The new V.2 UAR now features rear wiring to store a much larger battery in the stock and a thicker and larger removable butt plate to extend the battery storage compartment allowing use of a wider range of batteries.
Another improvement made to the V.2 UAR is a modified magazine well to expand magazine compatibility to a greater number of high cap and mid cap magazines as well as an improved and more ergonomic magazine release.
Finally the gearbox has been improved upon for more consistent feeding and cycling during rapid fire thanks to the newly revised air nozzle as well as proper reinforcement to allow the gun to run smoothly on LiPo batteries.
Three Magazine Release button
Unlike the traditional SMG, the UAR has three magazine release buttons. Two buttons are located at the front part of the gun parallel to each other and the other button located next to the magazine housing at the back. Three magazine release buttons allow users to release the magazine in different tactical situation.
Mirror design for both left and right handed users
Magazine Release button is located on both the left and right sides of the gun. The cocking handle has quick detach function allowing users to place the handle on either left or right. Users can operate this gun easily no matter if they are left handed or right handed.
Adjustable Hop Up and functional bolt release catch
Similar to APS ASR Series, the bolt can be locked backward which allows the user to adjust the Hop Up easily. After adjustment, users can simply press down the bolt release button located on the top of the butt stock to release the bolt back to its original position.
The UAR standard comes with 4 side rails. The top and side rails allows players to add lights, scopes, red dots and much more
The UAR comes equipped with a dynamic trigger, ergonomic pistol grip with room to place two 123A batteries. A modified magazine housing allows a user to perform fast reloads without any trouble. The design of the bigger trigger guard is also extremely helpful when a player is wearing gloves.
The UAR uses APS V3 Hybrid gearbox. With its bullpup design, the UAR is a medium size CQC airsoft gun with a long 385mm inner barrel.
Easy Assembling and dissembling
One of the greatest features of the UAR is it's special design where no tools are required when assembling and dissembling. A user can simply disassemble the gun by removing 3 main pins on the lower receiver. The unused main pin can be inserted on the top rail. No tools are required and users can reassemble the UAR in less than 60 seconds.
Hop Up Chamber
For the internals APS has equipped the UAR with a genuine hop up chamber, which is rarely found in other AEGs. The standard velocity of the UAR is 350 FPS which is easily upgradable by changing the main spring. The main spring can easily be changed with the UAR's quick detach feature found on the hybrid gearbox
Inner Barrel: ~385mm
Magazine Capacity: 190rd Hi-Capacity. Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG Magazines
Muzzle Velocity: ~350 FPS (Measured with 0.20g BBs)
Gearbox: Ver 3 QD Spring Full Metal, Fully Upgradeable
Motor: Short Type
Fire Modes: Semi/Full-Auto, Safety
Package Includes: Gun, 2x Magazines, Extra AEG Spring, Manual
Battery: 8.4v Small Brick Type / 7.4v mini lipo recommended (Wired to rear w/ small Tamiya. Battery not included)
Hopup: Yes, Adjustable