Products 1-24 of 111
Item #: RPM80322 -
5.9 x 3.6 x 0.6 in.0VA-RPM80322
Item #: RPM70045 -
RPM provides Monster GT owners with greater strength and durability with their new nylon A-arms. Key Features• Oversized hinge pin boss areas• Underarm rib supports• Re-engineered designs• Droop stops to prevent shock blowouts• Also available in black and dyeable white 0VA-RPM70045
Item #: RPM70752 -
These are the optional RPM Black Plastic Rear A-Armsfor the Associated RC10GT.FEATURESBlack in ColorPlastic Constrution2 holes for mounting shocksINCLUDES(2) Rear A-Arms(2) 3x5.6mm phillips round head screwsREQUIREMENTSInstallation onto the Team Associated RC10GTSPECIFICATIONSLength: 3.895" (99mm)Width: 1.475" (37.5mm)Thickness: 0.31" (7.9mm)0-RPM70752
Availability: In Stock
Item #: RPM70762 -
RPM GT2 A-arms were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. Their GT2 front A-arms are designed to withstand some serious abuse! They've redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a larger area at the inner hinge pin mounts. RPM front A-arms are wider at the inner hinge pin mounts by nearly 3/16" without altering suspension geometry.RPM also focused on the...
Item #: RPM80382 -
Rear Bearing Carriers0-RPM80382
Item #: RPM80245 -
FRT A-ARM - SLASH, RUSTLER, STAMPEDE, NITRO SLASH (BLUE) (Set of 2)0-RPM80245
Item #: RPM80372 -
Front Bearing Carriers0-RPM80372
Item #: RPM80852 -
RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this vital suspension component. Our design uses an I-beam structure that adds tremendous levels of strength and rigidity that is far superior to u-shaped or flat designs. Our front shock towers will not flex nearly as easily as the stock versions yet...
Item #: RPM80832 -
RR SHOCK TOWER SLASH/RUSTLER/STAMPEDE/BANDIT0-RPM80832
Item #: RPMC8462 -
These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.Optional Arms that replace the stock.FEATURESBlack in colorPlastic constructionINCLUDES(1) Upper Arm(1) Lower Arm(2) RPM DecalsREQUIREMENTSInstallation, NOTE-four packages are required to replace all A-armsSPECIFICATIONSLength: 5" (127mm)Width: 3-1/8" (79mm)Thickness: 0.33" (8.4mm)0-RPM80462
Item #: RPM80595 -
RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash – they are not multi-platform A-arms like the stock versions.Our first design challenge was to beef up our version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! We then eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the...
Item #: RPMC8182 -
RR A-ARM BLK E-RUSTLER/STAMPEDE0-RPMC8182
Item #: RPMC8245 -
This is a pair of optional Front A-Arms for the TraxxasElectric Stampede and Rustler.FEATURESComposite nylon construction, black in colorDirect fit hop-up requires no model modification for installationINCLUDESTwo Front A-ArmsREQUIREMENTSInstallation following the model manualSPECIFICATIONSLength: 3.31" (84mm)Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest0-RPMC8245
Item #: RPMC8237 -
Item #: RPMC8495 -
These are the optional A-Arms (Supension Arms) for the Traxxas Nitro RustlerThese mount to the bulkhead and the hubs mount to it.FEATURESHeavy Duty Nylon ConstructionBlue in ColorTwo Pre-Drilled Shock Mounting PositionsFor the Front of the Nitro RustlerINCLUDESTwo Front Blue A-ArmsTwo 3mm x 18mm Machine Thread Socket Head Cap ScrewsOne RPM Decal Sheet w/ Two RPM LogosREQUIREMENTSAssembly onto Vehicle.SPECIFICATIONSLength: 3.1" (79mm)Width at Bulkhead: 1.5" (38mm)Width at Hub: 1.09"...
Item #: RPMC8535 -
These are the optional A-Arms (Supension Arms) for the Traxxas Nitro RustlerThese mount to the bulkhead and the hubs mount to it.FEATURESHeavy Duty Nylon ConstructionBlue in ColorOne Pre-Drilled Shock Mounting PositionsFor the Rear of the Nitro RustlerINCLUDESTwo Rear Blue A-ArmsOne RPM Decal Sheet w/ Two RPM LogosREQUIREMENTSAssembly onto Vehicle.SPECIFICATIONSLength: 3.6" (91mm)Width at Bulkhead: 1.8" (45mm)Width at Hub: 1.15" (29mm)Thickness: .31" (7.8mm)0-RPMC8535 ...
Item #: RPMC8692 -
BLACK FR UP/LOW A-ARMS 1/16 EREVO0-RPMC8692
Item #: RPMC8083 -
This is the optional RPM Rear Shock Tower for the Traxxas Nitro Rustler, Nitro Stampede and Nitro Sport.FEATURESSturdy nylon reinforced plastic constructionUses all stock hardware (for mounting shocks etc.)INCLUDESOne rear shock towerSPECIFICATIONSWidth: 4.33" (110mm)Height: 2.75" (70mm)Thickness: 7mm0-RPMC8083
Item #: RPMC8882 -
Availability: In Stock
Item #: RPMC8009 -
Item #: RPMC8119 -
This is a Blue Wide Front Bumperfor the Traxxas Rustler, Stampede and Bandit.The Bumper goes on the Front of the Vehicle and Protects the Chassis.FEATURESDurable plastic constructionFits both nitro and electric versions of the Rustler and StampedeINCLUDESOne BumperOne Team RPM DecalREQUIREMENTSInstallation onto the Traxxas Rustler, Stampede or BanditSPECIFICATIONSLength: 2-3/4" (70mm)Width: 6-1/4" (159mm)0-RPMC8119 ...
Item #: RPM70492 -
For use on most 1/10 scale rc vehiclesTech Note: RPM recommends using the Toe-In Gauge on any 1/10th scale sedans, buggies, and trucks using 2.2" wheels or smallerSerious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durabilityBacked by RPM's world-renowned breakage warrantyRPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the United StatesIf you are a hobbyist that enjoys R/C...
Item #: RPM70742 -
SC10 / T4 REAR A-ARMS BLACK0-RPM70742
Availability: In Stock
Item #: RPM70950 -
RPM has combined the most popular genre of R/C - Monster Trucks - with one of the most popular RPM products ever released - the #70992 Precision Camber Gauge. Our Monster Camber Gauge is capable of measuring the camber angle on tires up to 6.5 inches (165mm) and taller (depending upon the belly height of the tire) and as small as 2 inches (51mm) in diameter. The Monster Camber Gauge shares all of the same characteristics of its smaller brother - camber accuracy to within 1/2 degree, ease of...