The ParkBEC is the smallest and lightest switch-mode BEC on the market. ParkBEC powers your receiver and servos much more efficiently than a standard BEC. As many as six sub-micro servos can be powered without worrying about an overheating BEC. ParkBEC works great up to very high voltages, and is especially suited for running parkflyer type aircraft. ParkBEC is often a necessity at 4s and above.

Many people don't realize that their ESC's BEC rating is misleading. With the linear BEC built into most speed controls, the current rating decreases as pack voltage increases. For example, several popular 25A ESCs with "3A" BECs are only capable of supplying 0.5A when running from a 3s pack. Because it is an efficient switching regulator, ParkBEC can supply its full rated current of 1.25A all the way up to 8s.

ParkBEC was carefully designed to not create radio interference. It uses a shielded inductor and optimized layout, so you can use it without fear of glitching.

The ParkBEC installs between your ESC and receiver, so you don't have to modify your speed control to disable its internal BEC. Just plug ParkBEC in!

For best results, ensure that the ParkBEC is installed at least 2 inches away from your receiver and antenna.

ParkBEC cannot power multiple digital servos.

Specifications

Input voltage	6V to 33.6V
Output Current	1.25A continuous
Output Voltage	5V
Size	37mm x 15.5mm x 14mm
Weight	0.22 oz (6.2g) with wires/0.14 oz (4.1g) without wires

Owner's Manual

No reviews or comments have yet been entered for this product. Please click here to add your own!