Item #: FUTK6000
UPC: 4513886206092
Retail: $219.99
Price: $189.99
You Save: $30.00 (13.6%)
    Points to Purchase: 27142
    Availability: Available
    Usually ships In 3-9 business days (sooner, if drop-shipped)

    Quantity:
    This is the Futaba 6J 6-Channel 2.4GHz S-FHSS and FHSS Selectable Mode Radio System.
    This version does not include servos.
    The 6J transmitter is "full range".
    Only available in Mode 2.

    FEATURES
    Selectable S-FHSS and FHSS modes, the included R2006GS receiver
    automatically adapts to the selected mode
    Capable of 4 channels only in FHSS mode
    Fail safe on all channels in S-FHSS mode only (throttle channel only
    when FHSS mode is selected)
    15 model memory with 4 character model naming
    40x40 127 segment LCD display
    Modes 1-4 selectable by pilot
    R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link
    circuitry, frequency hopping, spread spectrum design and Dual
    Antenna Diversity
    Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
    Throttle position, mix and low battery warnings
    Trainer system (trainer cord not included)
    purchase
    Airplane Features;
    Two programmable mixes and two 5-point throttle curves
    Two 5-point pitch curves
    Flaperon with differential rate
    Flap trim (2 rates)
    V-tail mixing
    Elevon mixing
    Helicopter Features;
    Two 5-point throttle curves
    Three 5-point pitch curves
    Throttle hold
    Hover pitch
    Gyro and revo mixing
    Four swash plate types (H1, H3, HR3 & H3 w/AFR)
    Swash AFR (ail/ele/pitch)
    Throttle mix
    Electronic swash ring
    Throttle and pitch delay

    INCLUDES
    Futaba 6J 6-Channel Transmitter, R2006GS Receiver, Instruction
    Manual, Neckstrap and Smooth Ratchet Plate for Heli Throttle

    REQUIREMENTS
    AA Cells: Four for transmitter
    Servos of modeler's choice
    Receiver battery

    SPECIFICATIONS
    Transmitter;
    Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
    Frame Rate: 6.8ms
    Current Drain: 170mA
    Receiver;
    Modes: FHSS or S-FHSS (auto selectable)
    Power Requirements: 4.8V-7.4V
    Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
    Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
    Weight: 0.29oz (8.3g)
    Current Drain: 80mA (@ no signal)

    0-FUTK6000