Products 49-72 of 175
Show
VEX Robotics 2000mAh 7.2V NiMH Robot Battery
Price: $19.99
View
Availability: Temporarily Unavailable
Item #: 276-1456 -

The VEX 7.2V Nickel Metal Hydride Battery provides a rechargeable power source for use with your VEX robots. It has the same capacity of the VEX 7.2V NiCad battery with a smaller footprint.Capacity: 2000 mAhRechargeable Nickel Metal Hydride (NiMH)Standard VEX power connectorWARNING: Make sure your charger is capable of charging NiMH Batteries. If using a VEX Charger, the VEX Smart Charger MUST be used to charge this battery! DO NOT use the discontinued VEX Fast Battery Charger to charge NiMH...

VEX Robotics Power Expander
Price: $49.99
View
Availability: Temporarily Unavailable
Item #: 276-2271 -

Use the VEX Power Expander to add a secondary power source for four of the PWM outputs on the VEX Microcontroller. Balance a robot's motor load across two batteries to extend robot run time and increase performance.FeaturesAttach a 2nd battery to your robotPower up to four (4) Motors or ServosReduce motor load on primary batteryRun your robot for longer!Protected by an Internal Circuit BreakerStatus port provides feedback to MicrocontrollerMonitor when your robot trips its breakerMonitor...

VEX Robotics Performance Tool Kit
Price: $39.99
View
Availability: Temporarily Unavailable
Item #: 276-1645 -

A group of performance tools that make working on your VEX Robot easier. Included wrenches fit VEX screws and shaft collars.Included(5) 5/64" T-Handle Hex Driver(5) 3/32" T-Handle Hex Driver(5) 3/32" Ball-End Hex Screwdriver VEX-276-1645

VEX Robotics 3/32in. Hex Key 8-pack
Price: $5.25
View
Availability: Temporarily Unavailable
Item #: 275-1030 -

High Strength Hex Key 3/32" for the serious VEX builder. Made from high strength tempered steel. Fits the 8-32 screws.VEX-275-1030

VEX Robotics 5/64in. Allen Wrench 8-pack
Price: $5.25
View
Availability: Temporarily Unavailable
Item #: 275-1031 -

High Strength Allen Wrench 5/64in. for the serious VEX builder. Fits the 6-32 screws and shaft collars. Made from high strength tempered steel.VEX-275-1031

VEX Robotics VEXnet System Bundle
Price: $399.99
View
Availability: Temporarily Unavailable
Item #: 276-1604 -

The VEXnet System Bundle contains everything you need to get started controlling a VEX robot using the VEX Cortex Micro Controller. Bundle Contents: (1) VEX Cortex Microcontroller (1) VEXnet Joystick (2) VEXnet USB Adapter Keys (1) VEXnet Backup Battery Holder (1) USB A-A Cable The VEX Cortex Micro Controller coordinates the flow of all information and power on the robot. It has built in bi-directional communication for wireless driving, debugging and downloading using the state of the art...

VEX Robotics VEXnet Backup Battery Holder
Price: $9.99
View
Availability: Temporarily Unavailable
Item #: 276-2243 -

The VEXnet Backup Battery allows you to mount and connect a 9V battery. This battery keeps VEXnet alive when the main battery fails.VEX-276-2243

VEX Robotics Coiled Handset Cable
Price: $6.99
View
Availability: In Stock
Item #: 276-1602 -

Put your robot on tether and start testing. At VEX Competitions, you can not test your robot on the Practice Fields unless you have a Tether Cable - no crystal operations are allowed.Connects the 75 MHz Transmitter to the Microcontroller18" long unextended. 12' long stretchedNo crystals neededVEX-276-1602

VEX Robotics LCD Display
Price: $49.99
View
Availability: In Stock
Item #: 276-2273 -

Use the VEX LCD Display to receive real-time feedback from your robot to perform live debugging. View multiple stored program configurations and select between them or provide additional user-input to your robot.Note: Requires VEX programming software and cables that are both sold separately.I/O Ports: 1 RX Port & 1 TX Port Microcontroller CompatibilityPIC Microcontroller V0.5: Requires (2) 3-Wire Extension CablesCortex Microcontroller: Requires (1) 4-Wire to dual 3-Wire CableCables are sold...

VEX Robotics Advanced Sensor Kit
Price: $99.99
View
Availability: Temporarily Unavailable
Item #: 275-1179 -

The VEX Advanced Sensor Kit provides a complete mix of the most popular sensors in a value bundle. Increase the challenge, and your robot's abilities, by adding a computer engineering and sensor implementation aspect to the robotics lab. Included Sensor Kits Line Tracking KitProgram your robot to follow a black line over a white surface. This kit provides more design flexibility--you can also use it to program your robot for light sensing. A Programming Kit is needed to change the program in...

VEX Robotics Analog Accelerometer
Price: $39.99
View
Availability: In Stock
Item #: 276-2332 -

The VEX Accelerometer measures accelerations on three axis simultaneously. By measuring the acceleration of the robot, one can calculate the velocity of the robot, and more importantly the distance this robot has travelled. Accelerometers are also great for detecting collisions and determining if the robot is stopped or moving.The LIS344ALH capacitive micromachined accelerometer features signal conditioning, a 1-pole low pass filter, temperature compensation and g Select which allows for the...

VEX Robotics Jumper 5-pack
Price: $2.49
View
Availability: In Stock
Item #: 276-1380 -

Used to make changes to the default code. Plug these into the digital I/O port of the microcontroller. An easy method to set programming options.Sold in a 5 pack.Bright orange color is easy to see.VEX-276-1380

VEX Robotics LED Indicator Pack
Price: $9.99
View
Availability: In Stock
Item #: 276-2176 -

Compatible with VEX 2.0 and VEX Pro Digital Outputs. Use these for feedback indicators, to debug code, verify Microcontroller mode, or for cool light patterns. Connect to the VEX Microcontroller Analog / Digital Ports when configured as a Digital Output. Set the line low to turn the LED On and set the line high to turn Off the LED. Inputs: +5VOutputs: GND(3) Red LED Indicators(3) Green LED Indicators(2) Yellow LED IndicatorsVEX-276-2176

VEX Robotics Solenoid Driver Cable 2-pack
Price: $39.99
View
(1)
Availability: Temporarily Unavailable
Item #: 275-1417 -

This Pneumatic Solenoid Driver Cable is this same driver cable that is included in the Pneumatic Kits. On one end of the Driver Cable is the standard 3 wire PWM Connector which connects to a VEX Microcontroller Digital Output. On the other end is the 2 wire Pneumatic Connector which mates directly to the Pneumatic Solenoid. This cable takes the digital On\Off signal and controls the 5V power applied to a pneumatic solenoid. The Pneumatic Solenoid Driver Cable is rated for about 3/4 Amp and is...

VEX Robotics Drive Shaft Bar Lock, 8-pack
Price: $7.49
View
Availability: In Stock
Item #: 275-1065 -

Metal version of the shaft locking part. Three locations for square shafts. Made from cold rolled steel, 0.046" thick, zinc plated. Technical Info Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Material Thickness 0.046" (1.17mm) Material Finish Zinc Plated Hole Size (2) 0.182 square (Vex standard) (3) 0.125 square (Mates with Drive Shafts) VEX-275-1065 STEP File ...

VEX Robotics Aluminum Structure Kit
Price: $79.99
View
Availability: In Stock
Item #: 275-1097 -

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong. Features Compatible with all VEX Motion and Structure components. Available in bundle kits or in single part multi-packs Technical Specs Material Type Aluminum, 5052H32 Material Thickness 0.064in (1.6mm) Hole Size 0.182 square (Vex standard) Kit Contents (1) Aluminum Chassis 25x25x2 (4) Aluminum C-Channel 1x2x1x25 (1) Aluminum C-Channel 1x5x1x25 (2) Aluminum Plate 5x25 (4) Aluminum Bar...

VEX Robotics Booster Kit
Price: $185.99
View
Availability: Temporarily Unavailable
Item #: 276-2232 -

If you are a hardcore VEX builder, this is the kit you're going to want. The VEX Booster Kit contains over 600 pieces of VEX Structual and Motion Components. Use the parts in the Booster Kit with the Protobot Robot Kit to build bigger and better robots. This kit includes pieces specifically recommended by VEX builders to maximize versatility. Kit contents Steel Chassis Collars, Shafts, and Bearings (2) Chassis Bumper 2x2x25 holes (16) Shaft Collar (4) Chassis Rail 2x1x25 holes (4) Shaft 11mm...

VEX Robotics Long Aluminum Structure Kit
Price: $79.99
View
Availability: In Stock
Item #: 275-1410 -

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong. Features Compatible with all VEX Motion and Structure components. Available in bundle kits or in single part multi-packs Technical Specs Material Type Aluminum, 5052H32 Material Thickness 0.064in (1.6mm) Hole Size 0.182 square (Vex standard) Kit Contents (4) Aluminum C-Channel 1x2x1x35 (4) Aluminum C-Channel 1x5x1x35 (4) Aluminum Angles 2x2x35 Weight Aluminum C-Channel 1x2x1x35: 0.157...

VEX Robotics Steel Plate 15x5, 2-pack
Price: $4.99
View
Availability: In Stock
Item #: 275-2023 -

Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Technical Specs Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Material Thickness 0.046" (1.17mm) Material Finish Zinc Plated Hole Size 0.182 square (Vex standard) Weight 0.134 lbs VEX-275-2023 STEP file ...

VEX Robotics Base Plate 30x15, 2-pack
Price: $29.99
View
Availability: Temporarily Unavailable
Item #: 276-1341 -

VEX Base Plates are designed to serve as a foundation for a variety of robotics applications. Use them to create a large stationary robotic arm, or interlock them to build larger manufacturing type systems. These pieces can also be used as large structural pieces in other robotic applications. Technical Specs Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Hole Size 0.182 square (Vex standard) Size 15-holes Wide x 30-holes Long 7.5 x 15 x 0.546in....

VEX Robotics Steel Angles 2x2x35, 4-pack
Price: $17.99
View
Availability: Discontinued
Item #: 275-1143 -

VEX angle without slots. Typically used for structural framing. Good strength on two axis. Can be cut on 0.500" increments. Technical Specs Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Material Thickness 0.046" (1.17mm) Material Finish Zinc Plated Hole Size 0.182 square (Vex standard) Weight 0.353 lbs VEX-275-1143 STEP file ...

VEX Robotics Steel Angles 3x3x35, 4-pack
Price: $19.99
View
Availability: Temporarily Unavailable
Item #: 275-1144 -

VEX angle without slots. Typically used for structural framing. Good strength on two axis. Can be cut on 0.500" increments. Technical Specs Material Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Material Thickness 0.046" (1.17mm) Material Finish Zinc Plated Hole Size 0.182 square (Vex standard) Weight 0.516 lbs VEX-275-1144 STEP file ...

VEX Robotics Metal C-Channel 1x5x1x25 Holes, 4-pack
Price: $17.99
View
Availability: Discontinued
Item #: 275-1138 -

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance. Can be cut on 2.500" increments. Made from cold rolled steel, 0.046" thick, zinc plated. Includes four (4) lengths. Technical Info Metal Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Metal Thickness 0.046in. Finish Zinc Plated Hole Size 0.182 square (VEX standard) Cuttable Each channel is segmented into cuttable...

VEX Robotics Metal C-Channel 1x5x1x35 Holes, 4-pack
Price: $19.99
View
Availability: In Stock
Item #: 275-1139 -

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance. Can be cut on 2.500" increments. Made from cold rolled steel, 0.046" thick, zinc plated. Includes four (4) lengths. Technical Info Metal Type Cold Rolled Steel per ASTM A-1008 CS Type B (approx 40ksi tensile strength) Metal Thickness 0.046in. Finish Zinc Plated Hole Size 0.182 square (VEX standard) Cuttable Each channel is segmented into cuttable...