Triton2 is the sequel to ElectriFly's revolutionary Triton charger. In addition to all existing features found on the original, Triton2 includes several feature upgrades and improvements. Maximum charge current has been increased to 7A. The LCD now includes a blue backlight for easy viewing even in poorly lit areas. T2 can handle LiPo packs having up to 5 cells wired in series. The input lead has pre-installed banana plugs, and large alligator clips are included which can be mated directly to the banana plugs for easy connection to different types of supply terminals. The rotating dial has been modified for easier control. Plus, the instructions have been completely re-formatted for ease of use.All of this, while maintaining the same great quality and performance that made Triton famous.

Features
Great for many applications including Airplane and Heli Batteries, Tx and Rx batteries, Field Batteries and more
Handles: 1-24 cell NiCd/MH (1.2 - 28V); 1-5 cell Li-Ion or LiPo (3.6 or 3.7V cells); 6, 12, 24V Pb cell (2V per cell)
Precision Zero DeltaV Peak Detection with adjustable sensitivity for NiCd and NiMH batteries
"Constant Current / Constant Voltage" charge method for Pb and Li-Ion/LiPo batteries
Fast Charge Thermal Cutoff (GPMM3151 Thermal Probe available separately)
Top-Off Charge feature fully charges NiMHs without overheating
0-250mA adjustable TRICKLE Charge current (NiCd and NiMH only)
.1-3A Adjustable Discharge Current
Adjustable Discharge Cutoff Voltages for NiCd/MH, pre-set voltages for Pb and LiPo/Ion
Perform 1 to 10 cycles (NiCd/MH only)
Recall data for 10 full cycles
Configure up to 10 batteries in memory for instant, easy recall and charger setup
Displays Input and Output Volts, Peak Volts, Avg Dsch Volts, Chg and Dsch Capacity, Currents and Time, Error Messages (No Battery Connected, Open Circuit, and Reverse Polarity)
Audible sound cues aid in programming and notification of function changes
Warning messages for Improper Input Voltage, Poor Connections, Unsuitable Battery Condition, Reverse Polarity on output
Safety features include Cool-Off Time Delay, Maximum NiMH Charge Input, Fast Charge Safety Timer, Current Overload and Reverse Polarity Protection
Built-in cooling fan for better charge efficiency and extended charger life
Small and lightweight, with a super-sturdy aluminum case for rugged durability

Specs
Input Voltage: 11-15V DC
Input Connections: Banana plugs with mating 'gator clips
Number of Outputs: One
Battery Types, # cells: 1-24 NiCd/MH (1.2-28V); 1-5 Li-Ion or LiPo (3.6 or 3.7V cells); 6, 12, 24V Pb (2V per cell)
Fast Charge Current: .1-7A linear NiCd/MH (.1A step, 90W max); 1C rating for LiPo/Li-Ion (90W max)
Fast Charge Termination: Zero DeltaV Peak Detection NiCd/MH; CC/CV for Pb and Li-Ion/LiPo; Optional Thermal Cutoff for all Battery Types
Peak Sensitivity: NiCd 5-20mV, NiMH 3-15mV
Peak Delay at Start: 0-60 minutes
TRICKLE Charge Current: 0-250mA (NiCd/MH only)
Fast Charge Safety Timer: 0-990 minutes
NiMH Max. Charge Cap: 0-9900mAh
NiMH Top Off Charge: 0-1000mA
Thermal Cutoff: 50-150¡F (10-65¡C), sensor optional
Discharge Current: .1-3A
Discharge Cutoff Voltage: NiCd/MH .5-1.16V per cell (.9V/cell fixed during cycle); Pb fixed at 1.8V per cell; Li-Ion/LiPo fixed at 2.8V per cell
Cycle Count: 1-10 cycles (NiCd/MH only)
Cycle Time Delay: 1-60 minutes
Battery Memories: 10 battery memories
Programming Controls: Modified jog dial, 2 pushbuttons
Display Type: 2 x 16 LCD with Blue backlight
Displayed Info: Input and Output Volts, Peak Volts, Avg Dsch Volts, Chg and Dsch capacity, Currents & Time, Data for 10 cycles, Errors
Audible Indicators: 10 Melodies. BUZZER OFF turns tones OFF.
Output Connectors: Banana jacks
Case Material: Extruded aluminum
Cooling System: Built-in fan
Current Overload: solid state
Case Size: 6.2 x 4 x 2 in (157 x 102 x 51mm)
Weight: 16.4oz (466g)

Note: This charger requires either an external 12VDC Power Supply or Battery, it does NOT plug in to 110V AC power

Thermal Probe for Triton Charger

Triton JR DC Computer Charger