADM-RH05-001 -

MINDS-i construction sets are not just a LEGO Technic clone. They are bigger, stronger, and will let you do far more. All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This 5mm Rear Hub Kit integrates into all MINDS-i building systems, and is compatible with most Hobby...

MINDS-i 12mm Hex (4mm Axle) Rear Hub Kit
Price: $22.00
View
Availability: Available
Item #: ADM-RH04-001 -

MINDS-i construction sets are not just a LEGO Technic clone. They are bigger, stronger, and will let you do far more. All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This 4mm Rear Hub Kit integrates into all MINDS-i building systems, and is compatible with most Hobby...

MINDS-i Differential Kit
Price: $42.00
View
Availability: Available
Item #: ADM-DF01-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This Differential Kit integrates into all MINDS-i building systems, and comes with optional Slip and Solid Differential drive systems. The pinion angle on the Differential can be adjusted to +/-30 degrees to allow maximum...

MINDS-i Dual Output Differential Kit
Price: $51.00
View
Availability: Available
Item #: ADM-DF02-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This Dual Output Differential Kit integrates into all MINDS-i building systems, and comes with optional Slip and Solid Differential drive systems. The pinion angle on the Differential can be adjusted to +/-30 degrees to...

MINDS-i Motor Gearbox Kit
Price: $22.00
View
Availability: Available
Item #: ADM-MT01-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This Motor Gearbox Kit integrates into all MINDS-i building systems, and is compatible with most Hobby standard DC Motors, Spur & Pinion Gears, and Batteries. - Includes Motor Box (2 halves), Driveshaft (1), Bearings (2),...

MINDS-i Leaf Springs
Price: $15.00
View
Availability: Available
Item #: ASS-LS01-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!Leaf Spring for Cars, Trucks, Robots, etc.- Quantity: 1-pair (2 Leaf Springs)- Weight: 20 grams per-pair- Color: Clear- Length: 6" (153mm)- Height: 2" (51mm)- Made from resilient Polycarbonate Plastic0-ASS-LS01-001 ...

MINDS-i 90mm Shock Absorber Pair
Price: $34.00
View
Availability: Available
Item #: ASS-FU90-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!Shock absorbers for Cars, Trucks, Robots, etc.- Add oil inside shock housing for oil dampening- Quantity: 1-pair (2 shocks, 2 extra springs)- Weight: 56 grams per-pair- Color: blue (colors may vary)- Length: 3.5" (90mm)-...

MINDS-i 250 Piece Basic Construction Set
Price: $85.00
View
Availability: Available
Item #: CKN-BC01-250 -

MINDS-i construction sets are not just a LEGO Technic clone. They are bigger, stronger, and will let you do far more. All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This is a 250-piece set of assorted MINDS-i Construction Elements and Connectors. This set can be...

MINDS-i 6 Inch Four Link Suspension Bars
Price: $19.00
View
Availability: Available
Item #: ASS-FL60-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This is a four-link suspension kit. The rods are 6 inches center to center. Durable steel construction. 0-ASS-FL60-001

MINDS-i 4.8 Inch Four Link Suspension Bars
Price: $18.00
View
Availability: Available
Item #: ASS-FL48-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This is a four-link suspension kit. The rods are 4.8 inches center to center. Durable steel construction. 0-ASS-FL48-001

MINDS-i 3.6 Inch Four Link Suspension Bars
Price: $17.00
View
Availability: Available
Item #: ASS-FL36-001 -

All of the MINDS-i kits are interfaceable with standard hobby servos, motors, and wheels with 12mm or 14mm hex hubs. You can even use Screw Adapters to interface with pieces you build yourself! This is a really fantastic, versatile kit, and it is made right here in the USA!This is a four-link suspension kit. The rods are 3.6 inches center to center. Durable steel construction. 0-ASS-FL36-001