Item #: ARAM2000
UPC: 5052127022415
Price: $119.99
    Points to Purchase: 17142
    Availability: Back Order

    ETA Date: 9/7/2018
    This is the Arrma BLX185 6S 150A Electronic Speed Control.

    Can be powered by 3S, 4S, OR 6S (11.1V, 14.8V, OR 22.2V) LiPo
    with loop connector
    35C 5000mAh minimum requirement
    6.0V/3A continuous output, 12A max
    Bridge connector for using single 4S OR 6S battery (5S is not
    Over voltage and overheat protection
    Two stage LiPo cutoff, single stage NiMH cutoff
    Temperature protection mode if ESC temperature exceeds 221°F
    Integrated cooling fan to reduce heat during extreme running
    Waterproof under normal usage
    Integrated hold down tabs easily secure inside vehicle chassis
    Set up from factory to default to a LiPo battery mode, settings can
    changed, see
    COMMENTS below;

    BLX185 6S ESC with Cooling Fan, two Amass XT90 Battery Connectors
    with 10AWG Wires, Receiver Plug, Power Switch and Set Button
    10AWG Motor Wires with 4mm Diameter Gold Plated Female Connectors,
    Instructions and Bridge Connector

    Motor such as the Arrma BLX 2050Kv 6S Brushless Motor

    Length: 2.26" (57.5mm)
    Width: 2.34" (59.5mm) including hold down tabs
    Height: 1.53" (38.9mm)
    Weight: 6.9oz (196g)
    Switch Length: 1.15" (29.3mm)
    Switch Width: 0.5" (12.8mm)
    Switch Height: 0.71" (18mm)
    Receiver Wire Length: 7.87" (200mm)
    Battery Wire Length: 6.5" (165mm)
    Motor Wire Length: 5.12" (130mm) including connector
    Motor Limit: 3000kV
    Wire Size: 10AWG
    Motor Connectors: Gold bullet
    Battery Connectors: Two Amass XT90
    BEC Voltage: 6.0V
    BEC Current Minimum Continuous: 3A
    BEC Current Max Burst: 12A
    Low Voltage Cutoff: 3.2V
    Over Voltage Protection: Over 6S LiPo (22.2V)
    Continouous Amp Rating: 150A
    Throttle Mode: FWD/BRAKE/REV
    Throttle Setup: Manual via pushbutton
    User Programmable: Yes, via button only
    Battery Mode: LiPo/NiMH, default LiPo mode