Products 121-144 of 175
Show
VEX Robotics 8-Bay AA/AAA Smart Battery Charger
Price: $24.99
View
Availability: Temporarily Unavailable
Item #: 276-1622 -

This Smart Battery Charger is capable of charging up to eight Ni-MH or Ni-Cd rechargeable AA or AAA batteries. Smart Charger technology provides automatic trickle charging and temperature cutoff during the charge cycle while LEDs provide user feedback on the status of each charging battery.Included:8-Bay AA/AAA Smart Battery ChargerPower AdapterVEX-276-1622 Inventor's Guide Insert ...

VEX Robotics 2000mAh 7.2V NiMH Robot Battery
Price: $19.99
View
Availability: Temporarily Unavailable
Item #: 276-1456 -

The VEX 7.2V Nickel Metal Hydride Battery provides a rechargeable power source for use with your VEX robots. It has the same capacity of the VEX 7.2V NiCad battery with a smaller footprint.Capacity: 2000 mAhRechargeable Nickel Metal Hydride (NiMH)Standard VEX power connectorWARNING: Make sure your charger is capable of charging NiMH Batteries. If using a VEX Charger, the VEX Smart Charger MUST be used to charge this battery! DO NOT use the discontinued VEX Fast Battery Charger to charge NiMH...

VEX Robotics Power Expander
Price: $49.99
View
Availability: Temporarily Unavailable
Item #: 276-2271 -

Use the VEX Power Expander to add a secondary power source for four of the PWM outputs on the VEX Microcontroller. Balance a robot's motor load across two batteries to extend robot run time and increase performance.FeaturesAttach a 2nd battery to your robotPower up to four (4) Motors or ServosReduce motor load on primary batteryRun your robot for longer!Protected by an Internal Circuit BreakerStatus port provides feedback to MicrocontrollerMonitor when your robot trips its breakerMonitor...

VEX Robotics Battery Holder
Price: $4.99
View
Availability: Discontinued
Item #: 276-2036 -

Vex Micro Controller Battery Pack. Requires 6 AA batteries. 9V output when fully loaded with AA cells.VEX-BATTHOLDER STEP file

VEX Robotics Battery Strap, 2-pack
Price: $4.99
View
Availability: Temporarily Unavailable
Item #: 276-2219 -

These Battery Straps are used to mount the 7.2v battery to your robot. The strap is reusable. Two Battery Straps and Mounting Hardware included.VEX-276-2219

VEX Robotics Smart Charger v2
Price: $16.99
View
Availability: Temporarily Unavailable
Item #: 276-2519 -

The VEX Smart Charger v2 is capable of charging ALL VEX rechargeable power packs. Charges both 7.2V and 9.6V batteries Charges both NiCd and NiMH batteries Includes dual charge rates and an automatic shutoff Please note that 228-2604 power cord is sold separately! Input Voltage AC 100-240V Output Voltage 20VDC Weight Smart Charger: 0.526 lbs (238.59 grams) Power Cord: 0.162 lbs (73.48 grams) Actual weight of one item (no packaging) WARNING: The VEX Smart Charger MUST be on the SAFE setting to...

VEX Robotics Battery Charger Power Cord - North America (Type A)
Price: $1.99
View
Availability: In Stock
Item #: 276-2520 -

VEX-276-2520

VEX Robotics 3000mAh 7.2V NiMH Robot Battery
Price: $29.99
View
Availability: In Stock
Item #: 276-1491 -

This VEX 7.2V Nickel Metal Hydride Battery provides a higher-capacity, rechargeable power source for use with your VEX robots. This is our recommended battery for VEX Robotics Competition robots. Capacity: 3000 mAhRechargeable Nickel Metal Hydride (NiMH)Standard VEX power connectorWARNING: Make sure your charger is capable of charging NiMH Batteries. If using a VEX Charger, the VEX Smart Charger MUST be used to charge this battery! DO NOT use the discontinued VEX Fast Battery Charger to charge...

VEXnet Joystick Power Adapter
Price: $12.99
View
Availability: Temporarily Unavailable
Item #: 276-1701 -

Extend your runtime by powering your VEXnet Joystick directly from a wall outlet. Simply connect this adapter to the VEXnet Joystick's programming port and you're good to go for hours and hours.VEX-276-1701

VEXnet AAA NiMH Rechargeable Battery 6-Pack
Price: $12.99
View
Availability: Temporarily Unavailable
Item #: 276-1696 -

A 6-pack of AAA NiMH Rechargeable Batteries designed for use in the VEXnet Joystick.VEX-276-1696

VEX Robotics Smart Charger Power Cord - North America (Type A)
Price: $3.00
View
Availability: Discontinued
Item #: 276-1500 -

For use with Vex Smart Charger 276-1445VEX-276-1500

VEX Robotics Pneumatics Kit 1 - Single Acting Cylinders
Price: $219.99
View
Availability: Temporarily Unavailable
Item #: 275-0274 -

Kit 1 is a complete pneumatics add-on for the VEX Robotics system. The cylinders are Single Acting, meaning they use air pressure to extend the piston, and an internal spring to allow the piston to retract. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Single Acting cylinder kit (air push, spring return) Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum...

VEX Robotics Pneumatics Kit 1A - Single Acting Cylinder Add-on
Price: $72.99
View
Availability: Temporarily Unavailable
Item #: 275-0275 -

Kit 1A adds one Cylinder (Air Push, Spring Return) to Kit 1 or Kit 2. Cannot be used without Kit 1 or Kit 2. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Single Acting cylinder kit (air push, spring return) Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum Force 54 N (12 lb. force) Cylinder Strokes 45 Strokes from 100 psi to 25 psi Valve Control Connects to...

VEX Robotics Pneumatics Kit 2 - Double Acting Cylinders
Price: $281.99
View
Availability: Temporarily Unavailable
Item #: 275-0276 -

Kit 2 is a complete pneumatics add-on for the VEX Robotics system. The cylinders are Double Acting, meaning they use air pressure to extend and retract the piston. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Double Acting Cylinder Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum Force 54 N (12 lb. force) Cylinder Strokes 45 Strokes from 100 psi to 25 psi...

VEX Robotics Pneumatics Kit 2A - Double Acting Cylinder Add-on
Price: $109.99
View
Availability: Temporarily Unavailable
Item #: 275-0277 -

Kit 2A adds one Cylinder (Bi-directional) to Kit 1 or Kit 2. Cannot be used without Kit 1 or Kit 2. Features Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Double Acting Cylinder Technical Info System Pressure 689 kN/m² (100 psi) Cylinder Bore 10mm (0.394in.) Cylinder Stroke 50mm (1.987in.) Maximum Force 54 N (12 lb. force) Cylinder Strokes 45 Strokes from 100 psi to 25 psi Valve Control Connects to one VEX Controller I/O Port Tank...

VEX Robotics Pneumatics Tubing - 5ft.
Price: $4.95
View
Availability: In Stock
Item #: 275-0447 -

5ft. of Polyurethane Tubing for use with VEX Robotics Pneumatics.Black, 5/32" ODVEX-275-0447

VEX Robotics easyC V2 for PIC Programming Kit
Price: $74.99
View
Availability: Temporarily Unavailable
Item #: 276-2152 -

Program your Vex robot , and use as many of the available accessories as you want (sold separately) to create the ultimate in artificial intelligence! The Programming Kit is software that enables you to write programs on your computer and then download them to your Microcontroller. You can now create custom functions with the ease of a mouse-drag, and you can share your user-defined functions between projects and users with the same ease. The easyC 2.0® graphical interface is great for...

VEX Robotics Programming Hardware Kit
Price: $49.99
View
Availability: Temporarily Unavailable
Item #: 276-2186 -

This kit includes the hardware necessary to use any of the VEX Robotics software.Included parts:(1) Programming Module(1) USB to Serial Cable 6 ft.(1) RJ14 6-pin cable 3 ft. VEX-276-2186

VEX Robotics USB A-A Cable 6
Price: $9.99
View
Availability: Temporarily Unavailable
Item #: 276-1403 -

Cable for connecting VEXnet components to sync and run in tether mode. Works with the VEXnet Upgrade.Works with the VEX Cortex Micro Controller.Works with the VEX ARM9 Micro Controller.Color subject to availability.VEX-276-1403

VEX Robotics Jumper 5-pack
Price: $2.49
View
Availability: In Stock
Item #: 276-1380 -

Used to make changes to the default code. Plug these into the digital I/O port of the microcontroller. An easy method to set programming options.Sold in a 5 pack.Bright orange color is easy to see.VEX-276-1380

VEX Robotics Solenoid Driver Cable 2-pack
Price: $39.99
View
(1)
Availability: Temporarily Unavailable
Item #: 275-1417 -

This Pneumatic Solenoid Driver Cable is this same driver cable that is included in the Pneumatic Kits. On one end of the Driver Cable is the standard 3 wire PWM Connector which connects to a VEX Microcontroller Digital Output. On the other end is the 2 wire Pneumatic Connector which mates directly to the Pneumatic Solenoid. This cable takes the digital On\Off signal and controls the 5V power applied to a pneumatic solenoid. The Pneumatic Solenoid Driver Cable is rated for about 3/4 Amp and is...

VEX Robotics Competition Cortex Wire Retaining Clips
Price: $3.99
View
Availability: In Stock
Item #: 276-2173 -

These wire retaining clips are upgrades for the standard Cortex Microcontroller clips and are designed to secure wires in a competitive robotics environment.(3) clips included.Upgrades, not replacements, for standard Cortex clips.Zip-tie wires into place to ensure secure connections.Zip-ties not included.VEX-276-2173 STEP File

VEX Robotics Cortex Micro Controller
Price: $249.99
View
Availability: Available
Item #: 276-2194 -

The VEX Cortex Microcontroller coordinates the flow of all information and power on the robot. It has built in bi-directional communication for wireless driving, debugging and downloading using the state of the art VEXnet 802.11 wireless link. The Microcontroller is the brain of every VEX robot. Features Built-in VEXnet Technology: Wireless driving, wireless debugging, and wireless downloading Motor Ports: (8) standard 3-wire Motor or Servo ports. (2) 2-wire Motor ports I2C Smart Sensor Port:...

VEX Robotics 6in. RC Extension Cable 2-Pin (pack of 4)
Price: $7.99
View
Availability: Temporarily Unavailable
Item #: 276-1433 -

Extension cables are used to extend the length of a 2-wire cable such that a motor or motor controller can be farther from a VEX Microcontroller.Extension cables compatible with:2-Wire Motor 269 or 393Motor Controller 29Comes in a pack of 4 cables.0-276-1433