Products 1-24 of 95
Show
Duratrax 550 Size Motor
Price: $11.99
View
(8)
Availability: On Order
Item #: DTXP5737 -

This is a great little workhorse motor. A popular size for RC enthusiasts, we can now make this motor available to everyone at a great price. High performance in a small, inexpensive motor. Now comes with a 16T, 3mm pitch pulley press fit onto the motor shaft. (We can remove this pulley from the shaft if you prefer, just choose the option from the above pop-up menu). Outer Shaft Diameter: 0.58 in. Inner Hole Diameter: 3mm   Speed : 24,000 rpm @ 12V Angular velocity constant: 2000 rpm/V...

Duratrax Ball Cup, Black: EVST
Retail: $6.99
Price: $6.29
View
Availability: Available
Item #: DTXC6181 -

Fourteen replacement black Ball Cups for the Duratrax Evader ST. These are used on the ball studs.Length: 26mm (1.02")Inside shaft diameter: 3mm (0.19")Ball cup diameter: 4.4mm (.174") 0-DTXC6181

Duratrax Battery Sponge Spacer: EVST
Retail: $1.99
Price: $1.79
View
Availability: Available
Item #: DTXC6282 -

This is the stock replacement battery sponge spacer for the Duratrax Evader ST. This part goes inbetween the battery pack and the rear bulkhead.Length: 45mm (1.77")Width: 25mm (0.99")Height: 30mm (1.19")0-DTXC6282

Duratrax Battery Strap Graphite: EVST BX
Price: $9.99
View
Availability: Available
Item #: DTXC6297 -

This is the Graphite Battery Hold-Down for the Electric Evader ST and BX Pro and will work on the original Electric Evader as well. This holds the battery in place and secures it to the chassis.Length: 172mm (6.75")Width: 19mm (3/4")Height: 6.4mm (1/4")IncludesOne battery hold down strap (key# 23) w/pre-installed foam rubber strip (key# 68)One metal body pin (key# 118)0-DTXC6297

Duratrax Kingpin (2): Evader ST
Retail: $2.99
Price: $2.39
View
Availability: Discontinued
Item #: DTXC8199 -

These are replacement King Pins for the Duratrax Evader ST.FEATURESSteel constructionINCLUDESTwin King Pins and four 2.75 x 5.5 x .8mm kingpin spacersREQUIREMENTSE-Clip (2mm)SPECIFICATIONSLength: 35mm (1.378")Diameter: 2.4mm (0.096")Ball Diameter: 4.3mm (0.172")0-DTXC8199

DuraTrax Glow Starter D Battery
Retail: $9.99
Price: $8.99
View
Availability: Available
Item #: DTXP0305 -

This is a DuraTrax Glow-Starter for use with "D" sized Alkaline Batteries.This glow starter heats the glow plug during starting of a glow engine.FEATURESPowered by replaceable alkaline D-size cells (not included), whichoffer more capacity than NiCds, and at a lower price. UnlikeNiCds, alkaline batteries provide the convenience of not needingto be charged overnight before a day of racing.D-Cell is enclosed inside a high-impact black polystyrene casewith an easy-access hatch for quick...

DuraTrax 1600mAh 7.2V 6-Cell NiMH Stick Pack - Mini Quake/Cliff Climber
Retail: $29.99
Price: $19.99
View
Availability: On Order
Item #: DTXC2193 -

This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack.FEATURESFor use with the Duratrax Vendetta, Mini Quake and Cliff Climber butcan also be used in other 1/18 scale applicationsINCLUDESDuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack with minifemale connectorREQUIREMENTSCharger capable of charging NiMH batteries, such as the DuraTraxIntelliPeak series or the Great Planes TRITON seriesSPECIFICATIONSCapacity: 1600mAhCell Size: 2/3A# of Cells in Series: 6Rated Voltage: 7.2VMin....

Duratrax Hub Rear (2): Evader ST
Price: $3.49
View
Availability: In Stock
Item #: DTXC8070 -

These are Replacement Rear Hubs for the Duratrax Evader EP.FEATURESBlack Plastic ConstructionIncludes plastic spacersIncludes metal Axle SleevesINCLUDESOne Left Hub (#26)One Right Hub (#27)Four Washers (#58)Two Axle Sleeves (#88)REQUIREMENTSEvaderSPECIFICATIONSHub Washer SleeveLength: 31.8 mm (1.25") n/a n/aWidth: 16.8 mm (0.66") 1.3 mm (0.05") 4.3 mm (0.17")Height: 19.1 mm (0.75") n/a n/aInner Diameter: n/a 3.8 mm (0.15") 5.3 mm (0.21")Outer Diameter: n/a 7.6 mm (0.30") 6.9 mm...

DuraTrax Front Brace: Evader ST
Price: $2.69
View
Availability: Available
Item #: DTXC6612 -

This is the Front Brace for the Duratrax Evader. It mounts between the upperchassis and the front bulkhead. It also supports the servo saver.FEATURESPlastic constructionBlack in colorINCLUDESOne Front BraceREQUIREMENTSDirect replacment part, nothing needed.SPECIFICATIONSLength: 3.1" (79mm)Width: 2.6" (66mm)Height, including standoffs: .6" (15mm)0-DTXC6612

Duratrax Machine Screw 4-40 x 5/16in. (10)
Price: $1.99
View
Availability: Available
Item #: DTXC8631 -

These are 4-40x5/16" Flat Head Machine Screws by DuraTrax.FEATURESPlain black steel construction.Flat head with a phillips recess drive insert.INCLUDES(10) ScrewsSPECIFICATIONSThread Size: 4-40Length: 5/16"0-DTXC8631

DuraTrax Bulkhead Front Nitro Evader ST
Retail: $4.99
Price: $4.49
View
Availability: Available
Item #: DTXC6805 -

This is the stock Front Bulkhead Set for the Duratrax Evader ST.The Suspension Arms and Shock Tower mount to this.FEATURESBlack nylon constructionStress Tech partINCLUDESOne front bulkhead (key #51)REQUIREMENTSAssembly onto Nitro Evader STSPECIFICATIONSCenter distance between suspension mounting holes: 1.8" (46mm)0-DTXC6805

DuraTrax Shock Set Front Assembled (2): Evader ST
Retail: $17.99
Price: $15.49
View
Availability: Available
Item #: DTXC9003 -

This is the Front Shock Set for the Evader by Duratrax.FEATURESNatural Aluminum shock bodyYellow shock Springs (DTXC9230)Black plastic shock mounting partsINCLUDESTwo Fully Assembled shocksREQUIREMENTSInstalling on the vehicleSPECIFICATIONSLength: 98mm extended73mm contracted0-DTXC9003

DuraTrax Ultimate Body Reamer
Retail: $29.99
Price: $19.99
View
Availability: Available
Item #: DTXR1157 -

This is the DuraTrax Ultimate Body Reamer.FEATURESDesigned to create and enlarge holes in Lexan, ABS, balsa,polycarbonate-almost any hobby material.Extra sharp point starts holes quickly and precisely; razor sharpflutes remove debris while cutting for clean, perfect results.Handle is made of knurled anodized aluminum for a securecomfortable grip.A cap protects reamer tool when not in use, and fits onto the handlebase during cutting.Blue anodized handle and safety cap.INCLUDESOne DuraTrax...

DuraTrax Aluminum Servo Arm L Shape Blue
Retail: $8.99
Price: $7.99
View
Availability: Available
Item #: DTXM5030 -

This is the Red Duratrax L Shaped Servo Arm.FEATURESAluminum construction, anodized red in colorThree plastic adapters allow horn to be used with Futaba, JR,KO Propo, Airtronics/Sanwa, Hitec, Tower Hobbies and Hobbico brandservosOne large and one small diameter linkage holesINCLUDESOne Red Duratrax L Shaped Servo Arm with three plastic adaptersREQUIREMENTSFastening to servo shaftSPECIFICATIONSThickness: 0.07" (1.9mm)Length: 1.0" (26.8mm) both arms0-DTXM5030 ...

Duratrax Slipper Plate Set, Hard Anodized: Evader ST
Retail: $17.99
Price: $14.99
View
Availability: Available
Item #: DTXC9314 -

This is the replacement Slipper Plate from Duratrax.This will work for the Evader BX, EP and Nitro Evader.This two piece plate fits between the gearbox and the spur gear.FEATURESHard anodized aluminumINCLUDESOne slippper plateREQUIREMENTSRemoval of spur gear to install0-DTXC9314

Duratrax Slipper Pad, Blue (2): Evader ST/BX
Retail: $2.99
Price: $2.69
View
Availability: In Stock
Item #: DTXC9322 -

These are the replacement Slipper Pads from Duratrax.These work on the Evader trucks.FEATURESBlue rubber slipper pads, Key #64INCLUDESTwo slipper pads for the Duratrax electric Evader truck0-DTXC9322

Duratrax Shock Tower Front: Evader EXT
Retail: $2.99
Price: $2.69
View
Availability: Available
Item #: DTXC9271 -

This is the replacement Front Shock Tower for the Duratrax Evader EXTFEATURESComposite nylon construction, black in colorReplaces a worn or damaged shock towerINCLUDESOne Front Shock Tower - key number 49REQUIREMENTSInstallation following the model manualSPECIFICATIONSLength: 3.17" (81mm)Width: 3.31" (84mm)0-DTXC9271

DuraTrax Bulkhead Front: Evader ST
Price: $3.59
View
Availability: Available
Item #: DTXC6809 -

This is the stock replacement front bulkhead set for the Duratrax Evader ST.The Suspension arms and Shock Tower mount to this.FEATURESBlack nylon constructionINCLUDESOne front bulkhead (key #51)One 3mm bulkhead hinge pin (key #103) 36.5mm longOne suspension pin plate (key #82) 54.4mm long 3.5mm thickREQUIREMENTSAssembly onto Evader STSPECIFICATIONSC.D. between suspension mounting holes: 46mm (1.82")Pin length: 36.8mm (1.45")0-DTXC6809 ...

DuraTrax Flywheel Assembly
Price: $14.99
View
Availability: Available
Item #: DTXP5002 -

This is the Stock "FLYWHEEL" or Starter Wheel for theDuraTrax 1/8 Scale Starter Box.FEATURESOne Rubber Starting Wheel with a Keyed Metal CenterThe Center is Keyed to Fit the Existing ShaftSPECIFICATIONSOuter Diameter: 3-7/8"Thickness: 5/8"Hole in the Center: 6mmINCLUDESOne Fly Wheel AssemblyCOMMENTSThe key on the shaft is NOT used, instead the shaft is only bolted0-DTXP5002

DuraTrax 1600mAh 7.4V 2S Double Cell 20C LiPo Pack - Mini Plug
Retail: $32.99
Price: $22.99
View
Availability: In Stock
Item #: DTXC1855 -

Specs Capacity 1600mAh Number of Cells 2 Rated Voltage 7.4V Continuous Discharge Rate 20C Max. Charge Current 1.6A (1C) Charge Lead 24AWG 30mm wire with XH Balance Plug Discharge Lead 20AWG 90mm wire with Mini Plug Dimensions 3.3 x 1.2 x 0.7 in. (85 x 31 x 17 mm) Weight 3 oz. 0-DTXC1855 ...

DuraTrax 1800mAh 7.4V 2S Double Cell 30C LiPo Pack - Bullet Connector
Retail: $49.99
Price: $34.99
View
Availability: Available
Item #: DTXC1860 -

This is the DuraTrax LiPo 7.4V 1800mAh 30C Hard Case Mini Battery Pack with 3.5mm Bullets.FEATURESFor use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other1/16 to 1/18 scale vehiclesINCLUDESDuraTrax LiPo 7.4V 1800mAh 30C Hard Case Battery Pack with 3.5 malebullets to make battery leadREQUIREMENTSBalancer such as the Team Checkpoint Balancer, and 2S 3.5mmAdapterSPECIFICATIONSCapacity: 1800mAhNumber of Cells in Series: 2Rated Voltage: 7.4VContinuous Discharge Rate: 30CMaximum...

Duratrax Locknut 3mm (10)
Retail: $1.99
Price: $1.90
View
Availability: Available
Item #: DTXC8240 -

These are 3mm Locknuts by DuraTrax.FEATURESPlain steel construction with nylon inserts.INCLUDES(10) LocknutsSPECIFICATIONSDiameter: 3mm0-DTXC8240

Duratrax Slipper Bushing: Evader ST
Retail: $2.99
Price: $2.89
View
Availability: Available
Item #: DTXC9305 -

This is a Slipper Bushing Set for the Duratrax Evader ST.These bushings are located on the main shaft.FEATURESBrass constructionINCLUDESOne Spur Gear Bushing (key #86)One Small Slipper Bushing (key W)REQUIREMENTSAssembly onto Evader STSPECIFICATIONSSpur gear bushing diameter: 9.5mm (0.38")Slipper bushing diameter: 8mm (0.32")0-DTXC9305

DuraTrax Onyx 210 AC/DC Peak Charger with LCD
Retail: $74.99
Price: $49.99
View
Availability: Available
Item #: DTXP4210 -

This is the DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD.Charge currents of 800mA, 1.5A, 3A and 5A plus 4-8 cell NiCd or NiMHcompatibility makes this charger great for 1/18-1/8 scale electrics,nitro receiver packs and even transmitter batteries.FEATURESCharges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells with a capacityrange of 750-7500mAhNiCd and NiMH compatibility with custom peak detectionPushbutton controls, audible tones and a custom LED with backlightfor easy setup and useSelectable...