Converting a signal from analog to digital form requires processing time -- what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there's no lag, either -- just virtually instantaneous, real-time response.

This is the Mode-1 Right Hand Throttle and Left Hand Elevator version.

Features:
-Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
-Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
-Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model
-Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict
-No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs
-When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter
-Purpose built custom IC chips for key functions; no off-the-shelf IC chips
-One year limited warranty

Includes:
Futaba 10C Transmitter with Module
NT8S700B 9.6V 700mAh NiCd Transmitter Battery
NR4J 600mAh NiCd Receiver Battery
FBC-19B RX, TX Wall Charger
R6014FS Receiver
Switch Harness
8" (203mm) Servo Extension
Neck Strap

Specs:
Transmitter:
Power Supply: 9.6V
Receiver:
Receiving Frequency: 2.4GHz
Power Requirement: 4.8 - 6V
Current Drain: 70mA
Weight: 0.72oz (20.8g)