Search Results for "fingertech"

Timing pulleys and belts are the best way to transmit power from your motor to drive wheels or a spinning weapon.While O-Rings and round belts will slip under tension, timing belts have teeth that ensure a positive lock to the pulleys.Pitch (distance between tooth centers): 3mmWidth: 4mmCircumference: 408mmNumber of Teeth: 136TMaterial: Chloroprene Rubber with Fiberglass reinforcementTensile strengh: 19-25MPaWeight (smallest to largest): 1 - 4g (0.04 - 0.14oz)0-FT-BELT-408MM Belt Length...

Timing pulleys and belts are the best way to transmit power from your motor to drive wheels or a spinning weapon.While O-Rings and round belts will slip under tension, timing belts have teeth that ensure a positive lock to the pulleys.Pitch (distance between tooth centers): 3mmWidth: 4mmCircumference: 222mmNumber of Teeth: 74TMaterial: Chloroprene Rubber with Fiberglass reinforcementTensile strengh: 19-25MPaWeight (smallest to largest): 1 - 4g (0.04 - 0.14oz)0-FT-BELT-222MM Belt Length...

These anodized aluminum motor mounts will fit just about any small motor with mounting hole distances from 10mm - 12.5mm (0.39 - 0.49in). Especially suited to both Gold and Silver Spark motors, they will also hold all Mini Metal Gearmotors small Copal motors, Maxon motors, etc.Specifications:- Width: 16mm (0.63in)- Height: 19.8mm (0.78in)- Length: 18.6mm (0.73in)- Thickness: 1.45mm (0.057in)- Shaft height: A motor with 11mm hole spacing will raise the motor shaft up to 11.7mm (0.46in).- Seven...

Note: This is the old style wheel, which we only have 1 left in stock!FeaturesThe gold-yellow anodized aluminum hubs have a machined pair of rings and captive slots for keeping the tire in place.Tire tread composed of Shore A20 polyurethane makes these the highest traction wheels you can buy.SpecsHub material: 6061 Aluminum, anodized gold-yellowTire material: Shore A20Weight: 61grams (2.15oz)Outer Diameter: 44.45mm (1.75")Length: 38.1mm (1.5")Inner Diameter: 31.75mm (1.25")Inner Depth: 31.75mm...

These upgraded tinyESCs replace both versions of the old style controller. All the features of the expensive "w/ BEC" version at the price of the basic! Version 2.3, now with 50% higher continuous-current capacity! Thicker pcb traces shunt heat away from the driver chip faster - meaning you can run larger motors!These are the smallest and lightest motor controllers currently manufactured for RC hobby robotics. They take up very little space but can handle more than enough motor current for...

Want to use our Silver Spark gearbox with your own motor? Stripped one out during combat? Maybe you just want some spares for the next event. Here you go!- Easy to replace - just two screws.- Weight: 11.8g (0.416oz)- For more specs and information, see the Silver Spark product pages.0-FT-GB22

Want to use our Silver Spark gearbox with your own motor? Stripped one out during combat? Maybe you just want some spares for the next event. Here you go!- Easy to replace - just two screws.- Weight: 11.8g (0.416oz)- For more specs and information, see the Silver Spark product pages.0-FT-GB33

This bearing block can be used as a motor mount for 16mm gearmotors (such as our Spark motors) or as a simple bearing block for a 3mm shaft. The bearing works with the Spark Motors by aligning the mounting holes to the Spark mounting holes and offers additional shaft support. Specifications:- Height: 19.05mm (0.75in)- Width: 25.4mm (1.0in)- Thickness: 4.76mm (0.188in)- Weight: 5grams (0.18oz)- Includes pressed-in 3mm shielded ball bearing- Twelve 4-40 threaded holes for mounting in many...

Cobra Minisumo Wheels are top-quality competition wheels.- The fiberglass-infused nylon hubs are designed with a ring of captive holes for locking the tire tread in place.- Tire tread composed of Shore A20 polyurethane makes these the highest traction wheels you can buy.- The wheel is designed to envelop a 16mm gearbox. Perfect where length is a concern. (Two Gold Spark motors with these wheels will fit into the 10cm width limit of minisumo events.)- An extra-long setscrew allows you to easily...

Lite Flites are the most popular robot wheels due to their very light weight, shock-absorbtion and surprisingly good traction. Their one flaw is the plastic hub that is difficult to secure to a motor shaft. Well, not any more!With Snap Hubs, you can easily and securely mount these foam tires to your robot.Specifications:- Anodized 6061 aluminum for high strength and low weight.- The foam tire is held tightly by a custom washer, and features a recess to prevent the snap ring from coming off...

Updated Oct 2023! The new design now separates the wheel from the hub, so you can swap between robots with different motor shaft sizes without having to buy a whole new set of wheels! • By popular demand, we have brought our experience from molding mini-sumo wheels into larger Sumo Wheels! • Our high-traction polyurethane is molded in four sizes around a machined and anodized aluminum rim. Features: - The black anodized aluminum rims have a machined pair of rings and captive through-slots for...

Use these Hubs to lock your Sumo Tires to shafts of different diametersIncludes:- One Sumo Hub (choose your bore diameter) made of 6061 Aluminum, anodized gold-yellow- Three 4-40 x 0.375in screws to fasten the Sumo Hub to your Sumo Wheel.- One 6-32 steel setscrew allows you to easily tighten the wheels onto a range of motor shafts. (The 0.50in bore with keyway includes a second 6-32 setscrew.)0-FT-SUMOHUB1

FingerTech's Blade Hub is the best way to attach a blade to a shaft. It uses a flange nut to hold the blade tightly (like an angle grinder), meaning you can use off-the-shelf sawblades without needing to drill screw holes into hardened steel! Custom blades can be made stronger by not having those same mounting screw holes. The stepped design allows use of blades with different bore sizes. A clamp mount with two screws attaches the hub to your weapon motor shaft. (Remember to apply...

Take your Viper Combat Robot kit to the next level by adding a powerful servo-actuated lifting arm!Kit INCLUDESServo: GS-5515MG servo with FingerTech Servo MountsLift Arm: Spring steel Scoop and Linkage, Polycarbonate arms, threaded Crossbar, two 2x1 Mini NutStrip piecesScrews: Nine 4-40x0.25, eight 6-32x0.25 and four 6-32x0.5 screws plus hex wrench.Instructions: Detailed instructions with pictures.Specifications:Lift Height: 19cm (7.5in) - 90 degrees (can self-right from upside down!)Weight:...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following. If your application will be close to or exceeding the specified torque limits, check out our Silver Spark motors.- The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.- All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.- 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1- At only 28grams...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either! These motors make it super simple to get a robot moving! Just pick up a pair of Lite Flite wheels and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to go! For strenuous conditions (such as robot combat), we recommend using Loctite on the screws that hold the gearbox to...

Lite Hubs press into Lite Flite wheels, providing a secure and very lightweight method of mounting a wheel onto a motor shaft. The new brass collars mean you can tighten the setscrew as hard as you want without worrying about stripping the threads! Lectra Lites and 1.5" Lite Flites should be drilled out to 5/32".A dab of CA glue is recommended for a permanent fixture.Material: Nylon (same as Lite Flite wheels)Bore diameter: 3mmCan be drilled out for 1/8" motor shafts.Includes two Lite Hubs and...

These anodized 6061 aluminum Flat Motor Mounts are used to face-mount motors to flat robot sides. Specifications:- Sold in pairs- Width: 38.1mm (1.5in)- Height: 31.75mm (1.25in)- Thickness: 1.63mm (0.06in)- 11mm hole pattern for Antweight motors such as Gold Spark, Silver Spark, etc. Uses 2-56 button head screws.- 17mm hole pattern for Beetleweight motors such as Kitbots 1000RPM, etc. Uses M3 countersunk screws.- 18mm hole pattern (not pictured, new revision) for Beetleweight motors such as...

Add a vicious horizontal spinner weapon to your Viper Combat Robot!Kit INCLUDESMotor: D2822/17 1100KV Brushless Motor + screwsController: 20A Brushless Speed ControllerHub: Blade Hub holds any blade 0-FT-VIPER-HSPIN Instructions

The RadioLink T8S transmitter is a lightweight and comfortable gamepad-style transmitter, with 8 channels of control all easily within reach. Programmable per-channel failsafes, endpoint adjustment, subtrims, servo reverse, dual rates, throttle curves, and 4 custom programmable mixes. Includes R8EF receiver, micro USB cable for programming/charging, spring-return kit for tank drive, FingerTech lanyard for holding the transmitterThe RadioLink T8S transmitter is a lightweight and comfortable...

The simple 6-Channel 2.4GHz Transmitter has a knob and switch for both Channels 5 and 6. This allows you to set a motor speed or servo position, then switch it on to that preset position. The right stick has spring return on both axes, the left stick has a ratchet for the up/down axis.This radio is legal for all RFL Robot Combat events! Upon loss of transmitter signal, the receiver outputs all hold in "off" state. Most new motor controllers (like our tinyESCs) interpret this as motor-off and...

If you will be mounting your Mecanum Wheels on different robots or replacing the motors and need a different shaft bore size, you will want to pick up some extra hubs.Bore is 3mm, can be drilled out to accommodate up to 1/4" shaftsIncludes 6-32 setscrew4x 4-40 tapped holes on a 3/4" bolt circle0-FT-MECHUB-P CAD File

If you will be mounting your Mecanum Wheels on different robots or replacing the motors and need a different shaft bore size, you will want to pick up some extra hubs.Bore is 3mm, can be drilled out to accommodate up to 1/4" shaftsIncludes 6-32 setscrew4x 4-40 tapped holes on a 3/4" bolt circle0-FT-MECHUB-M CAD File

Has your robot been lacking a high-current power switch? Tired of plugging and unplugging the battery during an intense competition? The Mini Switch can be activated with the simple twist of an allen key. No other switch is as small, lightweight and powerful!SpecsMaterial: High-temperature nylon, copper terminals, aluminum screwDimensions: 12.7 x 12.7 x 6.35mm (0.5 x 0.5 x 0.25in)Copper terminals: 3.5mm x 1mm (0.138 x 0.04in) extend 6.35mm (0.25in) from switch bodyWeight: 2.15grams...

Don't like 2-stick 'tank' steering? Need a stick free for weapon control? Using a gyro for drive stabilization?The tinyMixer combines the "left/right" (Aileron) and 'up/down' (Elevator) channels of a single stick into two individual drive channels. This allows you to maneuver the robot with just one thumb, leaving the other open for weapon control.Invert Function: If your robot gets flipped upside down but is still drivable, you can invert the controls and drive it as if it were still...

The B6 PRO Charger is a multifunctional, highly portable charger/discharger and balancer for Li-xx, Ni-xx and Lead Acid batteries.It is packed with features that enable it to charge and monitor the state of your battery packs.The B6 Pro is capable of charging up to 6 cell Lixx (1~15 Ni-xx) packs at 0.1~6.0 Amps. It will charge from 0.1 to 6.0 Amps and this charger can store the data for up to 5 batteries in its internal memory for your convenience.Features:- Microprocessor controlled-...

The C6D Mini Charger is a multifunctional, highly portable charger/discharger and balancer for Li-xx, Ni-xx and Lead Acid batteries.It is packed with features that enable it to charge and monitor the state of your battery packs.The C6D Mini is capable of charging up to 4 cell Lixx (6~8 Ni-xx) packs at 0.1~6.0 Amps. Internal power supply allows this charger to plug directly into the wall! No additional 12V supply needed.Features:- Microprocessor controlled- Individual cell balancing- LiPo /...

The 6-Channel 2.4GHz Receiver provides a reliable link to your robot.This is the V2, compatible with V2 transmitters (any sold after Oct 2010)Specifications:Receiver Size: 4.5x2.3x1.4cm (1.75x0.875x0.53")Weight: 8grams (0.28oz)Operating Voltage: 5V - 7.4VBind multiple receivers to one transmitter.If your robot is not responding to radio commands, you may need to bind the receiver to the transmitter. Binding Instructions: If you power on your robot but the receiver only gives a single fast...

The inexpensive T6A Radio Transmitter requires a PC cable to modify any of the channel variables including mixing and servo reversing. (Download the T6 Manual.)The program is free and can be downloaded below (includes WinXP driver and T6config program).If you are running Vista, you will need to install the Vista driver insteadFor Windows 7 and 10, download the Windows 7-10 DriverThe program we supply in our transmitters is hk-t6a-Viper-mixed-R2Or if you prefer tank steering: hk-t6a-Viper-tank-R...

When you don't want to solder every wire connection, these push-wire terminal blocks are a convenient solution. Easily connect and disconnect up to four 18ga wires to a common connection point. Includes one red and one black terminal block for positive and negative (ground) connections.SpecsIncludes one red and one black push-wire 4-terminal block.Material: Glass-filled nylon, 0.20m Beryllium Copper retainer tabsDimensions (each): 11.0 x 9.8 x 6.6mm (0.43 x 0.39 x 0.26in)Weight (each):...

This D2822/17 Brushless Outrunner is what isused in the FingerTech Viper Vertical and Horizontal Spinner Add-Ons. Its size and power make it ideal for antweight robot weapons.Specifications:KV: 1100rpm/VMax Voltage: 7.2V-11.1V (2S-3S)Max Watts: 102WMax Current: 9.9AMax Resistance: 0.192ΩWeight: 41g (1.44oz)Motor Diameter: 28mm (1.10in)Motor Length: 21.35mm (0.84in). 25.66mm (1.01in) to end of hub extension.Wire Length: 56mm (2.2in)Plug Type: 3.5mm female bullet connectorsShaft Diameter:...

This F2822/17 Brushless Outrunner is what is used in the Viper Vertical and Horizontal Spinner Add-Ons (after June 2020). Its size and power make it ideal for antweight robot weapons.Specifications:KV: 1100rpm/VRPM @ 2S: 8140rpmRPM @ 3S: 12,210rpmMax Voltage: 7.2V-11.1V (2S-3S)Max Watts: 102WMax Current: 9.9AMax Resistance: 0.192ΩWeight: 43g (1.52oz)Motor Diameter: 28mm (1.10in)Motor Length: 21.35mm (0.84in). 25.66mm (1.01in) to end of hub extension.Wire Length: 56mm (2.2in)Plug Type: 3.5mm...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features4.76mm (0.188in) square2.86cm (1.125in) long8x 4-40 threaded holes, spaced 6.35mm (0.25in) apart1.12g (0.04oz)CNC machined6061 Aluminium0-NUTSTRIP-MICRO-SHORT Servo...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features6.35mm (0.250in) square4.29cm (1.688in) long8x 6-32 threaded holes, spaced 9.53mm (0.375in) apart3.52g (0.12oz)CNC machined6061 Aluminium0-NUTSTRIP-MINI-SHORT Servo...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features9.53mm (0.375in) square6.57cm (2.585in) long8x 10-24 threaded holes, spaced 14.5mm (0.571in) apart12.50g (0.44oz)CNC machined6061 Aluminium0-NUTSTRIP-MEDIUM-SHORT Servo...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features12.7mm (0.500in) square8.57cm (3.375in) long8x 1/4-20 threaded holes, spaced 19.05mm (0.75in) apart29.53g (1.04oz)CNC machined6061 Aluminium0-NUTSTRIP-LARGE-SHORT Servo...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features9.53mm (0.375in) square41x 10-24 threaded holes, spaced 14.5mm (0.571in) apart58g (2.04oz)CNC machined6061 Aluminium0-TRT0003 IGS Solidworks Servo Magazine Review ...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features12.7mm (0.500in) square31 x 1/4-20 threaded holes, spaced 19.05mm (0.75in) apart105g (3.70oz)CNC machined6061 Aluminium0-TRT0004 IGS Solidworks Servo Magazine Review ...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features6.35mm (0.250in) square63x 6-32 threaded holes, spaced 9.53mm (0.375in) apart25g (0.88oz)CNC machined6061 Aluminium0-NSMINI IGS Solidworks Servo Magazine Review ...

Tired of tapping dozens (or hundreds!) of holes to hold your robot together? FingerTech is the new manufacturer for Kitbots's NutStrip! NutStrip is the ideal way to fasten panels together at right angles. Four sizes are available to suit bots from fleaweights up to heavyweights. Available now in full and short lengths! Features4.76mm (0.188in) square47x 4-40 threaded holes, spaced 6.35mm (0.250in) apart6g (0.21oz)CNC machined6061 AluminiumPerfect for that Ant or Fairyweight!0-NSMICRO IGS...

- Exactly what your bots need! Lithium Polymer (lipoly) batteries are very lightweight cells, but have a greater power density than NiCads and NiMH.- Lipoly chemistry can supply its rated current for longer than NiMH or NiCad equivalents, which means your weapon and drive will go full-power for longer, rather than sagging voltage as it discharges.- These cells have no problem with the large current requirements of combat robots.- LiPoly cells do not develop bad memory during charging.Specificat...

- Exactly what your bots need! Lithium Polymer (lipoly) batteries are very lightweight cells, but have a greater power density than NiCads and NiMH.- Lipoly chemistry can supply its rated current for longer than NiMH or NiCad equivalents, which means your weapon and drive will go full-power for longer, rather than sagging voltage as it discharges.- These cells have no problem with the large current requirements of combat robots.- LiPoly cells do not develop bad memory during charging.Specificat...

- Exactly what your bots need! Lithium Polymer (lipoly) batteries are very lightweight cells, but have a greater power density than NiCads and NiMH.- Lipoly chemistry can supply its rated current for longer than NiMH or NiCad equivalents, which means your weapon and drive will go full-power for longer, rather than sagging voltage as it discharges.- These cells have no problem with the large current requirements of combat robots.- LiPoly cells do not develop bad memory during charging.Specificat...

- Exactly what your bots need! Lithium Polymer (lipoly) batteries are very lightweight cells, but have a greater power density than NiCads and NiMH.- Lipoly chemistry can supply its rated current for longer than NiMH or NiCad equivalents, which means your weapon and drive will go full-power for longer, rather than sagging voltage as it discharges.- These cells have no problem with the large current requirements of combat robots.- LiPoly cells do not develop bad memory during charging.Specificat...

- Exactly what your bots need! Lithium Polymer (lipoly) batteries are very lightweight cells, but have a greater power density than NiCads and NiMH.- Lipoly chemistry can supply its rated current for longer than NiMH or NiCad equivalents, which means your weapon and drive will go full-power for longer, rather than sagging voltage as it discharges.- These cells have no problem with the large current requirements of combat robots.- LiPoly cells do not develop bad memory during charging.Specificat...