Item #: EFLA1080
UPC: 605482026755
Retail: $139.99
Price: $99.99
You Save: $40.00 (28.6%)
    Points to Purchase: 14285
    Availability: Available
    Usually ships In 3-9 business days (sooner, if drop-shipped)

    Quantity:
    When performance matters in your high-current applications, look no further than the E-flite® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a ‘pro series' electronic speed control.

    This product is not intended for use by children under 14 years of age without direct adult supervision.

    Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
    5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
    Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
    3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
    Programmable motor braking
    Safe power-arm mode prevents accidental starts
    Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
    Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
    Programmable soft start-up rate - .25 second or 1 second
    Auto motor shut down if signal is lost or there is interference
    Programmable timing5 user-selectable ranges–use with a large variety of brushless motors
    Two operating modes–Airplane or Heli
    Pre-wired connectorsE-flite EC5 on battery input and 4.0mm female gold bullets on motor output leads
    NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060A)

    Specifications
    Forward: Yes
    Brake: Yes
    Time Delay Brake: Yes
    Continuous Maximum Current: 80A
    Input Connector Types: EC5, 10AWG
    Output Connector Types: 4mm gold bullet, 12AWG
    Momentary Peak Current: 100A (15 seconds) Proper Cooling Required
    Length: 3.0 in (77mm)
    Width: 1.6 in (41mm)
    Height: 0.62 in (15.5mm)
    Weight: 3.75 oz (106 g)
    BEC Voltage: 5.5 Volt switch-mode
    Overload Protection: Yes
    Wire Gauge: 10 awg input leads; 12 awg output leads
    Cells w/BEC: 9- to 18-cell Ni-MH, 3–6S Li-Po
    Auto Cutoff: Yes

    0-EFLA1080