Products 1-3 of 3
Show
Kitbots Mounting Plates for FingerTech Spark/Silver Spark Motors
Price: $24.50
View
Availability: Available
Item #: FTMP1 -

Each set includes two plates, four 2-56 x 3/16" screws and eight #2 Plastite screws - enough to mount two motors. The plates are precision water cut from 0.060" 6061 Aluminum to fit on the end plate of the FingerTech Spark and Silver Spark Motors.The 2-56 screws secure the plate to the motor (loctite recommended) and the four #2 Plastite screws are used to mount the plate to your chassis. All you need to mount the motor to your chassis is cut a hole big enough for the motor body and four pilot...

Kitbots 1000 RPM Gearmotor
Price: $16.00
View
Availability: Available
Item #: 1000RPM -

These gearmotors are used in the Kitbots Weta Kits. Team Rolling Thunder has put together an instructional page detailing modifications for more reliable motor use in combat robotics. Mounting can be accomplished using the Kitbots Mounting Plates designed for this motor. SpecsNominal voltage: 12VMeasured RPM at nominal voltage: 930 RPMMax recommended voltage: 12VRated torque: 0.5kg.cmNo-load rated current: 0.9AWeight: approx 3.0ozShaft: 4mmNote: It is recommended that you use a a 1uF 200v...

Kitbots Mounting Plates for 1000 RPM Motor
Price: $24.50
View
Availability: Available
Item #: 1000RPMMNT -

Each set includes two plates, four M3x5 screws and eight #4 Plastite screws - enough to mount two motors. The plates are precision watercut from 1/16" 6061 Aluminum to fit on the end plate of the 1000 RPM motor.The two M3 screws secure the plate to the motor (loctite recommended) and the four #4 Plastite screws are used to mount the plate to your chassis. All you need to mount the motor to your chassis is cut a hole big enough for the motor body and drill four pilot holes for the #4 screws.The...