AmpFlow motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of rare-earth magnet materials.
This motor has been used for many years by champion robot builders.
This is a smaller, lighter version of the popular A28-400. Same diameter and powerful magnets, just in a shorter, lighter package! And would you believe a whopping 3 horsepower from a 3.8lb motor?
| Specs |
| Diameter | 3.0 in. |
| Length | 4 in. |
| Peak Horsepower | 3.0 |
| Peak Torque | 1970 oz-in |
| Efficiency | 82% |
| RPM at 24V | 6000 rpm |
| Shaft Diameter | 1/2 in. |
| Shaft Length | 2 in. |
| Keyway | 1/8 in. |
| Capacitors | Yes |
| Magnet Type | Neodymium |
| No Load Amps | 3.4 Amps |
| Stall Current | 285 Amps |
| Terminal Resistance | .064 Ohms |
| Kt | 5.32 oz-in/Amp |
| Kv | 254 rpm/Volt |
| Rotor Inertia | .02 oz-in-sec^2 |
| Thermal Resistance | 3.2 degC/Watt |
| Weight | 3.8 lbs. |
0-A28-150
Tech Specs and Tips
IGES File (courtesy of Kevin Barker)
SolidWorks File (courtesy of Kevin Barker)