Item #: EFL2250
UPC: 605482773789
Retail: $164.99
Price: $119.99
You Save: $45.00 (27.3%)
    Points to Purchase: 17142
    Availability: Available
    Usually ships In 3-9 business days (sooner, if drop-shipped)

    Quantity:
    Key Features
    • Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
    • Design based on Hangar 9’s popular line of Ultra Sticks
    • Lightweight balsa and ply construction
    • Covered in genuine Hangar 9 UltraCote
    • Two firewall options let you use a wide variety of motor sizes, types and brands
    Includes molded firewall stick mount
    Optional quad-flap configuration
    Tough, lightweight aluminum landing gear that’s pre-assembled and tall enough to accommodate larger prop sizes
    95% pre-built—get flying in 2 hours or less
    Control surfaces have pre-installed hinges and control horns
    Bolt-on tail requires no gluing and secures with two lock nuts
    Great match for E-flite Park 450 Outrunner Brushless Motor
    Easy access top battery hatch

    Overview
    Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

    Wing Span38.75 in (985mm)
    Overall Length34 in (865mm)
    Wing Area325 sq in (21 sq dm)
    Flying Weight22 - 25 oz (625 - 710g)
    Motor SizePark 400 Inrunner or Park 450 Outrunner
    Radio4-channel or greater (7-channel for quad flaps)
    Servos4 sub-micros (6 sub-micros for quad flaps)
    Trim Scheme ColorsUltraCote Fluourescent Blue, Flame Red, Transparent Red & White
    CG (center of gravity)2.25 in (57mm) behind the leading edge
    Prop Size10x7 - 11x7
    Hardware IncludedYes
    Speed Control20A Brushless
    Recommended Battery2100 mAh 3-Cell 11.1V Li-Po
    FlapsYes (optional)
    Control Throw (Ailerons)1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
    Control Throw (Elevator)9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
    Control Throw (Rudder)7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
    Approx. Flying Duration10-20 minutes
    ScalePark Flyer
    Approx. Assembly Time1-2 hours
    Gear Ratio6.5:1 when using Park 400 Brushless Inrunner

    Needed to Complete
    Brushless Motor
    Brushless ESC
    4+ Ch Radio
    4 Sub-micro Servos
    Servo Extensions & Y-harness
    4 to 6-Ch Receiver
    Li-Po Battery
    Li-Po Charger
    CA

    Propeller

    Looking for parts and accessories? Check out the Mini Ultra Stick accessories page!

    0V-EFL2250


    Manual

    Video