Stop spending so much time charging, and spend more time flying! With the Micro-6 you can charge up to six Ultra Micro lipos at one time!
The Micro-6 allows you to use any lithium battery charger that supports 1S (3.7V) Lithium batteries via a standard JST connector to charge Ultra Micro lipos.
Designed for use with Ultra Micro lipos utilizing the Parkzone/E-flite Blade mCX-style micro connector.
Compatible with batteries used in the ParkZone Vapor, Ember/2, Sukhoi, P-51, and J-3 Cub as well as E-flite's Blade mCX, S300, MSR, Tandem Rescue and Ultra-Micro 4-Site.
Don't have a charger that supports charging via a JST connector? Click here to pick up one of our handy Octopus charging adapters!
HOW THE MICRO-6 WORKS
This adapter is designed to allow you to connect Ultra Micro 1-cell batteries via a JST connector to the LiPo charger of your choice.
The adapter simply allows you to connect up to 6 batteries in parallel so that you can charge them as a single larger mA single cell battery (i.e. 1s6p). The only requirement is that all the batteries be reasonably close in charge level. For example, if you either time your flights or fly till cutoff. You want to avoid connecting a fully charged battery to a group of discharged cells, since a rapid rush of current would occur.
As you plug in the batteries they will be tied together and will self balance. Then connect the JST connector to your existing charger that supports 1 cell (1s) charging and set the charge mA to the sum total of the mAh rating for each cell.
Want to do more than 6 batteries? No problem, get a second or third adapter and connect with a parallel Y adapter and charge up to 12, 18 or more! You are limited only by your chargers current capabilities.