IFI-V884

IFI VEX Pro Victor 884

<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">The Victor 884 is a speed controller specifically engineered for robotic applications.

The 40A capacity, low voltage drop, and peak surge capacity make the Victor

884 ideal for drive systems while its braking options and precise control meet

the demanding needs of arms and lift systems.</font></p>

<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">The Victor 884 is an improved version of our Victor 883 speed controller.

The 884 has greater control of arms, mechanisms, and feed-back loops. The Victor

884 provides output control from 3% to 100%. The Victor 883 has output control

from 10% to 100%.</font></p>

<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">The Victor 884 has a deadband with respect to the PWM signal, which is approximately

117 to 137 (127 center). Any PWM signal within the deadband results in no output

(neutral). The PWM deadband accommodates joysticks that do not return to the

exact same center. The PWM deadband effect can be overridden by Robot Controller

code if needed. NOTE: It is REQUIRED that you use a PWM Signal Driver if you are not using

an IFI RC unit.</font></p>

<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">This

unit is compatible with standard R/C equipment only when using the <a href="IFIW-SIG36.html" target="_top">PWM

Signal Driver</a>. We do not include any cables when shipping this unit, be certain you have your own signal boosters or complete IFI control system.</font></p>

<table width="80%" border="1" align="center" cellpadding="1" cellspacing="0" bordercolor="#666666">

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Control Signal

<br>

Standard <br>

</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">R/C Type PWM

(Pulse Width Modulation) single-channel </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Operating

Voltage </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">6V

to 15V </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Maximum Current

<br>

</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">40A continuous

</font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Power Connector

Type <br>

</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">6-32 Screw Terminals (Maximum Screw Torque - 5 in*lbs)

</font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Signal Connector

Type <br>

</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Use a standard

non-shrouded PWM cable (3 wires) </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Typical Application

</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Power one motor

with variable speed forward, reverse, or off </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Weight </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">0.25 lbs (4 oz)</font></td>

</tr>

</table>

<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Please note that the Victor controllers do not include a BEC. Receivers will need a different power source. </font></p>