Products 73-96 of 110
Show
DuraTrax Throttle Stop Screw G-27CX
Retail: $1.99
Price: $1.79
View
Availability: In Stock
Item #: DTXG0814 -

0-DTXG0814

Duratrax Slipper Bushing: Evader ST
Retail: $2.99
Price: $2.89
View
Availability: Available
Item #: DTXC9305 -

This is a Slipper Bushing Set for the Duratrax Evader ST.These bushings are located on the main shaft.FEATURESBrass constructionINCLUDESOne Spur Gear Bushing (key #86)One Small Slipper Bushing (key W)REQUIREMENTSAssembly onto Evader STSPECIFICATIONSSpur gear bushing diameter: 9.5mm (0.38")Slipper bushing diameter: 8mm (0.32")0-DTXC9305

Duratrax Slipper Spring: Evader ST
Retail: $1.99
Price: $1.90
View
Availability: Available
Item #: DTXC9380 -

This is the Slipper Spring for the Evader Slipper Clutch.FEATURESBlack steel constructionINCLUDESOne spring (key# 87)SPECIFICATIONSLength: 7.69Diameter: 6.3 OD0-DTXC9380

DuraTrax Bearing 1/4x3/8 (2)
Retail: $6.99
Price: $3.99
View
Availability: Available
Item #: DTXC1429 -

0-DTXC1429

Duratrax Hub Carrier Front (2): Evader ST
Retail: $2.99
Price: $2.69
View
Availability: Available
Item #: DTXC8031 -

Hub Carrier Front(2): Evader ST0-DTXC8031

Duratrax Kingpin (2): Evader ST
Retail: $2.99
Price: $2.89
View
Availability: In Stock
Item #: DTXC8199 -

These are replacement King Pins for the Duratrax Evader ST.FEATURESSteel constructionINCLUDESTwin King Pins and four 2.75 x 5.5 x .8mm kingpin spacersREQUIREMENTSE-Clip (2mm)SPECIFICATIONSLength: 35mm (1.378")Diameter: 2.4mm (0.096")Ball Diameter: 4.3mm (0.172")0-DTXC8199

DuraTrax Shock Parts Set Evader ST
Price: $2.69
View
Availability: Available
Item #: DTXC9068 -

This is the Shock Parts Set for the Duratrax Electric Evader.FEATURESBlack plastic parts for replacing damaged shock parts.INCLUDESTwo pivot ballsTwo plastic ball endsTwo plastic lower spring retainersTwo black shock pistonsInstructionsREQUIREMENTSDisassembling shock to install parts0-DTXC9068

Duratrax Hub Rear (2): Evader ST
Retail: $3.49
Price: $2.99
View
Availability: In Stock
Item #: DTXC8070 -

These are Replacement Rear Hubs for the Duratrax Evader EP.FEATURESBlack Plastic ConstructionIncludes plastic spacersIncludes metal Axle SleevesINCLUDESOne Left Hub (#26)One Right Hub (#27)Four Washers (#58)Two Axle Sleeves (#88)REQUIREMENTSEvaderSPECIFICATIONSHub Washer SleeveLength: 31.8 mm (1.25") n/a n/aWidth: 16.8 mm (0.66") 1.3 mm (0.05") 4.3 mm (0.17")Height: 19.1 mm (0.75") n/a n/aInner Diameter: n/a 3.8 mm (0.15") 5.3 mm (0.21")Outer Diameter: n/a 7.6 mm (0.30") 6.9 mm...

DuraTrax Front Brace: Evader ST
Price: $2.69
View
Availability: Available
Item #: DTXC6612 -

This is the Front Brace for the Duratrax Evader. It mounts between the upperchassis and the front bulkhead. It also supports the servo saver.FEATURESPlastic constructionBlack in colorINCLUDESOne Front BraceREQUIREMENTSDirect replacment part, nothing needed.SPECIFICATIONSLength: 3.1" (79mm)Width: 2.6" (66mm)Height, including standoffs: .6" (15mm)0-DTXC6612

DuraTrax Aluminum Servo Arm L Shape Blue
Retail: $8.99
Price: $7.99
View
Availability: Available
Item #: DTXM5030 -

This is the Red Duratrax L Shaped Servo Arm.FEATURESAluminum construction, anodized red in colorThree plastic adapters allow horn to be used with Futaba, JR,KO Propo, Airtronics/Sanwa, Hitec, Tower Hobbies and Hobbico brandservosOne large and one small diameter linkage holesINCLUDESOne Red Duratrax L Shaped Servo Arm with three plastic adaptersREQUIREMENTSFastening to servo shaftSPECIFICATIONSThickness: 0.07" (1.9mm)Length: 1.0" (26.8mm) both arms0-DTXM5030 ...

Duratrax Shock Tower Front: Evader ST
Retail: $3.99
Price: $3.59
View
Availability: Available
Item #: DTXC9254 -

This is the Stock replacement Front Shock Tower for the Duratrax Evader.This part bolts directly to the chassis.FEATURESStress-Tech partThree different shock mounting positionsINCLUDESOne Rront Shock Tower (key #49)REQUIREMENTSAssembly onto Duratrax EvaderSPECIFICATIONSLength at farthest shock mounting positions: 85mm (3.35")Thickness: 6.6mm (0.26")COMMENTSCurrently, there is no optional part that replaces this shock tower.0-DTXC9254 ...

Duratrax Slipper Plate Set, Hard Anodized: Evader ST
Retail: $17.99
Price: $15.99
View
Availability: Available
Item #: DTXC9314 -

This is the replacement Slipper Plate from Duratrax.This will work for the Evader BX, EP and Nitro Evader.This two piece plate fits between the gearbox and the spur gear.FEATURESHard anodized aluminumINCLUDESOne slippper plateREQUIREMENTSRemoval of spur gear to install0-DTXC9314

Duratrax Slipper Pad, Blue (2): Evader ST/BX
Retail: $2.99
Price: $2.69
View
Availability: In Stock
Item #: DTXC9322 -

Slipper Pad, Blue (2): Evader ST/BX0-DTXC9322

Duratrax Shock Tower Front: Evader EXT
Retail: $2.99
Price: $2.69
View
Availability: Available
Item #: DTXC9271 -

This is the replacement Front Shock Tower for the Duratrax Evader EXTFEATURESComposite nylon construction, black in colorReplaces a worn or damaged shock towerINCLUDESOne Front Shock Tower - key number 49REQUIREMENTSInstallation following the model manualSPECIFICATIONSLength: 3.17" (81mm)Width: 3.31" (84mm)0-DTXC9271

DuraTrax Bulkhead Front: Evader ST
Price: $3.59
View
Availability: Available
Item #: DTXC6809 -

This is the stock replacement front bulkhead set for the Duratrax Evader ST.The Suspension arms and Shock Tower mount to this.FEATURESBlack nylon constructionINCLUDESOne front bulkhead (key #51)One 3mm bulkhead hinge pin (key #103) 36.5mm longOne suspension pin plate (key #82) 54.4mm long 3.5mm thickREQUIREMENTSAssembly onto Evader STSPECIFICATIONSC.D. between suspension mounting holes: 46mm (1.82")Pin length: 36.8mm (1.45")0-DTXC6809 ...

DuraTrax Flywheel Assembly
Price: $14.99
View
Availability: Available
Item #: DTXP5002 -

This is the Stock "FLYWHEEL" or Starter Wheel for theDuraTrax 1/8 Scale Starter Box.FEATURESOne Rubber Starting Wheel with a Keyed Metal CenterThe Center is Keyed to Fit the Existing ShaftSPECIFICATIONSOuter Diameter: 3-7/8"Thickness: 5/8"Hole in the Center: 6mmINCLUDESOne Fly Wheel AssemblyCOMMENTSThe key on the shaft is NOT used, instead the shaft is only bolted0-DTXP5002

Idler gear metal and shaft
Price: $4.49
View
Availability: Available
Item #: DTXC8092 -

0-DTXC8092

Duratrax Bearing 5 x 10mm (2)
Retail: $4.99
Price: $2.99
View
Availability: Available
Item #: DTXC1535 -

Bearing 5 x 10mm (2)0-DTXC1535

Shock tower front EVBX
Price: $3.59
View
Availability: Available
Item #: DTXC9201 -

0-DTXC9201

Shock tower rear EVBX
Price: $3.59
View
Availability: Available
Item #: DTXC9202 -

0-DTXC9202

brushless esc programmer
Price: $24.99
View
Availability: Available
Item #: dtxm1350 -

0-dtxm1350

Duratrax 48 Pitch Spur Gear, 88T: Evader ST
Retail: $2.99
Price: $2.69
View
Availability: In Stock
Item #: DTXC9403 -

48P Spur Gear, 88T: Evader ST0-DTXC9403

DuraTrax 32 Pitch Spur Gear, 56T: Nitro Evader BX
Retail: $3.99
Price: $3.59
View
Availability: Available
Item #: DTXC9397 -

This is the Spur Gear for the Duratrax Nitro Evader BX.FEATURESBlack plastic spur gear56 tooth32 pitchINCLUDESOne plastic spur gear, key #16REQUIREMENTSAssembly onto the Nitro Evader BX.COMMENTSThis will work only on the Nitro Evader BX.0-DTXC9397

Duratrax Machine Screw 4-40 x 5/16in. (10)
Price: $1.99
View
Availability: Available
Item #: DTXC8631 -

These are 4-40x5/16" Flat Head Machine Screws by DuraTrax.FEATURESPlain black steel construction.Flat head with a phillips recess drive insert.INCLUDES(10) ScrewsSPECIFICATIONSThread Size: 4-40Length: 5/16"0-DTXC8631