Item #: MPUA2260
UPC: 4041033082607
Price: $125.00
    Points to Purchase: 17858
    Availability: Available
    Usually ships In 3-9 business days (sooner, if drop-shipped)

    This is a radio controlled, electric powered, foam construction
    Multiplex Easy Star II Airplane Model Kit
    For Beginner to Intermediate Modeler/Fliers.

    Construction: Elapor foam on the fuselage, wing and tail section
    Wings: Two-piece, foam construction, white in color, may be built
    with optional ailerons
    Radio Compartment: Foam, sized for high capacity LiPo packs
    Landing Gear: No landing gear, model lands on its belly
    Hardware: Pushrods and other hardware included
    Spinner: White plastic 1.4" (35mm)
    Propeller: Plastic, folding pusher type, pro faces the rear of the
    Decals: Precut colorful Easy Star II logo decals

    Foam fuselage, wings, and tail section, prop, spinner, decals,
    instruction manual, and hardware

    Radio: 3-channel
    Servos: Two nano (rudder, and elevator control), two extra servos are
    required if building with ailerons
    Servo Extensions: Two 12" (305mm)
    Motor: 28mm brushless outrunner with at least 200W output
    ESC: Brushless compatible, to match selected motor
    Battery: 3S 1500-2500mAh LiPo
    Battery Charger: To match selected LiPo battery
    LiPo charge bag and miscellaneous building equipment

    Wingspan: 54" (1370mm)
    Wing Area: 435 sq in (2810 sq dm)
    Wing Loading: 8.28 oz/sq ft (25.27 g/sq dm)
    Weight: 25 oz (709 g)
    Length: 38.5" (978mm)
    Airfoil: Flat bottom, high wing configuration
    Center of Gravity: 3.07" (78mm) back from the wing's leading edge
    at the fuselage sides.
    Control Throws-
    Elevator: 0.20" (5mm) up, 0.16" (4mm) down
    Rudder: Right & Left 0.39" (10mm)

    This model is NOT made from polystyrene foam. For this reason, it is
    not possible to use white glue or epoxy glue. Use only a medium CA
    (CA+) glue and activator. Do not use CA glue designed for polysty-
    rene foam.