Item #: GPMA1130
UPC: 735557011307
Retail: $69.99
Price: $56.99
You Save: $13.00 (18.6%)
    Points to Purchase: 8142
    Availability: Available
    Usually ships In 3-9 business days (sooner, if drop-shipped)

    Quantity:
    This is the electric powered, radio controlled, almost ready to fly
    ElectriFly by Great Planes Pluma 3D Biplane.
    Park Pilot Program Legal Aircraft
    For Intermediate Modeler/Pilots.
    Can be flown indoors or outdoors.

    FEATURES
    Construction: Lightweight 0.12" (3mm) extruded polystyrene Pro-
    Formance foam-an ElectriFly exclusive, tabbed and interlocking for
    fast assembly and correct alignment, pre-applied graphics are
    lighter weight than paint
    all flying surfaces (except rudder) pre-hinged with genuine 3M
    Blenderm tape which is durable and feather light
    Wings: Both sections with ailerons, speed brakes install between
    aileron link rods if desired
    Aileron Control: Single servo
    Landing Gear: Carbon rod with factory bent wire ends
    Hardware: Carbon fiber and laser cut
    Building Time: Ready to fly in about one hour
    Warranty: Great Planes Model Manufacturing Company guarantees this
    kit to be free from defects in both materials and workmanship at
    the date of purchase.

    INCLUDES
    ElectriFly by Great Planes Pluma 3D Biplane, instruction manual,
    decal sheet, landing gear with two 1" (26mm) diameter plastic
    wheels

    REQUIREMENTS
    Radio: 4 channel with micro receiver
    Servos: Three micro high torque (1-rudder, 1-elevator, 1-aileron)
    Battery Charger: LiPo compatible
    For Indoor Flight-
    Motor: Rimfire Outrunner Brushless 28-22-1380, GPMG4505
    ESC: Silver Series For Brushless Motors 8A, GPMM1800
    Battery: Power Series 11.1V 300mAh Balanced 18C LiPo Pack
    Propeller: 8x4 thin prop, GWSQ2009
    For Outdoor Flight-
    Motor: Rimfire Outrunner Brushless 28-26-1000, GPMG4525
    ESC: Silver Series For Brushless Motors 12A, GPMM1810
    Battery: BP Series 11.1V 640mAh Balanced 15C LiPo Pack
    Propeller: 10x4.7 Slow Flyer, APCQ5015

    SPECIFICATIONS
    Wingspan: 32.5" (830mm)
    Wing Area: 518 sq in (33.4 sq dm)
    Weight: 8.4 - 9.5oz (240 - 270g)
    Wing Loading: 2.3 -2.6oz/sq ft (7.2 - 8.1g/sq dm)
    Length: 38" (955mm)
    Center of Gravity:
    Indoor Flying, 2-5/8" (67mm) from the leading edge of upper wing
    Outdoor Flying, 2-1/2" (63mm) from the leading edge of upper wing
    Total C.G. range is from 1-3/4" (44mm) forward to 3-5/16"
    (85mm) aft. Do not fly outside of this range
    Control Throws-
    Low Rate High Rate 3D Rate
    Elevator: 1" (25mm) 17° 1-3/8" (35mm) 26° 2-1/8" (55mm) 46°
    Rudder: 1-9/16" (40mm) 19° 2-3/4" (70mm) 36° 3-7/8" (100mm) 56°
    Ailerons: 1-9/16" (40mm) 27° 2-3/8" (60mm) 43° 2-7/8" (75mm) 58°

    0-GPMA1130