0-EFLA1010

10-Amp Pro Brushless ESC

<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2-3 cell Li-Po battery packs and up to four sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low voltage cutoff, braking, timing and throttle input range.</font></p>

<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Features</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>

Up to 10 amps continuous current with proper air flow<br>

Programmable motor braking<br>

Safe power-arm mode prevents accidental starts<br>

Programmable low voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage<br>

Programmable throttle input range (1.1ms&ndash;1.9ms or Auto Select)<br>

Auto motor shut down if signal is lost or there is interference<br>

Programmable timing&mdash;2 user-selectable ranges for use with a large variety of brushless motors<br>

Pre-wired connectors&mdash;JST on battery input and 2mm female gold bullets on motor output leads<br>

Soft start</font></p>

<table width="100%" border="1" cellpadding="0" cellspacing="0" bordercolor="999999">

<tr>

<td colspan="2"><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Specs</font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Brake</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Yes - Programmable </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Continuous Max Current </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">10 Amps </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Input Connector Types </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">20 AWG with JST connector </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Output Connector Types </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">20 AWG with 2mm Female Gold Bullet connectors </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Momentary Peak Current </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">12A (15 sec) </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Dimensions</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">17.5 x 30 x 10 mm </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Weight</font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">0.35 oz. (10g) </font></td>

</tr>

<tr>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Cells with BEC </font></td>

<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">2-3S LiPo<br>

6-10 NiMH/NiCad</font></td>

</tr>

</table>